Haier Heat Pump Water Heaters
Monoblock + Split System
Significantly more efficient than traditional electric water heaters.
Our Brand
Empowering smarter, happier, and healthier living, Haier leads with smart technologies across a range of home appliances. Discover Smart Home Comfort.
- ? Award Winning: #1 SMART AIR CONDITIONING BRAND IN THE WORLD
- ? Global Scale: OPERATING IN 160 COUNTRIES
- ? Innovation + Quality: 10 R&D CENTRES GLOBALLY
- ?️ Service + Support: NATIONWIDE SUPPORT
Heating and cooling expertise
Haier is the world's largest manufacturer of electric hot water systems. Since 1986, Haier has sold over 200 million systems globally. Haier has been manufacturing efficient electric heat pump systems since 2010, selling over 5 million units.
Founded in China in 1984, Haier's customer-centric approach drives the development of smart home appliances blending technological innovation with functionality. Haier was the world's leading brand of Wi-Fi with Bluetooth connected air conditioners in 2024.
In Australasia, Haier's strength is complemented by Fisher & Paykel, a trusted brand within the Haier Group. Together, they leverage Haier's global reach and Fisher & Paykel's local service network to provide industry-leading products and support in Australia and New Zealand.
Haier is a major supporter of tennis globally, serving as the official Home Appliance Partner of the Australian Open and the official Partner of Tennis Australia.
An energy-efficient way to heat your water
Heat Pump Water Heaters bring new innovation to hot water heating, using less energy than standard electric water heaters.
Monoblock System
Efficient design: Haier heat pump technology results in a 64% to 79% reduction in electricity used compared to traditional electric resistance water heaters. Heat is drawn from ambient air, with electricity used only for the compressor and fan.
Respect for the planet: Haier heat pump hot water systems use less electricity and low-impact refrigerants. They also complement solar PV setups, prioritizing solar energy.
Connected living: The SmartHQ™ app provides control, allowing users to adjust heating from anywhere. Five user modes are available: Auto, Eco, Solar PV, Electric, Vacation, and Boost.
Monoblock
Models: 200L, 250L, 330L
Respect for the planet: Highly efficient compared to electric resistance or gas water heaters, complements solar PV systems, runs only on electricity, and uses the natural refrigerant R290.
Global Warming Potential (GWP): R290 has a GWP of 3, significantly lower than R134A (GWP: 1430) and R32 (GWP: 675).
Lower running costs: Heat pump technology results in a 69-79% reduction in electricity used compared to electric resistance water heaters, saving money annually.
Expansive operating range: Performs in most Australian climates from -7°C to 45°C ambient air temperature.
Adapts to your life: The SmartHQ™ app allows selection of five modes: ⚙️ Auto, ? Eco, ☀️ Solar PV, ⚡ Electric, ?️ Vacation, and ? Boost to suit needs, optimize for lower-cost periods, minimize energy use when away, or prioritize solar energy.
Split System
Model: 280L
Lower running costs: Uses approximately 1/3 of the electricity of a traditional electric resistance heater. Haier Split System uses 64-68% less energy.
Fast hot water recovery: Ideal for large families and colder regions, featuring a 4.58kW heating capacity and a boost function for high demand.
Low impact refrigerant: Uses low-impact R32 refrigerant, complementing solar PV systems for lower grid-electricity use. R32 has a GWP of 675.
Installation flexibility: The split design allows the heat pump unit to be placed away from noise-sensitive areas, with the cylinder located inside or outside.
Adapts to your life: Built-in Wi-Fi module and SmartHQ™ app enable remote control. Five user modes (⚙️ Auto, ? Eco, ☀️ Solar PV, ⚡ Electric, ?️ Vacation, ? Boost) allow adjustment for cost, energy saving, or solar prioritization.
Respect for the Planet
Haier's Monoblock is a one-piece water heater designed for energy efficiency and high performance. The Split System incorporates advanced technologies and materials to reduce environmental impact, including solar PV system integration.
Reduced running costs
Heat pump technology offers 69-79% (Monoblock) and 64-68% (Split System) electricity reduction compared to electric resistance heaters, leading to lower electricity bills.
Low GWP refrigerant
Monoblock models use R290 (GWP: 3), 476 times lower than R134A. Split systems use R32 (GWP: 675), a next-generation refrigerant with lower environmental impact than R134A.
