AGPTEK W06 Smart Watch User Manual

⭐ Before Use

Thank you for purchasing this product. Please read this user manual carefully before use and keep this instruction for future reference. If you have any problem about this product, please feel free to contact us at support@agptek.com.

⭐ Warning

Please consult your doctor before starting a new exercise program. Although the smart watch can monitor the real-time dynamic heart rate, it cannot be used for any medical purpose.

⭐ Cautions

1. With the functions of water resistant, sweat proof, rain-proof, it can be used directly in daily washing, shower (cold water) and other daily environments.
2. Do not use in bath, sauna, hot spring or other hot environments with hot water and steam, which will lead to product failure.
3. Owing to the action of water pressure, do not wear it while swimming or diving.

⭐ Note

1. The data of blood pressure measurement are for reference only. It cannot be used as a basis for medical related aspects.
2. The language of App is synchronized by Settings on your mobile phone.
3. The monitored information of watch will be synchronized to the watch. Only wear the watch, you can get these information.
4. The functions available in the watch are included: multiple dial selection, Pedometer, Calories, Heart rate monitor, Blood Pressure monitor, Multi - sport Mode, Smart reminder (Call/SMS/Sedentary and other reminder.), Stopwatch, Brightness adjustment, Find Phone, Power On/Off.
5. These functions of App, such as Continuous HR monitoring, Call Remind, SMS Remind, Alarm Clock and more, are off by default. If needed, you can turn on the relative function on Device Management of AGPTEK App.

⭐ More Assistance

There are some videos about W06 Smart Watch. If you are needed, please visit:

1. Demo functions of w06 Smart Watch: https://www.agptek.com/index.php/demo-functions-of-smart-watch-sw06b-or-sw06cg/
2. How to bind W06 Smart Watch to App: https://www.agptek.com/index.php/how-to-bind-smart-watch-sw06b-or-sw06cg-to-app/
3. How to operate the App of W06 Smart Watch: https://www.agptek.com/index.php/how-to-operate-the-app-of-smart-watch-sw06b-or-sw06cg/
4. How to replace the wristband of W06 Smart Watch: https://www.agptek.com/index.php/how-to-replace-the-wristband-of-smart-watch-sw06b-or-sw06cg/
5. How to download App of W06 Smart Watch: https://www.agptek.com/index.php/videos-for-w06-smart-watch/

⭐ Product Overview

The AGPTEK W06 Smart Watch features a modern design with a square display and a mesh band. The front view shows the watch face with hour markers. The back view reveals the AGPTEK branding, model information, and the heart rate sensor and charging contacts.

Buttons & Controls

• 1. Multi-Function Button (MFB)
• 2. Heart Rate Sensor
• 3. Charging Contact

Basic Operations

1. Turn On: When in Power off, hold the Multi-Function Button (MFB) for 5 seconds to turn on the watch.
2. Turn Off: When in Power on, find the On/Off shutdown interface, hold the MFB for 5 seconds and select "yes" to turn off.

Note: When the LED indicator is flashing, it means the watch is monitoring heart rate and blood pressure. Do not directly look at the blinking sensor light when detecting, as it may cause eye irritation.

⭐ How to Wear

Wear the watch at 1-2 finger width from the wrist joint. The sensor of the smart watch should be close to the skin. For accurate heart rate monitoring results, it is not recommended to wear it too tightly or loosely, as this may affect blood circulation.

⭐ Charging

Charge the watch under the following circumstances: for the first time use, or when the battery is low and the watch powers off automatically.

1. Attach the equipped magnetic charger to the metal contact on the back of the watch, and insert the other end of the charger into a USB wall charger or a USB interface of a computer.
2. The screen will display the charging state.

Note: Do not directly look at the blinking sensor light when charging, as it may cause eye irritation.

⭐ App Download & Supported System

You can download and install the "AGPTEK" app by scanning the QR codes provided or by searching "AGPTEK" in the "App Store" on iPhones or in "Google Play" on Android phones. After successfully connecting your phone through the AGPTEK App, the watch will automatically sync data and analyze your activities within 1 minute.

