PLATFORM BED

ORIGINAL INSTRUCTION MANUAL

DEAR CUSTOMER,

Thank you for choosing our product. Please read this manual carefully before assembling or using the product, to avoid damage caused by improper use. If the product is passed on to third parties, this manual has to be passed on along with the product. If you have any questions, please don't hesitate to contact us.

PARTS LIST

Diagram of the assembled platform bed: A queen-size bed frame with a tufted headboard and four legs.

A: Headboard (1x) - Features a diamond-tufted pattern.
B: Side Rail (1x)
C: Side Rail (2x)
D2: Support Beam (4x)
G2: Slats (2x) - A set of wooden slats for mattress support.
H2: Support Beam (1x)
I2: Center Support Rail (1x)
J2: Center Support Rail (1x)
K2: Support Beam (1x)
L: Legs (2x)
M: Bracket (2x)
N: Connector (2x)
O: Bracket (2x)
Q1: Screw M8x18MM (30x)
Q2: Screw M8x35MM (6x)
Q3: Screw M8x45MM (5x)
Q4: Spanner (1x)
R1: Bracket (1x)
R2: Bracket (1x)

ASSEMBLY

Before your installation, please make sure that you have all the parts listed on the manual. If you find something missing, please stop assembling and contact your supplier immediately.

Step 1: Adjust Headboard Height

You can adjust the height of the headboard by adjusting the screw position. The three positions are:

Lower: Achieved by positioning screws (Q3) in the lowest holes on the headboard frame (A) and side rails (C).
Normal: Achieved by positioning screws (Q3) in the middle holes on the headboard frame (A) and side rails (C).
Higher: Achieved by positioning screws (Q3) in the highest holes on the headboard frame (A) and side rails (C).

Diagram Description: Illustrates the three height adjustment options for the headboard using screws (Q3) connecting part A to part C.

Step 2

Attach side rails (C) to the headboard frame (A) using screws (Q1). Secure support beam (H2) to the side rails (C) using screws (Q1).

Diagram Description: Shows side rails (C) being attached to the headboard frame (A) with screws (Q1). Support beam (H2) is also attached to the side rails with screws (Q1).

Step 3

Attach support beams (D2) to the side rails. Secure brackets (M) and (R1) to the support beams (D2) and side rails using screws (Q1) and (D2).

Diagram Description: Illustrates attaching support beams (D2) to the side rails and securing brackets (M) and (R1) using screws (Q1) and (D2).

Step 4

Attach connectors (N) to the support beams (D2). Secure brackets (O) to the connectors (N) using screws (Q1).

Diagram Description: Shows connectors (N) being attached to support beams (D2) and then securing brackets (O) with screws (Q1).

Step 5

Attach the main frame pieces (A) to the headboard structure using screws (D2).

Diagram Description: Depicts the main frame pieces (A) being connected to the headboard assembly with screws (D2).

Step 6

Attach the side rails (B) to the frame using screws (Q1).

Diagram Description: Shows side rails (B) being attached to the main bed frame using screws (Q1).

Step 7

Install support beams (L) and (K2) using screws (Q2). Attach center support rail (J2) using screws (Q2).

Diagram Description: Illustrates the installation of support beams (L, K2) and center support rail (J2) using screws (Q2).

Step 8

Attach center support rails (I2) using screws (Q1).

Diagram Description: Shows center support rails (I2) being attached with screws (Q1).

Step 9

Complete the frame assembly by attaching remaining support structures using screws (Q2).

Diagram Description: Depicts the final stages of assembling the bed frame, securing various components with screws (Q2).

Step 10

Place the slats (G2) onto the support structure. Secure the slats using screws (Q3) or (Q2) as indicated.

Diagram Description: Shows the wooden slats (G2) being laid across the bed frame and secured with screws.

	Upholstered Storage Bed with LED Lights & Wingback Assembly Instructions Step-by-step assembly guide for the Upholstered Storage Bed with LED Lights and Wingback Headboard. Includes a detailed parts list and instructions for building your new bed frame.
	Assembly Instructions: 1910-02 Twin Triple Bunk Bed with Trundle Detailed assembly guide for the 1910-02 Twin Triple Bunk Bed with Trundle, including parts list, hardware, and step-by-step instructions for both the bunk bed and the trundle unit.
	Children's House Bed Assembly Instructions - WF288651AAA / WF288652AAA Step-by-step assembly guide for the WF288651AAA and WF288652AAA children's house bed (200x90cm). Includes detailed parts list, hardware list, and visual instructions for building a safe and sturdy kids' bed.
	TFHCKBW2DR Farmhouse King Size Bed Frame Assembly Instructions Comprehensive assembly guide for the TFHCKBW2DR Farmhouse King Size Bed Frame. This document includes a detailed parts list, hardware list, and step-by-step instructions for proper setup.
	Assembly Instructions for WF305798-WF305799 Murphy Bed Comprehensive assembly instructions for the WF305798-WF305799 Murphy Bed, detailing part identification, hardware requirements, and a step-by-step guide for construction.
	Assembly Instructions: Your Guide to Building a Bed Frame This comprehensive guide provides detailed, step-by-step assembly instructions for a bed frame. It includes a complete hardware list, important safety precautions, and warranty information to ensure a successful build.
	MILAN Bed Frame Assembly Instructions Comprehensive assembly instructions for the MILAN bed frame, detailing parts, tools, and step-by-step guidance for a smooth setup.
	Sofa Bed Assembly Instructions: Step-by-Step Guide Comprehensive assembly instructions for a sofa bed, including a detailed parts list, step-by-step building guide, pre-assembly tips, and safety precautions. Features clear text descriptions of all visual elements.