BISSA Shoe Cabinet
This document provides assembly instructions for the IKEA BISSA shoe cabinet with 2 compartments.
Safety Warnings
WARNING Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install anti-tip device provided. ⚠️
- NEVER put a TV on this product. ??
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves. ?????
- NEVER open more than one drawer at a time. ??
- Place heaviest items in the lowest drawers.
Read and follow each step of the instruction carefully.
Tools and Hardware
Required Tools: Screwdrivers (Phillips and flathead), hammer, spirit level, drill with Ø 8 mm (5/16") and Ø 3 mm (1/8") drill bits.
Hardware Included: Various screws, cam locks, dowels, plugs, and washers as detailed in the parts list.
Wall Mounting: The supplied screws and plugs can be used with most solid (A) and hollow (B) walls. For solid wood (C), use the screws without plugs. If unsure, seek professional advice.
For more information on secure wall mounting, visit: www.IKEA.com/secure-it or www.IKEA.cn/secure-it.
Parts List
| Part Number | Description (Visual) | Quantity |
|---|---|---|
| 118331 | Bolt/Screw | 10x |
| 118224 | Cam Lock | 10x |
| 101350 | Dowel/Peg | 10x |
| 107849 | Cap/Cover | 4x |
| 109535 | Screw | 12x |
| 10095065 | Bracket | 4x |
| 112792 | Screw | 16x |
| 10097027 | Hinge Part | 4x |
| 100347 | Screw | 4x |
| 109048 | Long Screw (for wall mounting) | 2x |
| 121714 | Wall Plug | 2x |
| 100823 | Washer | 2x |
Assembly Instructions
Step 1
Attach the two side panels to the base panel. Insert 10x screws (118331) into the pre-drilled holes on the side panels and screw them into the base panel.
Step 2
Attach 4x hinge parts (10097027) to the side panels using 4x screws (100347).
Step 3
Insert 4x dowels/pegs (101350) into the top holes of the side panels.
Step 4
Insert 2x dowels/pegs (101350) into the top holes of the side panels.
Step 5
Attach the top panel. Insert 3x cam locks (118224) into the top panel and turn them to secure the side panels.
Step 6
Place the top panel onto the assembled side panels.
Step 7
Secure the top panel. Insert 3x cam locks (118224) into the side panels and turn them to secure the top panel.
Step 8
Tilt the partially assembled unit. Attach the bottom shelf to the side panels.
Step 9
Insert 4x dowels/pegs (101350) into the bottom holes of the side panels.
Step 10
Attach the bottom panel. Insert 4x cam locks (118224) into the bottom panel and turn them to secure the side panels.
Step 11
Attach the doors. Mount 4x hinge parts (107849) onto the doors and then attach the doors to the main cabinet structure.
Step 12
Attach the drawer runners/mechanisms to the inside of the cabinet. Use 6x screws (112792) for each side.
Step 13
Diagram shows how to attach drawer front components. Do not force parts.
Step 14
Attach the drawer front to the drawer mechanism. Use 2x screws (109535) on each side.
Step 15
Diagram shows how to attach drawer front components. Ensure correct orientation.
Step 16
Attach the drawer front to the drawer mechanism. Use 2x screws (109535) on each side.
Step 17
Insert the assembled drawers into the cabinet. The diagram shows the drawer sliding into place.
Step 18
Diagram shows the drawer sliding into the cabinet.
Step 19
Diagram shows lifting the main cabinet body.
Step 20
Attach the back panel. Secure 4x brackets (10095065) using 4x screws (112792) to the cabinet frame, then slide the back panel into place.
Step 21
Secure the cabinet to the wall. Use 2x long screws (109048) and 2x washers (100823). If mounting to drywall or hollow walls, use 2x wall plugs (121714).
Step 22
Attach the drawer slides to the interior of the cabinet. Use 4x screws (109535) for each side.
Step 23
The assembly is complete. The diagram shows the shoe cabinet with its two doors open.
