Important Information
Important: Retain for future reference. Read carefully.
This document provides assembly instructions for the PawHut D51-276 Small Animal Cage.
Parts List
- A x 1: Wire mesh panel
- B x 1: Wire mesh panel
- C x 1: Wire mesh panel
- D x 2: Wire mesh panels
- E x 2: Wire mesh panel (755mm length)
- F x 2: Wire mesh panel (434mm length)
- G x 4: Vertical wire mesh supports (410mm height)
- K x 1: Plastic base tray
- M x 2: Plastic platform
- N x 2: Wire mesh ramp
- P x 1: Food bowl
- Q x 1: Water bottle with holder
- R x 1: Water bottle
Hardware
- H x 4: Corner connectors
- J x 4: L-shaped connectors
- L x 4: Clips/hooks
- S x 16 (+2 spare): Screws
Assembly Instructions
Step 1: Assemble Base Frame
Connect wire mesh panels E, F, and C to form the base structure. Use four (4) corner connectors (H) to join the panels at the corners. [Diagram shows panels E, F, C being joined by H at the corners to form a rectangular base frame.]
Step 2: Attach Vertical Supports
Insert four (4) vertical wire mesh supports (G) into the designated slots on the base frame. Secure each support from the inside using screws (S). [Diagram shows vertical supports G being inserted into the base frame and secured with screws S from the inside.]
Step 3: Add Side Panels
Attach the wire mesh panels A, D, and B to the vertical supports. Panel A is a front/back panel, D are side panels, and B is another front/back or side panel. [Diagram shows panels A, D, B being attached to the vertical supports.]
Step 4: Secure the Structure
Use L-shaped connectors (J) and screws (S) to further secure the wire mesh panels to the vertical supports and to each other, ensuring a rigid structure. [Diagram shows L-shaped connectors J being used with screws S to reinforce the connections between panels and supports.]
Step 5: Install Base Tray and Accessories
Carefully slide the plastic base tray (K) into the bottom of the assembled cage structure. Place the plastic platform (M) inside the cage. Attach the wire mesh ramps (N) to connect the platform to the base or other levels. Position the food bowl (P) and water bottle (Q/R) within the cage. [Diagram shows the plastic base tray K being inserted, followed by the platform M, ramps N, food bowl P, and water bottle Q/R being placed inside the completed cage.]
Assembly Complete
Recycling Information
FR: Pensez à donner ou recycler. [recycling symbol] or Association or Magasin or Déchèterie
For recycling information, visit: https://quefairedemesdechets.fr
