SG3 / SG4 / SG5 Gantry Systems
Product Specifications
Screen Size: 33 - 57 inches
Guide Max. Weight: 40-50kg per screen
*Please check model specific details before installing*
Revision Date: 16/07/24
Warning and Safety Information
WARNING:
Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier claims agent and do not continue the installation until it has been reviewed. Please watch for pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring-loaded parts. Before installing, make sure that the supporting surface will support five times the combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also layout all components to ensure that you have all of the required parts before proceeding (see BOM list on following page). Use of this product for anything other than its specified use may result in failure or personal injury. This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Tools and Installers Required
| # | Tools Required | Installers Required |
|---|---|---|
| 1 | 4mm & 5mm Allen Keys | 2 |
| 2 | Pozi Head Screwdriver | |
| 3 | 17mm Spanner |
Components
| # | Description | QTY |
|---|---|---|
| 1 | SG3 - Three Arm Gantry | 1 |
| 2 | SG4 - Four Arm Gantry | 1 |
| 3 | SG5 - Five Arm Gantry | 1 |
| 4 | Heavy Duty Column Length | 1 |
| 5 | CP5 Gantry Ceiling Plate | 1 |
| 6 | Universal Screen Mount (PZW) | 3, 4 or 5 |
Installation Steps
Step 1: Fix Ceiling Plate and Column
Diagram showing the CP5 ceiling plate being fixed to the ceiling using 8 pre-defined holes. It then shows the column being inserted into the ceiling plate socket and secured with a through bolt.
Fix the CP5 ceiling plate into position via the 8 pre-defined fixing holes. Place the column length into the ceiling plate socket, as shown above, and fix the through bolt into the ceiling plate and through the column. This will secure the column.
Step 2: Attach Gantry to Column
Diagram illustrating the spider gantry being offered up to the other end of the column and threaded into the socket. A through bolt secures the gantry to the column. Grub screws on the side of the through bolt are shown being tightened.
Offer up the Spider Gantry of your choice to the other end of the column and thread into socket. Once in position, as before, fix the through bolt into the gantry and through the column. Tighten the grub screws located on either side of the through bolt here and on the CP5 ceiling plate.
Step 3: Attach Backplates to Gantry Arms
Diagram showing a universal screen mount backplate being affixed to one of the gantry arms. The process is repeated for all gantry arms.
Take one of the universal screen mount backplates and affix it to the plate at the end of one of the gantry arms, as shown. Repeat this step so that each gantry arm sits with a universal backplate fixed into position.
Step 4: Mount Arms to Screen
Diagram showing the arms being attached to the back of a screen using provided tag locks and fixing pack. An arrow indicates the 'hook' part of the arm should be at the top.
Utilising the tag locks and fixing pack provided with your mount, attach the arms to the back of your screen. Ensure the arms are the correct way up before tightening - the 'hook' part of the arm should be at the top.
Step 5: Lift and Position Screen
Diagram showing a screen being lifted by another person and offered up to the backplate. The arms are shown hooking over the lip of the backplate. A second diagram shows centering the screen horizontally.
Using another team member, lift the screen up and gradually offer it up to the back plate. Gently tilting the screen forward, hook the arms over the lip of the back plate and lower once in position. Centre the screen horizontally by sliding from side to side until you are happy with the position.
Step 6: Secure and Level Screen
Diagram illustrating the screen being secured. Top screws are tightened to level the screen, followed by bottom screws. An alternative shows adjusting tilting arms. A note indicates position cannot be adjusted after screws are tightened.
Once centered, ensure the bottom screws are not screwed tight and screw down the top screws to level the screen. Once level tighten bottom screws to secure the mount. ALT: If using tilting arms, this is when you can adjust them to suit. Note that you won't be able to adjust the screens position after the screws have been tightened.
Step 7: Position Multiple Screens
Diagram showing one screen pulled out and an arm extended. A second screen is placed and aligned with the first, with a note about a 10mm gap and adjustable arms until tightened.
Once one screen is in position, gently pull it out, extending the arm on the gantry mount. Place a second screen and start to align both screens to the desired position - ie corners touching, 10mm gap etc. Until tightened, arms can be adjusted as required. Repeat for additional screens.
Step 8: Final Tightening
Diagram showing all screens in position, with screws on each gantry arm being tightened to prevent movement.
Once all screens are in position, tighten the screws located on each gantry arm. This will prevent movement and ensure screens stay in the desired position.
