ÄSPERÖD Side Table Assembly Instructions
Brand: IKEA
Safety Warnings
WARNING: This is a delicate table. Do not sit on the product.
WARNING: Do not place heavy objects on this product. Maximum load: 10 kg (22 lb).
Parts Included
- 20x Screws (Part 10059785)
- 4x Protective pads/feet (Part 107091, 194765)
Note: Quantities shown in assembly steps may differ from the initial parts list. Follow step-specific quantities.
Assembly Steps
Step 1
Attach the first set of legs to the main circular frame (tabletop support). Ensure correct alignment (✔️) and avoid incorrect attachment (❌).
Use 6x Screws (10059785).
Step 2
Attach the remaining legs to the main circular frame. Ensure correct alignment (✔️) and avoid incorrect attachment (❌).
Use 6x Screws (10059785).
Step 3
Attach the supports for the lower shelf to the legs using a screwdriver ?.
Use 12x Screws (10059785).
Step 4
Attach the protective feet/levelers to the bottom of each leg. These may clip into place.
Use 4x Protective pads/feet.
Step 5
Secure the lower shelf to the supports attached in Step 3.
Use 8x Screws (10059785).
Step 6
Secure the main tabletop frame to the top of the legs.
Use 8x Screws (10059785).
Step 7
Place 8x protective pads (Part 107091, 194765) onto the designated points on the tabletop frame where the top glass shelf will rest.
Step 8
Carefully place the top glass shelf onto the protective pads. Handle with care ⚠️; do not drop or apply excessive force.
Step 9
Carefully place the lower glass shelf onto its supports. Handle with care ⚠️; do not drop or apply excessive force.
Step 10
Use the adjustable feet at the base of each leg to level the table on uneven surfaces. Rotate the feet ? to adjust height ↑↓.