Eco mode for lower electricity use
Eco mode optimizes benefits of solar PV and lower cost, time-of-use electricity. Solar PV mode integrates with the system to maximize consumption of solar-generated energy, reducing power bills.
Solar PV ready
Surplus solar energy can be stored as hot water. In Solar PV mode, the system receives a signal from the solar PV system to use generated energy, heating water up to 75°C for later use.
Efficient Design & Connected Living
Haier Heat Pump Water Heaters are designed for hot water reheating efficiency. The Split System offers installation flexibility, while the Monoblock is designed for simple installation.
Designed for efficiency
Utilizes efficient heat pump technology, transferring heat from air to water, resulting in significant electricity savings (69-79% Monoblock, 64-68% Split System) compared to traditional electric resistance water heaters.
Easy installation
Monoblock models follow standard electric storage water heater installation procedures. Split System's separated units offer flexibility in placing the heat pump unit away from noise-sensitive areas.
Fast reheating
The Split System features a 4.58kW heating capacity for rapid reheating, ensuring hot water availability even after large consumption.
Heat boost
The Split System includes a 2.6kW backup booster and a "one-time boost" function for faster recovery during high demand periods.
Longevity
Patented triple-layer protection creates a durable, corrosion-resistant inner tank, tested for over 160,000 cycles.
Quiet operation
Operating noise levels are 43-46dBA for Monoblock and 52dBA for Split System (at 1 meter). The outdoor unit can be placed away from living areas for quiet operation.
Connected Living
The SmartHQ™ app provides remote control of heating, allowing adjustments for hot water needs from anywhere. Users can select from five modes: Auto, Eco, Solar PV, Electric, Vacation, and Boost.
Specifications
Monoblock Heat Pump Water Heater
| Model | HP200M1U1P | HP250M1U1P | HP330M1U1 |
|---|---|---|---|
| Tank Total water capacity | 195L | 246L | 330L |
| Rated voltage/frequency | 220-240V/50Hz | 220-240V/50Hz | 220-240V/50Hz |
| PTR setting | 850kPa | 850kPa | 850kPa |
| Electrical connection | 15A 3-pin plug | 15A 3-pin plug | Hardwired |
| Ingress protection | IP24 | IP24 | IP24 |
| Hot & cold inlet connections | 3/4" RP | 3/4" RP | 3/4" RP |
| PTR connection | 3/4" RP | 3/4" RP | 3/4" RP |
| COP*@ 20°C/15°C | 4.49 | 4.48 | 4.00 |
| Power input of electric element | 1.5kW | 1.5kW | 2.2kW |
| Rated power input of heat pump | 0.43kW | 0.43kW | 0.7kW |
| Maximum power input of heat pump | 0.75kW | 0.75kW | 1.2kW |
| Maximum power input of appliance | 2.25kW | 2.25kW | 3.4kW |
| Average heating capacity by heat pump | 2.0kW | 2.0kW | 2.8kW |
| Default temperature setting | 60°C | 60°C | 60°C |
| Heating range (with element) | 35°C - 75°C | 35°C - 75°C | 35°C - 75°C |
| Heating range (heat pump only) | 35°C - 65°C | 35°C - 65°C | 35°C - 65°C |
| Refrigerant type/weight | R290/0.34kg | R290/0.34kg | R290/0.47kg |
| Refrigerant pipe length | N/A | N/A | N/A |
| Noise | 43dB(A) | 43dB(A) | 47dB(A) |
| Ambient temperature range | -7~45°C | -7~45°C | -7~45°C |
Split System Heat Pump Water Heater
| Model | HP300S2-F7 |
|---|---|
| Tank Total water capacity | 276L |
| Rated voltage/frequency | 220-240V/50 Hz |
| PTR setting | 700kPa |
| Electrical connection | Hardwired |
| Ingress protection | IPX4 |
| Hot & cold inlet connections | 3/4" RP |
| PTR connection | 3/4" RP |
