NOMA Outdoor Digital Timer
Models: 052-8873-0, 052-8870-6
Specifications:
- Model 052-8873-0: 125 V AC/60 Hz, 15A/1875 W resistive, 10 A/1250 W tungsten, 8 A ballast, 1/2 HP
- Model 052-8870-6: 125 V AC/60 Hz, 15 A/1875 W resistive, 15 A/1875 W tungsten, 8 A ballast, 3/4 HP, 15 FLA, 90 LRA
Instructions
Charge the Battery
Plug the timer into a wall outlet for 10 minutes to charge the internal battery. You can then unplug the timer and program it comfortably.
Clear the Memory
Use a toothpick to press the 'R' button to erase any previous settings.
Set the Current Time
Press and hold the CLOCK button. Simultaneously, press the HOUR and MINUTE buttons to advance the display to the correct time. Hold the DAY button to set the correct day.
Program the Timer
- Press PROG to display the first ON/OFF setting ("1 ON --:--").
- Use MINUTE and HOUR buttons to set the ON time. Toggle 12 times to switch between AM and PM.
- Use DAY button to select the day or group of days for the setting.
- Press PROG again to display the second ON/OFF setting ("1 OFF --:--").
- Repeat the process to set the OFF time.
- Repeat steps 1-5 for additional ON/OFF settings. Press CLOCK to exit programming mode.
Review On/Off Settings
Review all 20 settings to ensure no unintended ones exist. Press and hold PROG to scroll through all ON/OFF pairs. Stop on any setting to remove or change it.
Revise a Setting
Press and hold PROG to scroll to the desired setting. Use HOUR, MINUTE, and DAY buttons to adjust the ON/OFF time and day(s).
Remove or Restore a Setting
Press and hold PROG to scroll to the desired setting. Press the RST/RCL button. Removing a setting displays dashes; restoring shows the previous setting.
Connect/Operate the Timer
Plug the device into the timer, turn the device ON, and plug the timer into the wall outlet.
Override the Timer
Press the ON-OFF button to cycle through: 'ON' (permanently on), 'OFF' (permanently off), or 'AUTO' (follows programmed settings).
Random Setting Security Feature
While in AUTO mode ('AUTO' displayed), press CLOCK once. Then press and hold HOUR-RND for 3-5 seconds. 'RND' will appear. This feature randomly turns the device on/off for 10-26 minutes and off for 26-42 minutes, overriding preset programs. To cancel, press and hold HOUR-RND for 3-5 seconds again; 'RND' will disappear.
Countdown Setting
Press and hold PROG to scroll through settings until 'd ON --:--' or 'd OFF --:--' appears. Use MINUTE and HOUR to set the duration. Press ON/OFF to display 'AUTO'. Press CLOCK, then press and hold RCL-CD for 3-5 seconds to activate. 'CD' will flash. The device will turn OFF or ON after the countdown. To deactivate, press and hold RCL-CD for 3-5 seconds in CLOCK mode.
Daylight Savings Time Feature
Press and hold CLOCK-DST for 3-5 seconds to advance the time by one hour ('DST' appears). Press and hold CLOCK-DST again to revert by one hour ('DST' disappears).
3-year Limited Warranty
This NOMA® product is covered by a three (3) year warranty against defects in workmanship and materials. Trileaf Distribution will replace defective products free of charge within the warranty period upon return by the original purchaser with proof of purchase. This warranty does not cover wear or breakage due to misuse or abuse.
Product Identification
Model: K20806-R1
Size: 210X297mm
Manual: 说明书-70G普通纸