Paulmann MaxLED 706.19 LED Strip Controller

Components and Accessories

This section details the various components included or compatible with the 706.19 controller.

LED Strips and Connectors

Various LED strips and connectors are shown. Please refer to the article numbers for specific models:

• LED Strips/Connectors: Art.No.705.77/78/79/80/85/86/88/89/706.04/05/65/66/67/68/69/70/71/72
• LED Strips/Connectors: Art.No. 705.68/69/71/72/81/82/83/84/ 706.59/60/61/62/63/64/75/76
• Connectors: Art.No.706.16, Art.No.706.18
• LED Strips: Art.No. 705.68/69/71/72/81/82/83/84
• Connectors: Art.No.706.17, Art.No.705.74/75/76

Compatible LED Types: MaxLED 500, MaxLED 1000. MaxLED RGB ❌ (Note: RGB functionality may not be supported by this specific controller model, indicated by the cross symbol).

Power Supply and Driver

The system requires a driver with the following specifications:

• Input: 230V~
• Output: DC24V

The remote control requires 2x AAA batteries (1.5V), which are not included. ??

Operation and Setup

Remote Control

A 2.4G RF remote control is used for operation. The maximum wireless range is approximately 30 meters (max.30m).

Code Matching (Pairing)

Follow these steps to pair the remote control with the LED strips:

1. Step a: Connect the power supply and driver to the LED strip.
2. Step b: Ensure the LED strip is powered on.
3. Step c: Press and hold the power button on the remote control for less than 3 seconds (<3 seconds). The LED strip should flash to confirm pairing. (Visual shows remote, hand, and LED strip connection).

(Diagram shows a sequence of connections and a checkmark ✔️ indicating successful pairing).

Code Clearing (Unpairing)

Follow these steps to unpair the remote control from the LED strips:

1. Step a: Connect the power supply and driver to the LED strip.
2. Step b: Ensure the LED strip is powered on.
3. Step c: Press and hold the power button on the remote control for less than 3 seconds (<3 seconds). Repeat this action 5 times (5x). The LED strip should flash to confirm unpairing. (Visual shows remote, hand, and LED strip connection).

(Diagram shows a sequence of connections, repeated actions, and a checkmark ✔️ indicating successful unpairing).

Certifications and Declarations

EU Approval

Approved for operation in all European countries. CE: Conformity with EU directives 2014/30/EU and 2014/53/EU.

Further information available at: www.paulmann.com/de/de/b2b-haendler-log-in.html

Radio Frequency Information

• Frequency Band: 2.4 GHz - 2.4835 GHz
• Radiated Energy: 10mW

Note: This device does not apply for the geographical area within a radius of 20km from the centre on "Ny Alesund".

EU Declaration of Conformity

Paulmann Licht declares that the radio equipment type Art.-Nr. 706.19 complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: www.paulmann.com/ce

Disposal Information (WEEE)

Important: Electrical and electronic equipment (WEEE) must not be disposed of in household waste. They can be handed in at public collection points of waste disposal companies. Old batteries and accumulators, as well as lamps that can be removed from the old device without destruction, must be separated from the old device before handover to a collection point. Retailers are obliged to take back this product free of charge within the scope of § 17 paragraphs 1 and 2 of the ElektroG. End-users of old devices must be responsible for deleting personal data on the old devices to be disposed of.

For more information, visit: www.paulmann.com