Assembly Instruction

Part List:

• A: Post (2 PCS)
• B: Post (2 PCS)
• C: Post (2 PCS)
• D: Post (2 PCS)
• E: Side Rail (2 PCS)
• F: End Guard Rail (4PCS)
• G: Guard Rail (2PCS)
• H: Side Rail (2PCS)
• J: Side Rail (2PCS)
• K: Post Connector (4PCS)
• M: End Rail (2PCS)
• N: Caster (2PCS)
• N1: Locking Caster (2PCS)
• O: Slat (64PCS)
• Q: Spacer (61PCS)
• Y: Plug (128PCS)
• Z: Ladder (2PCS)

Diagram Description: The parts list includes various components for the bunk bed and trundle, such as posts, rails, slats, connectors, casters, and plugs, each with a specified quantity.

Hardware List - Bunk Bed (T1910-01BK/SR)

• 1: Bolt 1/4*19mm (X 28pcs)
• 2: Bolt 5/16*19mm (X 16pcs)
• 3: Bolt 1/4*60mm (X 6pcs)
• 4: Bolt 1/4*51mm (X 8pcs)
• 5: Nut 1/4 (X 8pcs)
• 6: L-Allen Key (X 1pc)
• 7: Wrench (X 1pc)

Hardware List - Trundle (T1910-02BK/SR)

• 1: Bolt 1/4*33mm (X 4pcs)
• 2: Bolt 1/4*16mm (X 8pcs)
• 3: Nut 1/4 (X 4pcs)
• 4: L-Allen Key (X 1pc)
• 5: Wrench (X 1pc)

STEP 1

Assemble the Bunk Bed using Hardware Pack: T1910-01BK/SR.

Attach part F (End Guard Rail) to part B (Post) using Hardware 1 (8 pcs).

Diagram Description: Shows two sets of part F connecting to two parts B, forming the initial frame structure for the bunk bed sides.

STEP 2

Attach part F (End Guard Rail) to part C (Post) and part D (Post) using Hardware 1 (8 pcs).

Diagram Description: Shows two sets of part F connecting to two parts C and two parts D, forming the other side frame structure for the bunk bed.

STEP 3

Connect the assembled side frames. Attach part H (Side Rail) and part J (Side Rail) to the posts (A, C for one side; B, D for the other) using Hardware 2 (16 pcs).

Diagram Description: Illustrates connecting the side rails (H, J) to the posts (A, C, B, D) to form the upper and lower bed frames.

STEP 4

Insert slats (O) into the upper and lower bed frames. Secure slats using part Y (Plug).

Diagram Description: Shows slats (O) being placed across the bed frames and secured with plugs (Y).

STEP 5

Continue inserting and securing slats (O) with plugs (Y) for both the upper and lower beds.

Diagram Description: Further illustration of placing and securing slats (O) with plugs (Y) across the bed frames.

STEP 6

Attach the upper bed frame to the lower bed frame. Connect posts (A/B) of the upper bed to the corresponding posts (C/D) of the lower bed using hardware.

Diagram Description: Shows the upper bunk bed structure being attached to the lower bunk bed structure, likely connecting the main vertical posts.

STEP 7

Continue attaching the upper bed to the lower bed.

Diagram Description: Further illustration of connecting the upper bed structure to the lower bed structure.

STEP 8

Attach guard rails (G) to the side rails (H) of the upper bed using Hardware 1 (4 pcs) and Hardware 3 (6 pcs).

Diagram Description: Shows guard rails (G) being attached to the side rails (H) of the upper bunk bed.

STEP 9

Attach post connectors (K) to the lower bed frame posts (C, D) using Hardware 1 (4 pcs).

Diagram Description: Shows post connectors (K) being attached to the lower bed's corner posts.

STEP 10

Attach the upper bed structure to the lower bed structure using post connectors (K) and Hardware 1 (4 pcs).

Diagram Description: Shows the upper bunk bed being secured to the lower bunk bed using post connectors (K).

STEP 11

Attach ladder (Z) to the bunk bed using parts F (End Guard Rail) and Hardware 4 (8 pcs) and Hardware 5 (8 pcs).

Diagram Description: Shows the ladder (Z) being attached to the side of the bunk bed, likely secured to the guard rails (F).

STEP 12

Assemble the Trundle using Hardware Pack: T1910-02BK/SR.

Attach part E (Side Rail) to part N1 (Locking Caster) using Hardware 1 (2 pcs) and Hardware 3 (2 pcs).

Note: The Lever "OFF" should be oriented on the same side of slat slots.

Diagram Description: Shows a trundle side rail (E) being attached to a locking caster (N1) with bolts and nuts. The orientation of the caster lever is specified.

STEP 13

Attach part E (Side Rail) to part N (Caster) using Hardware 1 (2 pcs) and Hardware 3 (2 pcs).

Diagram Description: Shows a trundle side rail (E) being attached to a regular caster (N) with bolts and nuts.

STEP 14

Attach part M (End Rail) to part E (Side Rail) using Hardware 2 (8 pcs).

Diagram Description: Shows the end rails (M) being attached to the side rails (E) of the trundle frame.

STEP 15

Insert slats (O) into the trundle frame. Secure slats using part Y (Plug).

Diagram Description: Shows slats (O) being placed across the trundle frame and secured with plugs (Y).

STEP 16

Final placement and securing of slats (O) with plugs (Y) for the trundle.

Diagram Description: Final illustration of slats (O) and plugs (Y) being fitted into the trundle.

STEP 17

How to lock caster! The diagram shows a caster with a lever. Pushing the lever down locks the caster.

How to unlock caster! The diagram shows the caster lever. Pulling the lever up unlocks the caster.

Diagram Description: Visual guide demonstrating the operation of the locking casters, showing the lever's position for locked and unlocked states.

Final Assembly

Diagram Description: Shows the completed triple bunk bed with the trundle unit positioned underneath, ready for use.