Behringer ULTRABASS BXD3000H Quick Start Guide

Your guide to setting up and operating the Behringer ULTRABASS BXD3000H, a 300-Watt, 2-Channel Bass Amplifier Head featuring an FBQ Spectrum Analyzer, Ultrabass Processor, and Compressor.

Important Safety Information

Please read all safety instructions before use. Terminals marked with a lightning bolt symbol [⚡] carry sufficient electrical current to constitute a risk of electric shock. Use only high-quality professional speaker cables. Do not remove covers; refer servicing to qualified personnel. Avoid exposure to rain or moisture. Keep away from heat sources. Ensure proper ventilation. Dispose of product and batteries responsibly according to WEEE directives.

Step 1: Hook-Up

This section outlines the basic connections for your ULTRABASS BXD3000H.

Connect Speaker: Ensure the amplifier is powered down. Connect the BXD3000H SPEAKER OUTPUT to an external speaker using a 1/4" speaker cable. Do not use an instrument cable for this connection.
Connect Bass Guitar: Plug your bass guitar into the INPUT JACK using a standard instrument cable (1/4" mono plug).
Initial Control Settings: Set GAIN 1 and LEVEL controls to their minimum positions. Set the MASTER control to the 9 o'clock position.

Step 2: Controls

Familiarize yourself with the amplifier's controls:

POWER: Turns the amplifier on/off.
INPUT JACK: Connect your bass guitar here.
GAIN 1: Adjusts input gain for Channel 1.
CH 2 Button: Switches between Channel 1 and Channel 2. Can also be controlled via footswitch.
GAIN 2: Adjusts input gain for Channel 2, blending in distortion as you turn it clockwise.
SHAPE: Adjusts frequency scoop for Channel 2 tone.
LEVEL: Adjusts the volume for Channel 2, used to balance with Channel 1.
FBQ EQUALIZER: 7 slide controls for frequency bands (±12 dB boost/cut).
FBQ Button: Activates the FBQ spectrum analyzer, showing frequency band energy via LED brightness. The equalizer is always active.
COMPRESSOR Button: Activates the compressor for both channels.
COMPRESSOR Knob: Controls compression intensity.
ULTRABASS Button: Activates the Ultrabass function, adding ultra-low frequencies.
ULTRABASS Knob: Controls the intensity of the Ultrabass effect.
MASTER: Sets the overall output volume.
PHONES Jack: For connecting headphones.
IEC Connector: For power supply.
DIRECT OUTPUT (XLR): Balanced output for connecting to a mixing console.
SPEAKER OUTPUT Jack: For connecting to an external speaker.
SEND/RETURN Jacks: For connecting external effects units.
CD IN Jacks (RCA): For connecting external stereo sources (e.g., CD/MP3 player).
LINE OUT Jack: Sends signal (pre-power amp) via a 1/4" mono cable.
FOOTSW(ITCH) Jack: Connect the included footswitch to change channels and activate/deactivate ULTRABASS.

Step 3: Getting Started

Follow these steps to get your amplifier up and running:

Ensure the amplifier is powered down. Connect the SPEAKER OUTPUT to an external speaker using a speaker cable.
Plug your bass guitar into the INPUT JACK with an instrument cable.
Set GAIN 1 and LEVEL to minimum, and MASTER to the 9 o'clock position.
Power up the amplifier by pressing the POWER button.
While playing, rotate the GAIN 1 knob clockwise until you achieve a satisfactory volume.
Push the CH2 button to switch to Channel 2.
Adjust the tone on Channel 2 using the GAIN 2, SHAPE, and LEVEL knobs.
Use the FBQ EQUALIZER sliders to fine-tune specific frequency bands.
Push the FBQ button to visualize frequency band energy levels via the slider LEDs.
Customize your bass tone further by engaging the COMPRESSOR and ULTRABASS buttons and adjusting their respective controls.
Adjust the overall output volume using the MASTER knob.

