KOMPLEMENT Shoe Organizer Assembly Instructions
This document provides step-by-step instructions for assembling the IKEA KOMPLEMENT shoe organizer.
Product Overview
The KOMPLEMENT shoe organizer is designed by IKEA to help you efficiently store your shoes within wardrobes or closets. This guide details the assembly process using provided components and hardware.
The initial page displays the product name "KOMPLEMENT" and an illustration of the fully assembled shoe rack filled with shoe-shaped forms on a grid. The IKEA logo and branding are also present.
Parts and Hardware
Before beginning assembly, please verify you have all the necessary parts and hardware. The following items are included:
| Part Number | Quantity | Description |
|---|---|---|
| 123459 | 1x | Left cabinet rail |
| 123458 | 1x | Right cabinet rail |
| 108817 | 24x | Washer |
| 111505 | 24x | Bolt |
| 100002 | 1x | Hex Key (L-shaped) |
| 109067 | 4x | Small Screw |
| 108172 | 2x | Mounting Bracket/Clip |
Additionally, the manual shows an illustration of a screwdriver ?, indicating it is required but not included.
Assembly Steps
Step 1: Attach Cabinet Rails
Mount the two cabinet rails (123459 and 123458) to the inside of your wardrobe side panel. Use four small screws (109067) for this step. A close-up diagram shows a screw being inserted and tightened with a screwdriver.
Parts used: 123459 (1x), 123458 (1x), 109067 (4x).
Step 2: Prepare Shoe Holders
Attach the upper part of the shoe holders (the curved shoe-shaped component) to their vertical stems. A close-up shows the stem being inserted into a connector on the holder. This process is repeated for all 24 shoe holders.
Parts used: Shoe holder component, stem (24x total).
Step 3: Assemble Shoe Rack Frame
Assemble the main grid structure of the shoe rack. This involves connecting the frame components using bolts (111505) and washers (108817). The L-shaped hex key (100002) is used to tighten these bolts. This step is shown to be repeated 24 times for the bolts and washers.
Parts used: 108817 (24x), 111505 (24x), 100002 (1x).
Step 4: Install Shoe Organizer
Slide the assembled shoe organizer onto the cabinet rails. Secure the organizer using two mounting brackets/clips (108172) and screws. Close-up diagrams illustrate how the brackets attach to the cabinet and the organizer's runners.
Parts used: 108172 (2x).
Final Adjustments and Usage
The final diagrams show how to adjust the position of the shoe holders on their stems. Arrows indicate that the shoe holders can be slid left and right along the stem. The mechanism for securing the stems to the rack is also shown, with the hex key being used to tighten a bolt.
The document includes an information icon ⓘ.
