Tennant CS16 Corded Floor Scrubber

Quick Start Guide

This guide is intended for quick consultation only and does not replace the user and maintenance manual. Before using the machine, read the user and maintenance manual contained in the machine's packaging thoroughly and strictly follow all the instructions. This document provides a rapid consultation for operating the machine.

Step 1: Prepare Solution Tanks

Add clean water (H₂O) and the appropriate cleaning solution (CHEM) to the designated tanks.

Step 2: Connect Power

Plug the machine's power cord into a suitable electrical outlet.

Step 3: Squeegee Check

Ensure the squeegee is correctly positioned and ready for operation.

Step 4: Power On

Press the ON/OFF button to power on the machine. The indicator lights will illuminate.

Step 5: Select Cleaning Mode

Choose the desired cleaning mode. The 'AUTO' mode is available, indicated by a light. Other modes may be selectable.

Step 6: Begin Scrubbing

Move the machine forward. The brush and vacuum will activate to clean the floor.

Step 7: Stop Operation

Release the drive lever to stop the machine's movement. Turn the machine OFF using the ON/OFF button.

Step 8: Auto Mode Functionality

In 'AUTO' mode, the machine automatically optimizes brush speed and solution flow for efficient cleaning.

Step 9: Control Panel Overview

The control panel provides access to power, brush, vacuum, and solution controls. Indicators show machine status.

Step 10: Adjust Handle

Adjust the handle to a comfortable height for the operator.

Step 11: Solution Dispensing

Water and cleaning solution are automatically dispensed onto the floor during the scrubbing process.

Step 12: Post-Operation Procedures

After use, turn the machine OFF, disconnect the power cord, and perform necessary cleaning and maintenance as per the full manual.

Maintenance: Cleaning Debris Tray

Periodically remove and clean the debris tray to maintain machine performance. Ensure it is properly reinstalled.

Maintenance: Brush/Pad Replacement

Follow the instructions to safely remove and replace the cleaning brush or pad. Ensure the new brush/pad is correctly installed (indicated by a green checkmark ✔️) and not incorrectly installed (indicated by a red cross ❌).

Important Safety Note

Always refer to the full user and maintenance manual for complete safety instructions and detailed procedures. Pay attention to warning symbols ⚠️.

	T291 Floor Scrubber (Dual Disk) Quick Guide \| Tennant A concise quick guide for operating the Tennant T291 Floor Scrubber (Dual Disk). This document outlines essential steps for setup, operation, and mode selection, emphasizing safety and proper usage. Always refer to the full user and maintenance manual for comprehensive instructions.
	Tennant T681 Floor Scrubber (Cylindrical Brush Model) Quick Guide Concise quick guide for operating the Tennant T681 Floor Scrubber with a cylindrical brush model, covering basic operational steps and controls for efficient floor cleaning.
	Tennant CS5 Floor Scrubber Quick Start Guide \| Operation and Maintenance Concise guide for the Tennant CS5 Floor Scrubber, covering quick setup, operation, and basic maintenance. Learn how to use your Tennant CS5 efficiently.
	Tennant T291 Push Floor Scrubber Quick Guide Concise, step-by-step guide for operating the Tennant T291 Push Floor Scrubber, covering setup, modes, and basic maintenance.
	Tennant T2 Compact Scrubber-Dryer: Features, Specs, and Benefits Explore the Tennant T2, a compact 43 cm scrubber-dryer designed for efficient cleaning in small, congested spaces. Learn about its performance, hygiene features, environmental safety, and technical specifications.
	TENNANT T391 Floor Scrubber: Use and Care Guide Comprehensive guide for the TENNANT T391 floor scrubber, covering pre-use checks, operation, cleaning modes (ECO, Standard), post-use procedures, and weekly maintenance for optimal performance and longevity.
	Tennant T17 Rider Scrubber Operator Manual: Operation, Maintenance, and Safety Guide Comprehensive operator manual for the Tennant T17 Rider Scrubber. Covers operation, maintenance, safety procedures, troubleshooting, and specifications for effective use.
	Tennant T290 Parts Manual: Battery Floor Scrubber Components and Diagrams Explore the official Tennant T290 Parts Manual. Find detailed diagrams, part numbers, and specifications for the Tennant T290 Battery Floor Scrubber (Propel Model) to ensure efficient maintenance and repair.