AGPTEK G20 Smart Watch - Welcome Guide

Product Overview

The AGPTEK G20 Smart Watch features an Up Button (Power/Back Button), a Touch Screen, a Down Button (Exercise Shortcut), Charging Contacts, and an Optical Sensor on the back.

Note: Long press the up button to power on.

Charging Watch

Attach the supplied magnetic charger to the charging contact on the back of the watch, and insert the other end of the charger into a USB wall charger or USB interface of a computer.

Download App

1. Download "GloryFit" from the Apple App Store or Google Play Store (Android App store).
2. Scan the QR code provided.

Note: Your mobile phone must support Android 4.4/iOS 8.0+ and Bluetooth 4.0+.

Binding

1. For first use, start the "GloryFit" App, register, and log in.
2. Navigate to [Device] > [Add a new device] > [Select device].
3. After searching, select and tap "G20" to complete the connection.

Smart Watch - Main Menu

Main Interface

The watch offers 3 main interfaces. Long press the screen on the main interface to enter. Swipe left/right to switch between interfaces, and tap to confirm.

You can also customize the main interface by going to [Device] > [Dash Board] in the App and selecting [Custom Dial] to choose your favorite picture.

Pedometer

The Pedometer provides 24-hour real-time recording of your steps, walking distance, and burned calories. This data can be viewed after syncing with the App.

Heart Rate & Blood Pressure Monitor

1. Enter the heart rate or blood pressure interface to begin real-time monitoring.
2. The data will be synchronized to the App, allowing you to analyze your heart rate and blood pressure conditions.

Note: Blood pressure measurement data is for reference only and cannot be used as a basis for medical-related aspects.

Blood Oxygen Monitor

Access the blood pressure interface to enter the real-time monitoring mode for blood oxygen. The data and analysis chart are displayed on the watch.

Exercise

Switch to the Exercise interface using the down button. Swipe up/down to freely switch between 7 different sports. Select your preferred sport and tap its icon to start. To exit the current sport, swipe right on the touch screen.

Weather

Displays the current weather. Weather information will be shown or updated only when the watch is successfully connected to the App.

Message

Switch to the message interface or swipe up on the main interface. Select and click the message you wish to check. Click again to view the entire content. Swiping right on the current message will exit the message view.

Stopwatch

Tap the Stopwatch interface to access its function. Swipe right to exit the recording time.

Find

Tap the Find interface to start searching for your mobile phone. If the search is successful, your phone will vibrate or ring to remind you.

Note: Swipe down on the main interface for quick access to this interface.

Setting

Access the Setting interface to find options such as Reset, Info, Bright, and Off.

1. Reset: Resets your watch.
2. Info: Checks the firmware version and Bluetooth information.
3. Bright: Adjusts the watch's brightness.
4. Off: Turns off the watch.

Note: Setting, Info, and Bright can be quickly accessed by swiping down on the main interface.

Other Functions

Reminder

Reminders for calls, SMS, and SNS need to be enabled in the App and require the watch and App to remain connected. These reminders will vibrate to notify you.

Sleep Monitor

Record your sleep from 23:00 to 8:00. Detected sleep data is displayed only in the App, not on the watch. Sync and update data by manually pulling down the "Home" page of the App.

Attentions

• Do not use a power adapter over 5V/2A to charge the device.
• This device is an electronic product and not intended for medical reference. Detected data is for reference only.
• Blood pressure monitoring method: Rest quietly for over 5 minutes before monitoring. Do not eat, smoke, take medicine, or drink coffee for 2 hours before monitoring.
• Monitoring process: Assume a comfortable, restful sitting position and keep your mind at ease. Do not speak. Place the watch at the same height as your heart.

FAQ

Why is the measurement of blood pressure inaccurate?

Inaccuracy may be affected by the external environment and the individual's skin color. The data is used to monitor changes in blood pressure and is not a substitute for monitoring the blood pressure of patients with hypertension.

Why can't I receive notifications?

1. Android: When you enable QQ/Wechat reminders for the first time, the App will automatically obtain the corresponding permissions.
2. iOS: When Call, SMS, SNS reminders are turned on in the App, your phone will automatically display an access request; simply select OK.

Specifications