1-Wall Light Fixtures
Model: PM2205-1W
Product Description
This document provides assembly and installation instructions for the WELLFOR 1-Wall Light Fixtures, model PM2205-1W. It is designed for wall mounting and features a decorative style.
Safety Precautions
CAUTION: Turn off the main power at the circuit breaker before installing the fixture to prevent electrical shock.
General Information
All electrical connections must comply with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring, consult a qualified electrician.
Before assembly, remove the fixture and mounting hardware from the box. Verify that all parts are present by referencing the illustrations provided.
Assembly Steps
Follow these steps for assembly:
Component Identification and Wiring Guide
The following lists correspond to the component labels (A-M) and wiring connections shown in the diagrams:
Assembly Steps List:
- 1. H - G
- 2. C, D - A
- 3. K - J
- 4. L - J
- 5. E - B
- 6. F, I - G
- 7. M - J
Wiring Diagram Description:
Connect the white supply wire to the white or identified fixture wire using a wire nut. Connect the black supply wire to the black or plain fixture wire using a wire nut. Connect the ground wire from the supply (bare or green) to the fixture ground wire (bare or green) or the green ground screw. Ensure all connections are secure.
Component Exploded View Description:
The fixture consists of the following components:
- A: Mounting Bracket
- B: Fixture Base/Canopy
- C, D: Decorative Screws/Elements
- E: Fixture Arm
- F, I: Mounting Hardware
- G: Fixture Ground Wire (Green or Bare)
- H: Fixture Mounting Screws
- J: Fixture Wires (White, Black)
- K: Fixture Shade/Housing
- L: Light Bulb Socket
- M: Light Bulb (not included)
Diagram of Wall-Mounted Fixture:
A line drawing shows a wall-mounted light fixture with a curved arm extending from a wall plate, supporting a decorative lantern-style shade.
Important Notes
Read and save these instructions for future reference.
ATTENTION: Disconnect power at the circuit breaker before installation to avoid electrical shock.
GENERAL INFORMATION: All electrical connections must comply with national and local electrical regulations. If unsure about wiring, contact a qualified electrician. Unpack the fixture and mounting accessories, and verify all parts against the illustrations in this manual.
