Haier Heat Pump Water Heaters
Monoblock + Split System
Significantly more efficient than traditional electric water heaters.
Our Brand
Empowering smarter, happier, and healthier living, Haier leads with smart technologies across a range of home appliances. Discover Smart Home Comfort.
Haier is the world's largest manufacturer of electric hot water systems. We have been making hot water products since 1986 and during that time have sold over 200 million systems around the globe. Haier has been manufacturing efficient electric heat pump systems since 2010 and have sold over 5 million units during this time.
Founded in China in 1984, Haier's customer-centric approach has fueled the development of smart home appliances that blend technological innovation with functionality, making it the world's leading brand of Wi-Fi with Bluetooth connected air conditioners in 2024.
In Australasia, Haier's strength is complemented by Fisher & Paykel, a trusted brand that is now part of the Haier Group. Together, they leverage Haier's global reach and Fisher & Paykel's local service network to provide industry-leading products and support to customers in Australia and New Zealand.
From grassroots to Grand Slams, Haier is a proud supporter of tennis in Aotearoa New Zealand and around the world.
An energy-efficient way to heat your water
Heat Pump Water Heaters bring new innovation to hot water heating – using less energy than standard electric water heaters.
Efficient design
Haier heat pump technology results in a 64% to 79% reduction in the amount of electricity used to heat the same volume of water, compared to a traditional electric resistance water heater. Heat is drawn in from the surrounding ambient air, with electricity only used for the compressor and the fan, rather than using it to heat the water directly through an electrical element.
Respect for the planet
Haier heat pump hot water systems have lower electricity use, and use low impact refrigerants. They also complement solar PV set-ups, prioritizing solar energy to reduce electricity use.
Connected living
Haier believes in integrating smart technology into the heart of every home. The SmartHQ™ app puts control in your hands, allowing you to adjust heating as your hot water needs change – and do it from anywhere.
Change between five user modes using SmartHQ™ on your smartphone: Auto mode, Eco mode with Solar PV mode, Electric mode, Vacation mode and Boost.
Monoblock
200L, 250L, 330L
Respect for the planet
Highly efficient compared to electric resistance or gas water heaters, complements solar PV systems, runs only on electricity, and uses the natural refrigerant R290.
Lower running costs
The heat pump technology results in a 69-79% reduction in electricity used to heat the same volume of water compared to an electric-resistance water heater.
Expansive operating range
Performance in most New Zealand climates from -7°C to 45°C ambient air temperature.
Adapts to your life
Use the SmartHQ™ app on your smartphone to easily select from five modes to best suit your needs, allowing you to adjust heating to lower-cost periods, minimize energy use when you're on holidays, or prioritize solar energy to reduce grid-supply if you have solar PV.
Energy savings of 69-79% are based on Haier Monoblock 200L, 250L and 330L when compared to a standard electric storage water heater in Zones 1 to 5 in AWHZ5003X 2008.
Split System
Lower running costs
Uses only about ⅓ of the electricity of a traditional electric resistance heater to heat the same volume of water.
Haier Split System 64-68% less energy used than electric resistance water heaters.
Fast hot water recovery
Perfect for large families and homes in colder regions thanks to quick water reheating, with an impressive 4.58kW heating capacity and a boost function for even faster hot water recovery on the occasional high water use days.
Low impact refrigerant
This heat pump water heater uses low-impact R32 refrigerant, and is able to complement solar PV systems for lower grid-electricity use.
Installation flexibility
With the heat pump unit split from the cylinder, you have the flexibility to place the heat pump unit outside away from noise sensitive areas and the cylinder outside or inside nearby, in a discrete area.
Adapts to your life
The built-in Wi-Fi module and SmartHQ™ app allows control of your heat pump water heater from anywhere. Change between five user modes, allowing you to adjust heating to lower cost periods, minimize energy use when you're away, or to prioritize solar energy on a sunny day if you have solar PV.
Energy savings of 64-68% are based on Haier Split System 28S, when compared to a standard resistive electric storage water heater in Zones 1 to 5 in 4S/4DS/2014.
Respect for the Planet
Haier's Monoblock is a one-piece water heater that uses heat pump technology and careful design to create an energy-efficient, high-performance water heater. The Split System uses considered technologies and materials to help reduce impact on the planet, including the ability to integrate with your solar PV system.
Reduced running costs
The heat pump technology results in a 69 to 79% (Monoblock) and 64 to 68%* (Split System) reduction in electricity used to heat the same volume of water compared to an electric resistance heater. This is likely to lower your electricity bill and save you money every year.
