G22 Smart Watch - Welcome Guide

Thanks for choosing AGPTEK.

Please read this user manual carefully before use and keep this instruction for future reference. For any problems about this product, please feel free to contact AGPTEK at support@agptek.com.

Product Overview

Note: Long press the red button to power on.

Charging Watch

1. Buckle the watch into the charger seat as shown in the picture. It needs to be charged to activate the watch when it is started for the first time.
2. Insert the USB end of the charger seat into a USB wall charger or USB interface of a computer.

Wear/Install

1. Wear: Wear the wristband one finger away from the wrist bone and adjust the tightness of the wristband to a comfortable position.
2. Replace The Strap: Flip the switch and take out the wristband. (A: Switch)

Tip: Wearing too loosely may affect the accuracy of heart rate data.

Download App

1. Download "GloryFit" from "Apple Store" or "Google Play Store" (Android App store).
2. Scan the QR code provided in the documentation.

Note: Mobile phone must support Android 4.4/iOS 8.0+ and Bluetooth 4.0+.

Binding

1. For first use, start App "GloryFit", register and log in.
2. Go to [Device] > [Add a new device] > [Select device].
3. After searching, select and click "G22" to complete the connection.

Smart Watch - Main Menu

Main Interface

3 main interfaces are available. Press and hold (2 seconds) the touch point on the main interface to switch.

Pedometer

24-Hour real-time recording of your steps, walking distance, and burned calories during that day. They can also be viewed after syncing to the App.

Heart Rate

In the heart rate interface, it will enter into real-time monitoring. These data will be synchronized to the App in time and analyze the conditions of your heart rate in the watch and App.

Note: The data of heart rate measurement are for reference only and cannot be used as a basis for medical related aspects.

Sports

Switch to the Sports interface, and press and hold (2 seconds) to access 7 different exercises. Select one of your favorite exercises, press and hold (2 seconds) to start it. To exit the current exercise, press and hold (2 seconds) to exit or press the red button to return.

Message

Switch to the message interface, press and hold (2 seconds) to access the message.

Setting

Switch to this interface, press and hold (2 seconds) to access its function. A relative list will show:

• Bright: Adjust the brightness of the watch.
• Info: Check the firmware version and Bluetooth information.
• Reset: Restore the watch to factory state.
• Find: Find the mobile phone.
• Off: Turn off the watch.

Other Functions

Reminder

The reminders (Call, SMS, SNS) need to be turned on in the App and always stay connected between the watch and App. All these reminders will vibrate to notify.

Sleep Monitor

Record your sleep from 23:00 pm to 8:00 am. The detected data only show in the App, not the watch. Sync and update the data through manually pulling down the "Home" page of the App.

Attentions

• DON'T use over 5V/2A power adapter to charge it.
• This device is an electronic product, not for medical reference, so the detected data is for reference only.

Monitoring process:

Take a comfortable, restful sitting position and keep your mind easeful. Forbidden to speak. Place the watch at the same height as your heart (as shown in the diagram).

FAQ

Why can't I receive the notification?

1. Android: When you turn on the QQ/Wechat reminder for the first time, the App will get the corresponding permissions automatically.
2. iOS: (Call, SMS, SNS) When the reminders in the App are turned on, your phone will automatically pop up the accessing request; you just need to select OK.

Specifications