Specifications

Audio Inputs: Instrument Input (1/4" mono, unbalanced, ~240 Ω), Power Amp Input (1/4" mono, unbalanced, ~100 kΩ), CD Input (1/4" mono, unbalanced, 43 kΩ).

Audio Outputs: Phones Output (1/4" mono, unbalanced, ~47 Ω), Direct Output (XLR, balanced, ~200 Ω), Line Output (1/4" mono, unbalanced, ~200 Ω), FX Insert Send (1/4" mono, unbalanced, ~2.2 kΩ).

Loudspeaker Connectors: 1 x 1/4" mono jack, unbalanced; 1 x professional speaker connector (min. 4 Ω load impedance).

System Data: Max Output Power: 300 W @ 4 Ω or 180 W @ 8 Ω. Power Supply/Voltage: Varies by region (120V~, 220-240V~, 100V~). Power Consumption: 85 W. Mains Connection: Standard IEC receptacle.

Dimensions/Weight: Dimensions (H x W x D): approx. 4.6 x 17.7 x 8.9" / 117 x 450 x 225 mm. Weight: approx. 7.7 lbs / 3.5 kg.

Other Important Information

Register your product online at musictribe.com for efficient repair claims and warranty information. Contact authorized resellers or online support for malfunctions. Ensure correct mains voltage and use appropriate fuses. Always follow safety instructions.

	Behringer Ultrabass BXD3000H 300W 2-Channel Bass Amplifier Head Explore the Behringer Ultrabass BXD3000H, a lightweight and powerful 300W 2-channel bass amplifier head featuring Class-D technology, an FBQ Spectrum Analyzer, Ultrabass processor, and integrated compressor for versatile tone shaping.
	Behringer BASS V-AMP / BASS V-AMP PRO User Manual Comprehensive user manual for the Behringer BASS V-AMP and BASS V-AMP PRO bass amplifier modeling processors, detailing features, operation, safety instructions, specifications, and warranty information.
	Behringer ULTRACOUSTIC ACX450: 45-Watt 2-Channel Acoustic Guitar Combo Amplifier with FX and FBQ Discover the Behringer ULTRACOUSTIC ACX450, a versatile 45-watt, 2-channel acoustic instrument amplifier. Featuring dual FX processors, revolutionary FBQ Feedback Detection, an 8-inch BUGERA speaker, and comprehensive EQ, it's designed for singer-songwriters and solo performers.
	Behringer A800 Professional Power Amplifier Quick Start Guide Concise quick start guide for the Behringer A800 Professional 800-Watt Reference-Class Power Amplifier, covering safety instructions, hook-up diagrams, controls, and specifications.
	Behringer ULTRATONE KXD15/KXD12 Quick Start Guide A comprehensive guide to setting up and operating the Behringer ULTRATONE KXD15/KXD12, a powerful 600-Watt 4-Channel PA System and Keyboard Amplifier featuring Turbosound speakers, Klark Teknik multi-effects, and FBQ Feedback Detection.
	Behringer ULTRATONE KXD12: 600W 4-Channel Keyboard Amplifier with KLARK TEKNIK FX Explore the Behringer ULTRATONE KXD12, a powerful 600-Watt, 4-channel keyboard combo amplifier. Featuring a 12" TURBOSOUND speaker, KLARK TEKNIK Multi-FX processor, and FBQ feedback detection, it offers versatile sound shaping for keyboards, vocals, and PA applications.
	Behringer KM750 Professional Stereo Power Amplifier with ATR Technology Discover the Behringer KM750, a 750-Watt stereo power amplifier featuring Accelerated Transient Response (ATR) technology for exceptional punch and clarity. Ideal for musicians, it offers robust build quality, versatile connectivity, and reliable protection.
	Behringer 2012 Product Catalog: Comprehensive Audio Equipment Guide A detailed overview of Behringer's 2012 product line, covering mixers, amplifiers, speakers, microphones, DJ equipment, guitar and bass gear, effects pedals, and accessories. Features product specifications, key technologies, and artist endorsements.