Compatibility Note: Mobile phones must support Android 4.4 or iOS 8.2 or above, and Bluetooth 4.0 or above.

Download Options:

• For iOS devices: Scan the QR code or search "AGPTEK" in the App Store.
• For Android devices: Scan the QR code or search "AGPTEK" in Google Play.

⭐ Bind Smart Watch to App

1. Open the "AGPTEK" app and tap "Mine".
2. Tap "Connect to tracker" and select "W06" from the scanned device list to connect.
3. Pairing Process:
   • iOS system: A pairing request will appear. Tap "Confirm" to connect.
   • Android phones: No pairing request will appear; connect directly.
4. Binding is complete.

Note: You need to bind your watch through the AGPTEK app, not directly via your phone's Bluetooth connection.

Bluetooth Auto Re-connection:

1. If the watch goes out of Bluetooth connection range, there will be no reminder on the watch. However, Bluetooth will automatically reconnect when the watch re-enters the valid range.
2. If you close the background application, restart your phone, or use a "one-click clean-up" feature, you will need to re-enter the "AGPTEK" app. Bluetooth will then automatically reconnect within the valid range.

⭐ Smart Watch - Main Menu

Switch Interface

Press the MFB to switch between different interfaces: Main interface > Activity track > Sleep monitor > Heart rate monitor > Blood pressure monitor > Multi-sport mode > Stopwatch > Message > Brightness adjustment > Find phone > Power off.

Function & Operation

1. Main interface

Hold MFB for 4 seconds to cycle through 4 different watch dials.

2. Activity track

Record every step and distance you walk each day. Display the total calories burned based on walking steps, your set height, and weight in the app. These data will synchronize and update in the app.

3. Sleep monitor

Record your sleep from 10:00 PM to 8:00 AM the next day. The watch exits sleep monitoring mode after generating the data. Sleeping data detected by the watch will be synchronized and updated to the "Sleep" section in the app by manually pulling down the "Today" page.

4. Heart rate monitor

In the heart rate interface, hold MFB for 4 seconds to start detecting your heart rate. It will continuously monitor until the watch vibrates, indicating the measurement is done.

5. Blood pressure monitor

In the blood pressure interface, it will automatically detect your blood pressure until a vibration is felt, indicating the measurement is finished.

6. Multi-sport mode

In this interface, hold the MFB to access its sub-menu, which includes Running, Mountaineering, Riding, Swimming, Ping pong, Basketball, and Football. Press MFB to switch between different modes.

7. Stopwatch

Find Stopwatch in the main menu, hold MFB for 4 seconds to access its function until an Alarm Clock icon displays. Press MFB to start timing and press it again to stop timing. Exit the stopwatch by holding the MFB for 4 seconds.

8. Message

Find Message in the main menu, hold MFB for 4 seconds to check your messages. Press MFB to view the whole content of a message or switch to another. The watch saves the last 3 messages recently pushed by the app.

9. Brightness adjustment

Find Brightness adjustment on the main menu, hold MFB for 4 seconds to access its function. Press MFB to switch between different brightness levels (available in 6 levels).

10. Find phone

Switch to the Find Phone interface, hold MFB for 4 seconds to start searching for your phone. When found, your phone will vibrate or ring.

11. Power off

Switch to the Power off interface, hold MFB for 4 seconds to access its function and select "yes" by pressing MFB to turn off the watch.

⭐ AGPTEK App - Main Menu

The AGPTEK app provides various functionalities:

• Today page: Displays daily fitness data, including Heart Rate, Blood Pressure, Steps, Calories, Distance, and Sleep.
• Sports page: Allows you to start running. Connect your mobile phone's GPS to see real-time run stats and record a map of your workout route.
• Friends page: Add friends who have registered with the app. You can search for friends by their nickname, phone number, or email.
• Mine page: Set your personal information and access other AGPTEK Watch functions, such as Call Reminder, Message Reminder, Shake Snapshot, and Find Bracelet.

