Aprilaire Dehumidifier
Model E130 | Specification Sheet
SPECIFICATIONS
| Model | E130/E130H | E130C |
|---|---|---|
| Capacity | @ 80°F/60% RH: 130 ppd @ 73°F/60% RH: 105 ppd |
|
| Energy Factor | @ 80°F/60% RH: 2.9 L/kW-h @ 73°F/60% RH: 2.35 L/kW-h |
|
| Airflow @ varying E.S.P. (external static pressure - dry coil) | 0.0" w.c.: 310 CFM 0.2" w.c.: 270 CFM 0.4" w.c.: 225 CFM |
|
| Voltage, phase, frequency | 120VAC, 1 phase, 60 Hz | |
| Current draw(1) | 8.3 Amps | |
| Noise | 50 dBA ducted | |
| Dimensions: (cabinet only)(2) | Width: 19½" Height: 18¾" Length: 30" |
|
| Unit Weight | 98 lbs. | |
| Shipping Weight | 115 lbs. | |
| Inlet air operating conditions during |
-Dehumidification: 50°F–104°F, 40°F dew point min. -Ventilation: 40°F–140°F, 0%-99% RH (non-condensing) |
|
(1)Rated capacity, energy factor and current draw measured at 80°F/60% RH inlet air at 0.0 ESP.
(2)Height does not include adjustable feet. The width excludes the filter doors and length excludes the duct collars.
FEATURES
| Model | E130/E130H | E130C |
|---|---|---|
| Casters or leveling feet | Leveling feet | Casters |
| Control(3) | Built-in digital control with display | |
| Control mounting option | Field-interchangeable from top to front | |
| Cabinet insulation | 1½" EPS | |
| Air discharge orientation | Top or end | |
| Inlet/Outlet duct collars | 10" dia. | |
| Backdraft damper at outlet | Included | |
| Filter | Washable MERV 8 (Part Number 5569) | |
| Refrigerant | R410A | |
| Coil type | Corrosion-resistant aluminum | |
| 8' Power cord(4) | E130 Plug Type | |
| Discharge air temperature rise | 10°F–30°F | |
| Drain connection(5) | 3/4" MNPT Threaded | |
| Included drain tubing | None | |
| Warranty | 5 Years | |
(3)Built-in automatic control capable to be set up for dehumidification and ventilation or zoning.
(4)Model E130H is a hardwired unit and doesn't ship with a power cord.
(5)Threaded barbed fitting included.
MODELS
- E130: Includes 8 ft. power cord
- E130C: Uses casters instead of leveling feet
- E130H: Terminal connection for hardwiring
PRINCIPLE OF OPERATION
The Aprilaire E130 Dehumidifiers are designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit.
Dehumidification occurs until the set point is reached, then shuts off until periodic sampling determines a need for operation.
APPLICATION
The E130 Dehumidifiers are perfect for a wide range of applications including whole-home dehumidification and control of moisture in basements and crawl spaces.
CIRCULATION
The E130 can also be programmed to circulate the air within a crawl space. Circulating the air evens out relative humidity levels and temperature in the space, eliminating variations in the environment.
DIMENSIONS
INSTALLATION OPTIONS FOR THE APRILAIRE E130 SERIES DEHUMIDIFIERS
Shown in horizontal applications, can be installed in vertical applications as well.
Main Return to Main Return - RECOMMENDED
- This application can be used when a supply duct is not available.
- Air is pulled from the return duct, dehumidified, and returned to the return duct.
- Assures that the dehumidified air is mixed with rest of the air in the duct before it re-enters the house.
- This application is for whole-home dehumidification.
Dedicated Return to Main Supply or Dedicated Return to A/C Return
- This application can be used when a return or supply duct is not available.
- Air is pulled through a dedicated return grille, dehumidified, and returned to the supply plenum or return.
- This application is for whole-home dehumidification.
Inlet and Outlet ducted to dedicated grilles
- For homes without duct work. Use of the Model 5546 Living Space Duct Kit recommended.
- Dries a specific area that has a moisture issue (basements, crawl spaces, sealed attics, etc.).
- Dehumidifier can be located in a closet, mechanical room or unfinished area and ducted into a finished room.
Main Return to Main Supply
- Air is pulled from the return duct, dehumidified, and returned to the supply plenum.
- This application is for whole-home dehumidification.
Optional Accessories
Model 5822 Hanging Kit
Weight: 3 lbs. Supports up to 200 lbs.
Model 5546 Living Space Duct Kit
See dedicated grilles installation example above.
Optional Wall-Mount Controls
Model 8620/8620W with IAQ Control
- Universal 2H/2C or 4H/2C HP
- Event-Based™ Air Cleaning
- Humidity or Ventilation
- Touch screen
- Wi-Fi (8620W only)
Model 8910/8910W with IAQ Control
- Universal 3H/3C or 4H/2C HP
- Event-Based™ Air Cleaning
- Humidity and Ventilation
- 2-Part/3-Wire design
- Touch screen
- Wi-Fi (8910W only)
Model 8920W with IAQ Control
- Universal 3H/3C or 4H/2C HP
- Event-Based™ Air Cleaning
- Humidity and Ventilation
- 2-Part/3-Wire design
- Full-color touch screen
- Wi-Fi
Model 76 Wall Mount Dehumidifier Control
- On, Off buttons
- Wall-mounted living space control
- Displays RH and controls to an RH value
- Remote control for crawl space applications and sealed attics
MODEL 76 SPECIFICATIONS
| External | Remote | |
|---|---|---|
| Input voltage and current | Voltage: 24VAC +/-20% Current: 25mA (nominal), 50mA (max.) at 24VAC |
Voltage: 35VDC (supplied by dehumidifier control board) |
| Output | Dry contact, normally open | Communication (RS485) |
| Control range | 40% - 80% RH | 1 (less dry) – 7 (more dry) |
| Accuracy | +/-5% RH | 65°F–40°F dew point |
| Differential | 3% RH | See dehumidifier specifications |
| Low limit | 40°F dew point | 50°F dry bulb, 40°F dew point min. |
| High limit | 99°F dry bulb | 105°F dry bulb |