Low GWP refrigerant
Haier Monoblock Heat Pump Water Heaters use R290 which has a GWP of 3. Many heat pumps use R134A. R290 has a global warming potential that is 476 times lower than R134A. Split Heat Pump Water Heaters use R32 refrigerant, a next-generation refrigerant that efficiently carries heat and has a significantly lower environmental impact than its predecessors. The GWP (Global Warming Potential) of R32 is 675, nearly half as much as R134A, which is used by many heat pump water heaters.
Eco mode for lower electricity use
Eco mode optimizes the benefits of solar PV and lower cost, time-of-use electricity when you have a separate solar PV system. With Solar PV mode, your heat pump water heater integrates with your solar PV system to maximize consumption of PV solar-generated energy, which can help to reduce your power bill.
Solar PV ready
If you have a solar PV system, surplus solar energy it generates can be stored in the tank as hot water, reducing the use of grid-supplied energy. In Solar PV mode, the Heat Pump Water Heater receives a signal from the solar PV system, notifying it that generated energy is available to use. It uses the available solar PV energy to heat water at up to 75 degrees, storing it for later use.
*Energy savings of 69-79% are based on Haier Monoblock 2006, 2306, and 2306, when compared to a standard electric storage water heater in Zones 1 to 5 in AS/NZS4214-2008.
*Energy savings of 64-68% are based on Haier Split System 2006, when compared to a standard electric storage water heater in Zones 1 to 5 in AS/NZS4214.
Efficient Design
Haier Heat Pump Water Heaters have been designed to give you hot water reheating efficiency. The Split System has flexibility in installation location and the Monoblock has been designed to make installation as simple and familiar as possible.
Designed for efficiency
No more electric heating element to heat water – instead this system uses efficient heat pump technology. This technology, which transfers heat from the air to the water in the tank instead of heating via electricity alone, results in a reduction in electricity of 69 to 79% (Monoblock) and 64 to 68% (Split System) to heat the same volume of water compared to a traditional electric resistance water heater.
Fast reheating
Water reheats fast in the Split System with a heating capacity of 4.58kW, the largest in the heat pump water heater range, meaning that even if a large volume of water has been consumed, fresh water is rapidly heated to keep the hot water flowing.
Longevity
Using patented technology with a triple-layer protection creates a long-lasting, corrosion-resistant inner tank. The inner tank is tested to over 160,000 cycles to ensure durability over the expected lifetime.
Easy installation
Monoblock requires the same installation procedure as an electric storage water heater. If located in the same position, there's minimal need for additional valves or pipe layout changes, making it easy to swap from an electric resistance water heater. With the Split System heat pump split from the cylinder, you have the flexibility to place the heat pump unit outside away from noise-sensitive areas and the cylinder outside or inside in a discrete area.
Heat boost
The Split System has a backup booster of 2.6kW and built-in "one-time boost" further help with fast recovery when hot water use has been particularly high.
Quiet operation
With an operating noise level of 43–46dBA (Monoblock) and 52dBA (Split System) at a distance of one meter, Haier Heat Pump Water Heaters are quiet. The outdoor unit can be located away from noise-sensitive areas of the home, helping with a good night's sleep even while your heat pump works hard.
Haier believes in integrating smart technology into the heart of every home. The SmartHQ™ app puts control in your hands, allowing you to adjust heating as your hot water needs change – and do it from anywhere.
Change between five user modes using SmartHQ™ on your smartphone: Auto mode, Eco mode with Solar PV mode, Electric mode, Vacation mode and Boost.