⭐ Mine - Submenu

When you navigate to the "Mine" page, a related list of options will appear:

• User Settings: Set your personal information (nickname, height, weight, gender, etc.) and change your password.
• Target Steps: Scroll to select your desired daily step target (from 3000 to 30000 steps) and tap "Confirm".
• Sleep Target: Scroll to select your desired sleep duration (hours: 00-09h; minutes: 00-59m) and tap "Confirm".
• Device Management: Enable or disable features like "Lift wrist to activate screen", "Call Remind" ?, "SMS Remind" ✉️, "Continuous HR monitoring", "Do Not Disturb", and "More Reminders" from various applications (e.g., Wechat, QQ, Skype). You can also disconnect the watch, set alarms, change time format, units, upgrade, and reset your watch.
• Find Bracelet: Search for your watch ?. The watch will vibrate if found successfully.
• Shake Snapshot: Access your smartphone's camera ?. Take photos remotely by shaking your watch.
• About: Check the app version, access FAQs ℹ️, and submit suggestions or feedback.

⭐ FQA (Frequently Asked Questions)

What if you can't search for the watch?

1. First, check if the watch has power.
2. Bring the watch close to your mobile phone and try to connect again. If it still fails, try toggling your phone's Bluetooth or restarting both the phone and the watch.

Cannot bind to Phone's Bluetooth occasionally?

1. Bluetooth connection can be affected by signal interference. Ensure you are in an environment without strong magnetic fields or Bluetooth interference.
2. Sometimes, restarting a mobile phone's Bluetooth service can cause temporary connection issues. Usually, re-establishing the Bluetooth connection resolves this.

Set up a call notification. Why the watch does not vibrate to remind me when there is a call? ?

1. Confirm that Bluetooth is turned on and connected to the watch.
2. Ensure the AGPTEK App (Android and iOS) is running in the background. Tip: Some phone cleaning or housekeeping apps might close background processes; add the AGPTEK app to your phone's whitelist.

Why the watch can't receive the message pushed by the applications of phone? ✉️

1. Confirm that the message push switch is enabled in your mobile phone's settings.
2. Ensure messages are displayed normally in your phone's notification bar. The watch receives messages by reading this notification bar. If there are no notifications on the bar, the watch won't receive them. Check your phone's notification settings for specific apps (Wechat, QQ, SMS, etc.) and enable them.
3. Open the auxiliary function settings of the watch client in your phone's settings.

Apple mobile phone settings:

1. Confirm that the message push switch is turned on at the mobile phone client.
2. Ensure notification settings for specific apps (Wechat, QQ, phone, SMS) are enabled in your mobile phone's settings.

Why did my heart rate monitoring fail? ❤️

When measuring heart rate, remain still and ensure the bottom of the watch is close to your arm without gaps. Do not shake your arm during measurement.

Why does the blood pressure value deviate from the sphygmomanometer?

1. The deviation between the watch's measurements and a sphygmomanometer is due to various factors.
2. The sphygmomanometer measures in the brachial artery, while the watch measures in smaller arterioles. Typically, aortic blood pressure and arteriole blood pressure can differ by 3-40 mmHg.
3. If measuring simultaneously, the sphygmomanometer's cuff pressure below the elbow can affect blood flow to the lower artery branches, potentially increasing the deviation in blood pressure readings.

Why can't you wear a watch to take a hot bath? ?

1. High bath water temperatures produce water vapor.
2. Water vapor molecules are small and can seep through the watch casing. When the temperature drops, condensation can form inside, potentially causing short circuits and damaging the watch.

Why is the watch not sensitive to touch?

1. Oil or water on the touch screen can cause malfunction. Dry the screen with a clean cloth.
2. Sweat or water on your finger can also make the touch screen insensitive.

⭐ Maintenance

1. Clean the watch regularly, especially the inside, to keep it dry.
2. Adjust the watch's tightness to ensure air circulation.
3. Avoid using excessive skin care products while wearing the watch.
4. If you experience skin allergy or discomfort, discontinue use.

⭐ Specifications