Children's House Bed Assembly Instructions
Model Numbers: WF288651AAA, WF288652AAA
Dimensions: 200x90cm
This set is included in 2 boxes. If you do not receive the full 2 boxes, please contact customer service.
Estimated assembly time: 120 minutes ⏱️
Important Safety and Assembly Notes
Important! Keep for future reference: Read carefully.
- To be assembled by an adult. Assembly must be checked by an adult before use.
- WARNING! Keep all screws, small parts, and plastic bags out of the reach of children.
- Properly identify all parts before assembling.
- Never use the item if any of its parts are broken or missing.
- Should any problems arise, please contact the After Sales Service.
- Always follow the manufacturer's instructions.
- Care: Clean with a soft, dry cloth. In case of larger stains, carefully rub with a slightly damp, non-abrasive sponge.
- Do not jump on the bed.
Parts List (Stückliste)
The following wooden components are included:
| Part ID | Description | Quantity |
|---|---|---|
| 01 | Post/Leg | 2 |
| 02 | Post/Leg | 2 |
| 03 | Side Rail | 1 |
| 04 | Side Rail | 1 |
| 05 | Side Rail | 1 |
| 06 | Side Rail | 1 |
| 07 | Slats Support Rail | 4 |
| 08 | Slats Support Rail | 4 |
| 09 | Bed Frame Side | 2 |
| 10 | Bed Frame Side | 1 |
| 11 | Bed Frame Side | 1 |
| 12 | Roof Beam | 4 |
| 13 | Roof Support | 4 |
| 14 | Roof Support | 1 |
| 15 | Small Shelf/Support | 2 |
| 16 | Vertical Support | 2 |
| 17 | Horizontal Support | 1 |
| 18 | Central Shelf/Tabletop | 1 |
| 19 | Slats (19x15mm) | 30 |
Note: Part IDs are referenced in assembly steps.
Hardware List (Hardware-Liste)
The following fasteners and hardware are included:
| ID | Description | Quantity |
|---|---|---|
| A | Screw (M6x90mm) | 24 |
| B | Dowel/Cam Lock Connector | 24 |
| C | Screw (Φ8x30mm) | 48 |
| D | Screw (Φ6x90mm) | 26 |
| E | Screw (Φ6x60mm) | 4 |
| F | Screw (M6x30mm) | 8 |
| G | Dowel/Cam Lock Connector | 2 |
| H | Screw (Φ7x50mm) | 10 |
| J | Screw (Φ3x30mm) | 60 |
| K | (Unspecified hardware) | 2 |
Note: Hardware IDs are referenced in assembly steps.
Assembly Steps
Step 1: Prepare Frame Sides
Attach parts 07 (x4), 08 (x4), 09 (x2), 10 (x1), 11 (x1), 12 (x4), and 15 (x2) using hardware C (Φ8x30mm) and potentially dowels/connectors B. This step involves connecting various horizontal and vertical pieces that form the base structure and roof supports.
Diagram shows multiple pieces being joined with hardware C.
Step 2: Attach Vertical Posts to Base Rails
Connect vertical posts (02) to base rails (04, 05, 07, 08) using hardware A (M6x90mm) and B. This forms the initial upright structure for one side of the bed.
Diagram shows two vertical posts (02) being attached to horizontal pieces (04, 05, 07, 08) with screws A and connectors B. A small inset shows a checkmark ✔️ indicating correct assembly.
Step 3: Attach Vertical Posts to Base Rails (Second Side)
Connect vertical posts (01, 06) to base rails (03, 07, 08) using hardware A (M6x90mm) and B. This forms the upright structure for the other side of the bed.
Diagram shows two vertical posts (01, 06) being attached to horizontal pieces (03, 07, 08) with screws A and connectors B. A small inset shows a checkmark ✔️ indicating correct assembly.
Step 4: Connect Bed Frame Sides
Join the assembled sides from Step 2 and Step 3. Connect bed frame sides (09, 10) to the vertical posts (01, 03, 02, 04) using hardware A (M6x90mm) and B. Also attach roof beams (12) to the posts.
Diagram shows the two halves of the bed frame being joined together with parts 09 and 10, using hardware A and B. Roof beams (12) are also shown being attached to the posts.
Step 5: Connect Bed Frame Sides (Second Side)
Continue connecting the bed frame sides (09, 10) to the vertical posts (01, 06, 02, 05) using hardware A (M6x90mm) and B. Attach roof beams (12) to the posts.
Diagram shows the second side of the bed frame being assembled, connecting parts 09 and 10 to posts (01, 06, 02, 05) with hardware A and B. Roof beams (12) are attached.
Step 6: Assemble Roof Supports
Assemble the roof support structures using parts 13 (x2) and hardware F (M6x30mm) and G. This involves connecting two long roof support pieces (13) with smaller connectors/dowels (G) and screws (F).
Diagram shows two long pieces (13) being joined at an angle using hardware F and G. An inset shows a close-up of the connection.
Step 7: Attach Roof Structure
Attach the assembled roof supports (from Step 6) and additional roof supports (13, 14) to the main bed frame using hardware C (Φ8x30mm), D (Φ6x90mm), and E (Φ6x60mm). This forms the iconic house roof shape.
Diagram shows the roof structure being attached to the main bed frame. Multiple roof supports (13) and connecting pieces (14) are secured with hardware C, D, and E. Insets show close-ups of connections.
Step 8: Attach Vertical Supports
Attach vertical supports (16) to the bed frame using hardware H (Φ7x50mm). These supports are likely for the central shelf/table.
Diagram shows two vertical pieces (16) being attached to the bed frame using screws H.
Step 9: Install Horizontal Supports and Shelf Brackets
Install horizontal support (17) between the vertical supports (16) using hardware D (Φ6x90mm). Attach shelf brackets/supports (15) to the main frame using hardware F (M6x30mm).
Diagram shows part 17 being connected between parts 16 with hardware D. Parts 15 are attached to the main frame with hardware F. Insets show close-ups.
Step 10: Install Central Shelf/Tabletop
Place the central shelf/tabletop (18) onto the installed supports (16, 17) and secure it using hardware H (Φ7x50mm).
Diagram shows the shelf/tabletop (18) being placed and secured with screws H. An inset shows a close-up of the connection.
Step 11: Install Bed Slats
Lay the bed slats (19) across the bed frame sides (09, 10, 11) and secure them using hardware J (Φ3x30mm). The slats are pre-sized (19x15cm).
Diagram shows the slats (19) being placed and screwed into the bed frame using hardware J.
