WELLFOR Concealed Shower Installation Guide
Model: WK0736
Before Installation
This product has been inspected and debugged by the factory to the best condition. Please do not disassemble and assemble it yourself.
Before installing the faucet, please be sure to remove sundries and sludge from the water pipes to prevent sundries from blocking the faucet.
Cleaning pipes: [Icon: water pipe] Please remove sundries and sludge from water pipes before installation.
Installation Steps
-
Step 1: Prepare Pipe Grooves
Dig pipe grooves for pre-burying pipes.
Diagram Description: Shows a cross-section with dimensions indicating pipe groove depth (1.57 inches) and width (2.36-2.56 inches).
-
Step 2: Install Main Body
Install main body inlet and outlet pipes. Ensure the main body is flush with the tile surface.
Diagram Description: Illustrates the main valve body being installed into a wall cavity, with connections for hot and cold water, and outlets for the shower head and hand shower. Shows the unit positioned flush with the intended tile line.
-
Step 3: Install Panel
Fix ceramic tiles. Cut off the edges of the embedded box, remove the protective cover, and install the panel.
Diagram Description: Shows ceramic tiles being fitted around an embedded box, with a cut-out for the panel. The protective cover is shown being removed before panel installation.
-
Step 4: Install Diverter and Handle
Install the diverter and handle.
Diagram Description: Shows the diverter mechanism and the handle being attached to the main body.
-
Step 5: Install Shower Outlets
Install the upper outlet pipe and hand-held shower bracket. Wrap PTFE tape on the thread for a secure connection.
Diagram Description: Illustrates the installation of the shower arm pipe and the bracket for the hand shower, with a call-out for applying PTFE tape to the threads.
-
Step 6: Install Shower Heads
Install the rain shower head and hand-held shower head.
Diagram Description: Shows the final attachment of the rain shower head to the shower arm and the hand shower to its hose and bracket.
Parts List
| No. | Item | Qty |
|---|---|---|
| 1 | Shower arm | 1 |
| 2 | Shower head | 1 |
| 3 | Hand shower | 1 |
| 4 | Hand shower bracket connection | 1 |
| 5 | Hand shower bracket | 1 |
| 6 | Shower hose | 1 |
| 7 | Valve body (With embedded box) | 1 |
| 8 | Deck plate | 1 |
| 9 | Diverter | 1 |
| 10 | Handle | 1 |
| 11 | Hexagon socket screw | 3 |
| 12 | Decorative button | 1 |
| 13 | Accessory bag | 1 |
Check accessories: When you open the product packaging, please check whether the items in it are consistent with the main body and accessories you purchased. If there is any inconsistency, please contact our company or our distributor.
Note: 1. Accessories are subject to change without prior notice if the change does not affect usage; 2. The appearance of the product is subject to the physical objects you receive, and the schematic diagram is only for reference.
Cleaning Care
In order to keep the appearance of the faucet clean, bright and good performance, please take care of the faucet as follows:
- Rinse with water ? and dry with soft cotton cloth ☁️.
- Use mild liquid cleaner ✨ and colorless glass cleaner to remove surface dirt and scale film, or use polish without abrasive effect.
- Avoid abrasive detergents ?, polish, emery cloth, paper towel, or scraper.
- Avoid acid cleaners ?, or cleaners with insoluble grains.
- If mud accumulates in the bubbler ⚙️, unscrew it, rinse with water ?, and reinstall.
United States Certification
This product has received certifications from recognized bodies such as IAPMO Research and Testing, Inc., indicating compliance with relevant standards like NSF/ANSI/CAN 61 for drinking water system components.
Visual Description: Page 2 displays multiple certification documents and logos, including UPC, IAPMO, and NSF/ANSI/CAN 61 compliance marks, issued to QIANG YING HOSE FACTORY.
