NOMA 052-8867-6 Plug-in Timer Instruction Manual

A. Functions

The NOMA 052-8867-6 timer is designed to preset specific on/off times for home electrical appliances such as coffee machines and lamps. It is ideal for energy saving and enhancing home security.

• The large LCD displays program setting status and the current time.
• It supports a maximum of 140 on/off settings per week.

B. Diagram & Descriptions

The timer features a NOMA logo and an LCD display. The following table details the functions of each button:

C. Time Display

There are two different kinds of time displays:

1. 12-hour display: The digital number ranges from 11:59 to 12:00 with AM or PM shown on the LCD.
2. 24-hour display: The digital number ranges from 00:00 to 23:59, with no AM or PM shown on the LCD.

To change from 12-hour to 24-hour display, or vice versa, press and hold the CLOCK button until the LCD shows "12H" or "24H". Press the HOUR button to choose the desired display mode. Press CLOCK to return to the real time display.

Note: The LCD must be in real-time display to start week and time setting. If the LCD is in program setting display, press the CLOCK button once to return to real-time display. The time display format is primarily 24-hour, with a 12 to 24-hour conversion function.

D. Real Time Setting

1. Press and hold the CLOCK button, then press the WEEK button. The week patterns are shown in the following sequence by pressing the WEEK button each time: Mo → Tu → We → Th → Fr → Sa → Su →.
2. Press and hold the CLOCK button, then press the HOUR button. The hour increases slowly one by one each time you press the HOUR button. If you press and hold CLOCK + HOUR buttons simultaneously, the hour will advance quickly.
3. Release the HOUR button when the desired hour is displayed on the LCD.
4. Press and hold the CLOCK button, then press the MINUTE button. The minutes increase slowly one by one each time you press the MINUTE button. If you press and hold CLOCK + MINUTE buttons simultaneously, the minutes will advance quickly.
5. Release the MINUTE button when the desired minutes are displayed on the LCD.

E. Program Setting

1. When the LCD is in real-time display, press the PROGRAM button once to start setting. "ON" will be shown on the lower left corner of the LCD.
2. "1" indicates the program group number (program groups are from 1 to 20).
3. "ON" indicates the power-on time.
4. "OFF" indicates the power-off time.
5. To choose the program group and ON/OFF status, press the PROGRAM button to advance the group number. The sequence is as follows: 1ON → 1OFF → 2ON → 2OFF → ... → 20ON → 20OFF.
6. After choosing the program group, set the week and time. Press the WEEK button to choose the week pattern. The LCD will display the following in sequence by pressing WEEK each time:
   • MO TU WE TH FR SA SU
   • MO WE FR
   • TU TH SA
   • SA SU
   • MO TU WE
   • TH FR SA
   • MO TU WE TH FR
   • MO TU WE TH FR SA
   • MO TU WE TH FR SA SU
7. Then, set the on/off time for the preset program.
8. Press HOUR to set the number of hours.
9. Press MINUTE to set the minutes.
10. To set other program groups' on/off times, repeat procedures #2 to #7.

Note:

• (a) To change a preset program, repeat procedures #2 to #7 as mentioned in Part E and input the new data to replace the old setting. Alternatively, press RST/RCL once to reset the program. Press the same button again to recall the original setting.
• (b) After program setting, press the CLOCK button to return to clock display immediately, or it will return automatically after 15 seconds if no other buttons are pressed.

F. Override/Resume Preset Program

Pressing the ON/OFF button each time can override or resume the preset program. The LCD changes the display in the following sequence:

• ON: Overrides the preset program and the appliance remains on.
• AUTO: Resumes the preset program. The appliance will be turned on and off automatically according to the preset time.
• OFF: Overrides the preset program and the appliance remains off.

G. Connections

1. Preset your desired On/Off programs on the Timer as mentioned above.
2. Switch off your electrical appliance.
3. Connect your appliance's power cord to the Timer's socket, then connect the Timer to the AC socket to get power.
4. Switch on your appliance.
5. The appliance will then be turned ON/OFF according to your preset programs, unless manual override is activated.

H. Safety Precautions

• This Timer is for indoor use only. DO NOT USE OUTDOORS.
• The appliance is to be plugged into the Timer and must not exceed the ratings found in "Specifications" (Section I).
• The Timer uses a rechargeable battery. To power the unit back on, press the reset button while plugged into an outlet.
• This timer features an internal rechargeable battery. If it does not power up immediately when plugged in, leave it in the outlet for 2-5 minutes to allow the battery to charge.

⚠️ CAUTION: Load must not exceed rated capacity.

I. Specifications

• 125VAC 60Hz 5A/625W Resistive
• 125VAC 60Hz 4.8A/600W Tungsten
• Time Setting Interval: 1 Minute

3-year limited warranty

This NOMA product carries a three (3) year warranty against defects in workmanship and materials. Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.