Specifications
Monoblock
| Model | HP330M1U1 |
| Model | HP330M1U1 |
Split System
Heat Pump Water Heater
| Model | HP200M1U1P | HP250M1U1P | HP330M1U1 | HP300S2-F7 |
| Tank | ||||
| Total water capacity | 193L | 246L | 330L | 276L |
| Rated voltage/frequency | 220-240V/50Hz | 220-240V/50Hz | 220-240V/50Hz | 220-240V/50 Hz |
| PTR setting | 850kPa | 850kPa | 850kPa | 700kPa |
| Electrical connection | 15A 3-pin plug | 15A 3-pin plug | Hardwired | Hardwired |
| Ingress protection | IP24 | IP24 | IP24 | IP64 |
| Hot & cold inlet connections | 1/4" RP | 1/4" RP | 1/4" RP | 1/4" RP |
| PTR connection | 1/4" RP | 1/4" RP | 1/4" RP | 1/4" RP |
| COP @ 20°C / 15°C | 4.49 | 4.48 | 4.00 | 4.48 |
| Power input of electric element | 1.3 kW | 1.3 kW | 2.2 kW | 2.6 kW |
| Rated power input of heat pump | 0.43 kW | 0.43 kW | 0.7 kW | 1.19 kW |
| Pair coil tube and connection size - Liquid line | N/A | N/A | N/A | 1/4" (6.33mmU/(1/4 - 20UNF) |
| Pair coil tube and connection size - Suction line | N/A | N/A | N/A | 1/4" (6.52mmU/(1/4 - 18UNF) |
| Maximum power input of heat pump | 0.73 kW | 0.73 kW | 1.2 kW | 1.7 kW |
| Maximum power input of appliance | 2.25 kW | 2.25 kW | 3.4 kW | 4.3 kW |
| Average heating capacity by heat pump | 2.0 kW | 2.0 kW | 2.8 kW | 4.58 kW |
| Default temperature setting | 60°C | 60°C | 60°C | 55°C |
| Heating range (with element) | 35°C-75°C | 35°C-75°C | 35°C-75°C | 35°C-75°C |
| Heating range (heat pump only) | 35°C-65°C | 35°C-65°C | 35°C-65°C | 35°C-55°C |
| Refrigerant type/weight | R290/0.34kg | R290/0.34kg | R290/0.47kg | R32/0.93kg |
| Refrigerant pipe length | N/A | N/A | N/A | min. 1 m-max. 3 m |
| Noise | 43dB(A) | 43dB(A) | 47dB(A) | 52dB(A) |
| Ambient temperature range | -7-45°C | -7-45°C | -7-45°C | -15-45°C |
Performance COP C/15°C: Ambient air temperature, 15°C to 55°C water temperature. The COP was measured under test conditions with an ambient air temperature of 20°C / 15°C (Dry Bulb/Wet Bulb) and heating of the water from 15°C to 55°C during water heater operation. The noise level was measured at 1m from the water heater during a Noise Test conducted to Standard GB/T 31127 in a term resection chamber within a laboratory.
| Model | Air temp (°C) | Cold water temp (°C) | Recovery time (hours) | Recovery rate (L/hr) | Average heating capacity (kW) | Coefficient of Performance (COP) |
| HP200M1U1P | 19 | 13 | 3.6 | 35 | 2.1 | 4.5 |
| 9 | 8 | 8.2 | 24 | 1.6 | 3.5 | |
| 2 | 8 | 10.2 | 19 | 1.2 | 2.9 | |
| HP250M1U1P | 19 | 13 | 6.9 | 36 | 2.2 | 4.5 |
| 9 | 8 | 10.6 | 23 | 1.6 | 3.5 | |
| 2 | 8 | 12.3 | 20 | 1.2 | 2.9 | |
| HP330M1U1 | 19 | 13 | 5.82 | 57 | 2.8 | 4.0 |
| 9 | 8 | 9.6 | 34 | 2.5 | 3.9 | |
| 2 | 8 | 13.5 | 24 | 1.5 | 2.2 | |
| HP300S2-F7 | 19 | 13 | 2.5 | 110 | 3.1 | 4.3 |
| 7 | 8 | 4.15 | 67 | 3.6 | 3.6 | |
| 2 | 8 | 4.39 | 63 | 3.4 | 2.9 |
Performance results are measured as per AS/NZS 5125.1.2014.
HP300S2-F7 performance testing completed with a 3m distance between the heat pump unit and the cylinder.
Warranty and Support
Warranty
With a warranty of up to 7 years on the cylinder, you have peace of mind.
| Cylinder | Refrigeration Components* | Other Components* | ||
| Domestic Use | Parts | 7 years | 5 years | 5 years |
| Labour | 5 years | 5 years | 5 years | |
| Commercial Use | Parts | 1 year | 1 year | 1 year |
| Labour | 1 year | 1 year | 1 year |
*Refrigeration components refer to the entire heat pump unit including condenser, the compressor, expansion valves and associated pipework. It also refers to the microchannel, valves and pipework within the cylinder unit.
*Other components include all electrical components such as printed circuit boards, the user interface, electrical heating elements, sensors, along with all plumbing valves and electrical arcades.
Local Customer Care
With nation-wide Customer Care support and local warehousing of spare parts, if there is an issue with your water heater, Haier will help you get back up and running as quickly as possible.
Make more time for tennis with Haier
Haier
LEARN MORE ABOUT OUR PRODUCT HERE
