PawHut D51-276 Small Animal Cage Assembly Instructions
Model: INdlb026V01_GL
IMPORTANT: READ AND KEEP FOR FUTURE REFERENCE.
Parts List
| Part | Description | Quantity | Dimensions |
|---|---|---|---|
| A | Cage Panel | x1 | |
| B | Cage Panel | x1 | |
| C | Cage Panel | x1 | |
| D | Cage Panel | x2 | |
| E | Base Frame/Side Panel | x2 | 755mm |
| F | Base Frame/Side Panel | x2 | 434mm |
| G | Base Frame/Side Panel | x4 | 410mm |
| K | Base Tray | x1 | |
| M | Platform | x2 | |
| N | Ramp | x2 | |
| P | Food Bowl | x1 | |
| R | Water Bottle | x1 |
Hardware
| Hardware | Description | Quantity |
|---|---|---|
| H | Connector/Corner Piece | x4 |
| J | Connector/Corner Piece | x4 |
| L | Connector/Corner Piece | x4 |
| S | Screws | x16 (+2 spare) |
Assembly Instructions
Step 1: Assemble the base frame. Connect the side panels (E) and (F) using the corner connectors (H) at each corner. This forms the rectangular base structure.
Step 2: Attach the vertical support posts (G) to the corners of the base frame. Secure each post using screws (S).
Step 3: Attach two cage panels (D) to the sides of the structure. Use connector pieces (A) and screws (S) to fasten them securely.
Step 4: Attach the remaining two cage panels (D) to the front and back of the structure. Use connector pieces (B) and hardware (J, S) to secure them.
Step 5: Insert the base tray (K) into the bottom of the assembled cage. Place the platforms (M) and ramps (N) inside the cage at desired positions. Finally, add the food bowl (P) and attach the water bottle (R).
