Paulmann LED Lunar Series Safety Instructions and Installation Guide
Brand: Paulmann
Article Numbers: 706.41, 706.42, 706.43, 706.44, 706.45, 706.46, 706.47, 706.48, 706.49, 706.50, 706.51, 706.52, 706.53, 706.54, 706.55, 706.56
Certifications: CE, UKCA
Energy Efficiency: Labels indicate classes from A++ to A.
General Safety Instructions
Please follow these safety instructions carefully. Numbers in parentheses refer to specific steps or components.
Refer to www.paulmann.com/symbols for symbol explanations.
Disposal Information:
Old electrical appliances must not be disposed of with household waste. They can be handed in at public collection points for disposal. Old batteries and accumulators, as well as lamps that can be removed from the old appliance without damage, must be separated from the old appliance before submission to a collection point. Retailers are obligated to take back this product free of charge within the scope of §§ 17 (1) and (2) of the German Electrical and Electronic Equipment Act (ElektroG). End-users of old appliances are responsible for deleting personal data on the appliances to be disposed of.
Installation Guide
Follow the numbered steps for installation:
-
Step A: Mounting to Ceiling
Attach the mounting bracket to the ceiling using appropriate fixings.
-
Step B: Wire Connection
Connect the electrical wires.
-
Step C: Electrical Connection (230V~)
Connect the 230V~ power supply. Ensure the power is switched OFF ❌ before connecting. [Checkmark] ✔️ indicates correct wiring. The connection shows Live (L), Neutral (N), and Ground (PE) terminals.
-
Step D: Attaching Fixture Body
Secure the main fixture body to the mounting bracket.
-
Step E: Inserting Components
Insert the light source or operating device into the fixture. Ensure power is OFF ❌.
-
Step F: Attaching Diffuser/Cover
Attach the diffuser or cover by pushing it onto the fixture.
-
Step G: Securing Diffuser/Cover
Secure the diffuser or cover. Ensure power is OFF ❌.
-
Step H: Final Assembly and Illumination
The fixture is now assembled and illuminated.
Component Replaceability
The following describes the replaceability of the light source and operating device:
- (1) Light source or (4) operating device: Can be replaced by end users without permanent damage to the luminaire.
- (2) Light source or (5) operating device: Can be replaced by a qualified electrician without permanent damage to the luminaire.
- (3) Light source or (6) operating device: Not replaceable; the luminaire must be replaced.
This information is provided in multiple languages in the original document.
Product Information
Energy Efficiency Class: This product contains a light source with an energy efficiency class as indicated on the product label (e.g., A++ to A).