| COP*@ 20°C/15°C | 4.48 |
| Power input of electric element | 2.6kW |
| Rated power input of heat pump | 1.19kW |
| Pair coil tube and connection size - Liquid line | 1/4" (6.35mm)/(7/16 - 20UNF) |
| Pair coil tube and connection size - Suction line | 3/8" (9.52mm)/(5/8 - 18UNF) |
| Maximum power input of heat pump | 1.7kW |
| Maximum power input of appliance | 4.3kW |
| Average heating capacity by heat pump | 4.58kW |
| Default temperature setting | 55°C |
| Heating range (with element) | 35°C - 75°C |
| Heating range (heat pump only) | 35°C - 55°C |
| Refrigerant type/weight | R32/0.93kg |
| Refrigerant pipe length | min. 1m - max. 3m |
| Noise | 52dB(A) |
| Ambient temperature range | -15~45°C |
Performance Data (20°C/15°C Ambient air temperature, 15°C to 55°C water temperature)
| Model | Air temp (°C) | Cold water temp (°C) | Recovery time (hours) | Recovery rate (L/Hr) | Average heating capacity (kW) | Coefficient of Performance (COP) |
|---|---|---|---|---|---|---|
| HP200M1U1P | 19 | 15 | 5.6 | 35 | 2.1 | 4.5 |
| 9 | 8 | 8.2 | 24 | 1.6 | 3.5 | |
| 2 | 8 | 10.2 | 19 | 1.2 | 2.9 | |
| HP250M1U1P | 19 | 15 | 6.9 | 36 | 2.2 | 4.5 |
| 9 | 8 | 10.6 | 23 | 1.6 | 3.5 | |
| 2 | 8 | 12.3 | 20 | 1.2 | 2.9 | |
| HP330M1U1 | 19 | 15 | 5.82 | 57 | 2.8 | 4.0 |
| 9 | 8 | 9.6 | 34 | 2.5 | 3.9 | |
| 2 | 8 | 13.5 | 24 | 1.5 | 2.2 | |
| HP300S2-F7 | 19 | 15 | 2.5 | 110 | 5.1 | 4.3 |
| 7 | 8 | 4.15 | 67 | 3.6 | 3.6 | |
| 2 | 8 | 4.39 | 63 | 3.4 | 2.9 |
Performance results are measured as per AS/NZS 5125.1:2014. HP300S2-F7 performance testing completed with a 3m distance between the heat pump unit and the cylinder.
Warranty and Support
Warranty
With a warranty of up to 7 years on the cylinder, Haier provides peace of mind.
| Cylinder | Refrigeration Components* | Other Components^ | |
|---|---|---|---|
| Domestic Use Parts | 7 years | 5 years | 5 years |
| Domestic Use Labour | 5 years | 5 years | 5 years |
| Commercial Use Parts | 1 year | 1 year | 1 year |
| Commercial Use Labour | 1 year | 1 year | 1 year |
Note on Components: Refrigeration components include the entire heat pump unit (condenser, compressor, expansion valves, pipework) and internal cylinder components. Other components include electrical parts, user interface, heating elements, sensors, and plumbing valves.
Haier goods come with guarantees that cannot be excluded under Australian Consumer Law. This manufacturer's warranty is in addition to any rights and remedies available under Australian Consumer Law.
Federal Small-Scale Technology Certificate (STCs)
Federal STC rebates and state rebates are available to encourage the replacement of inefficient water heating technologies with efficient ones like hot water heat pumps.
| Listed Code | STC Entitlements for 2025 | STC Entitlements for 2026 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Zone 1 | Zone 2 | Zone 3 | Zone 4 | Zone 5 | Zone 1 | Zone 2 | Zone 3 | Zone 4 | Zone 5 | |
| HP200M1U1P | 15 | 15 | 18 | 19 | 19 | 13 | 12 | 15 | 16 | 16 |
| HP250M1U1P | 16 | 15 | 19 | 20 | 19 | 13 | 12 | 16 | 17 | 16 |
| HP330M1U1 | 15 | 14 | 18 | 19 | 19 | 12 | 12 | 15 | 16 | 16 |
| HP300S2-F7 | 13 | 13 | 16 | 18 | 18 | 13 | 13 | 16 | 18 | 18 |
Local Customer Care
Nation-wide Customer Care support and local warehousing of spare parts ensure prompt service for any issues with your water heater.
Make more time for tennis with Haier
Customer Care
Visit the website for more information:
Australia: haierhome.com.au
Customer support and service booking:
Australia: support.haier.com.au/s/book-a-service
