ÄNGESBYN Storage Table
Product of IKEA
Safety Warnings
WARNING: Delicate table - Do not sit on the product.
WARNING: Delicate table - Do not place heavy objects on this product. Maximum load 10 kg (22 lb).
Assembly Overview
Before starting assembly, ensure you have the necessary tools and parts. The following are recommended:
- Screwdriver (required)
- Do not use sharp objects that could damage the product.
- Check parts and instructions carefully.
- Follow the steps in order.
Parts Included:
8x Screws (153280)
4x Connecting pieces (153289)
Assembly Steps
Step 1
Attach 4x connecting pieces (153289) to the designated points on the frame components. The diagram shows how the pieces slot into place.
Step 2
Assemble the main frame structure. Use 8x screws (153280) to connect the frame parts. The diagram shows the screws being inserted and tightened.
Diagram Description: The main cylindrical frame is shown being assembled with screws. A close-up shows screws being inserted into pre-drilled holes.
Step 3
Insert the fabric liner into the assembled frame. The diagram shows the liner being placed from the top downwards into the wire structure.
Diagram Description: The fabric liner, with tie straps visible, is being lowered into the wire frame.
Step 4
Secure the fabric liner by tying the straps. The diagram shows hands tying the fabric straps to the frame.
Diagram Description: Close-up of hands tying the fabric straps to the frame to secure the liner.
Step 5
Attach the top surface. The diagram shows the top piece being placed onto the frame, aligning with the connecting pieces.
Diagram Description: The circular top surface is shown being placed onto the top of the assembled frame, connecting to the previously attached pieces.
Step 6
Final placement of the top surface. The diagram indicates the top is now fully seated and secured.
Diagram Description: The completed storage table with the top surface in place.
