VITTSJÖ

⚠️ Important Safety Information

WARNING: Delicate table - Do not sit on the product.

WARNING: Delicate table - Do not place heavy objects on this product. Maximum load capacity: 10 kg (22 lb).

Parts List

Step 1

Attach the two vertical leg frames to the base frame. The close-up shows how to connect the parts, ensuring they are properly seated. This step requires 2 connection points per leg.

Visual description: Two upright leg frames are being attached to a rectangular base frame. A magnified view shows a finger pushing a connector into place.

Step 2

Secure the vertical leg frames to the base frame using screws (item codes 117689, 130610) and the provided Allen key (item code 10037615). Two screws are used for each leg connection.

Visual description: Screws are being inserted and tightened with an Allen key to connect the vertical leg frames to the base.

Step 3

Attach the lower horizontal crossbars. These connect the vertical leg frames at the bottom. Ensure they are fully inserted into their respective slots.

Visual description: Two horizontal bars are being attached between the lower parts of the vertical leg frames.

Step 4

Secure the lower horizontal crossbars using screws (item code 10037615) and the Allen key. A total of 4 screws are used to fasten these crossbars.

Visual description: Screws are being inserted and tightened with an Allen key to secure the lower crossbars to the vertical leg frames.

Step 5

Screw the adjustable feet (item codes 122158, 143131) into the bottom of each vertical leg. These can be adjusted later to level the table.

Visual description: Adjustable feet are being screwed into the base of the leg frames. A close-up shows a hand turning a foot.

Step 6

Attach the upper horizontal supports to the top of the vertical leg frames. Use 6 small screws (item code 107091) to secure these supports.

Visual description: Horizontal bars are being attached to the top of the vertical leg frames. A close-up shows small screws being inserted.

Step 7

Carefully place the glass top onto the assembled frame. Ensure it is positioned correctly and sits securely.

Visual description: A person is carefully placing a glass top onto the assembled table frame.

Step 8

Begin assembly of the second, taller unit. Attach the brackets (item codes 10130559, 10130564) to the vertical supports. Use screws (item codes 117689, 130610) and the Allen key (item code 10037615). Two brackets and four screws are used per side of the vertical supports.

Visual description: Brackets are being attached to the vertical posts of the second unit using screws and an Allen key.

Step 9

Continue attaching brackets to the vertical supports. Use screws (item codes 117689, 130610) and the Allen key (item code 10037615). Two screws are used for each bracket.

Visual description: More brackets are being attached to the vertical posts of the second unit.

Step 10

Attach additional brackets to the vertical supports. Use the Allen key (item code 10037615) and screws. A total of 8 screws are used in this step.

Visual description: More brackets are being attached to the vertical posts of the second unit.

Step 11

Attach the base frame to the bottom of the vertical supports for the second unit. Ensure proper alignment before proceeding.

Visual description: The base frame of the second unit is being attached to the vertical leg assembly.

Step 12

Secure the base frame to the vertical supports using screws (item codes 117689, 130610) and the Allen key (item code 10037615). A total of 8 screws are used for this connection.

Visual description: Screws are being inserted and tightened with an Allen key to secure the base frame to the vertical supports.

Step 13

Attach the upper crossbars to the top of the vertical supports for the second unit. Ensure they are properly aligned and secured.

Visual description: Horizontal bars are being attached to the top of the vertical leg frames of the second unit.

Step 14

Secure the upper crossbars using screws (item codes 117689, 130610) and the Allen key (item code 10037615). A total of 8 screws are used to fasten these crossbars.

Visual description: Screws are being inserted and tightened with an Allen key to secure the upper crossbars to the vertical leg frames.

Step 15

Screw the adjustable feet (item codes 122158, 143131) into the bottom of each vertical leg of the second unit. These can be adjusted later to level the table.

Visual description: Adjustable feet are being screwed into the base of the leg frames for the second unit.

Step 16

Attach the back panel to the assembled frame. Use 10 small screws (item codes 123723, 124694) and a screwdriver to secure it.

Visual description: A back panel is being attached to the rear of the assembled frame using screws.

Step 17

Attach the top frame supports to the top of the vertical leg frames for the second unit. Ensure they are properly aligned and secured.

Visual description: Horizontal bars are being attached to the top of the vertical leg frames of the second unit.

Step 18

Carefully place the glass top onto the assembled frame of the second unit. Ensure it is positioned correctly and sits securely.

Visual description: A person is carefully placing a glass top onto the assembled second table frame.

Care and Maintenance

Check regularly that all assembly fastenings are properly tightened and retighten when necessary.

To clean, wipe with a damp cloth. Wipe dry with a clean cloth.

For glass parts: Wipe with a damp cloth in water and mild detergent. Wipe dry with a clean cloth.