PawHut Small Animal Cage Assembly Guide

Parts List

• A: Cage Base Frame (x1) - The primary wire structure for the cage.
• B: Plastic Base Tray (x1) - The removable tray that fits under the cage base.
• C: Vertical Support Bars (x2) - Longer metal tubes for the main frame.
• D: Middle Shelf/Grate (x1) - A wire grate that fits inside the cage.
• E: Vertical Support Bars (x2) - Longer metal tubes for the main frame.
• H1: Caster Wheels (x2) - Wheels for the bottom of the stand.
• H2: Caster Wheels (x2) - Wheels for the bottom of the stand.
• J1: Connecting Tube (x1) - A short tube, likely for accessory connection.
• J2: Water Bottle Holder (x1) - A bracket to hold the water bottle.
• K: Water Bottle (x1) - A bottle for providing water to the pet.
• L: Fasteners/Clips (x2) - Small clips used for securing parts.
• M: Exercise Wheel (x1) - A wheel for the pet to run on.
• I: Food/Water Dish (x1) - A bowl for food or water.

Hardware List

• F: Screws (M6*35) (x12 + 1 spare) - Used for connecting frame parts.
• G: Nuts (M6) (x8 + 1 spare) - Used with screws for fastening.
• N: Wrench (x1) - Tool for tightening nuts.
• O: Allen Key (x1) - Tool for tightening specific bolts (if applicable, though not explicitly shown in use).

Assembly Instructions

Step 01: Assembling the Cage Body

1. Place the plastic base tray (B) on a flat surface.
2. Attach the cage base frame (A) onto the plastic tray (B), securing it using the clips (L).
3. Attach the cage lid/top section to the assembled base frame (A).

Step 02: Adding Accessories

1. Insert the water bottle (K) into its holder (J2).
2. Connect the tube (J1) to the appropriate port on the cage.
3. Place the exercise wheel (M) inside the cage.
4. Place the food/water dish (I) inside the cage.

Step 03: Constructing the Stand and Attaching the Cage

1. Take the two longer vertical support bars (C) and two longer vertical support bars (E).
2. Attach the middle shelf/grate (D) between the lower sections of the support bars (C and E).
3. Secure the support bars (C and E) to the cage base frame (A) using screws (F) and nuts (G).
4. Attach the caster wheels (H1 and H2) to the bottom ends of the vertical support bars (C and E).
5. Ensure all connections are tightened using the wrench (N) and Allen key (O) as needed.

Assembly Complete: The cage is now fully assembled and ready for use.

Contact & Support

If you have any questions or require assistance, please contact the customer care center.

United States:
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Imported by: Aosom LLC, 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA.
Made in China.

Canada:
Phone: 416-792-6088
Email: customerservice@aosom.ca
Imported by: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9.
Made in China.

United Kingdom:
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH.
Made in China.

France:
Phone: 0033-1-84166106
Email: aosom@mhfrance.fr
Imported by: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France.
Fabriqué en Chine.

Germany:
Phone: 0049-0(40)-87408465
Email: service@aosom.de
Address of Importer/Manufacturer/REP: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany.
Made in China.

Italy:
Phone: 0039-0249471447
Email: clienti@aosom.it
Imported by: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI).
Fatto in Cina.

Spain:
Phone: 0034-931294512
Email: atencioncliente@aosom.es
Importer/Manufacturer/REP: SPANISH AOSOM, S.L., C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
Hecho en China.

Portugal:
Phone: 0034-931294512
Email: info@aosom.pt
Importer/Manufacturer/REP: SPANISH AOSOM, S.L., C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ.
Feito na China.

Recycling Information

FR: DONNEZ OU RECYCLEZ. Adresses sur quefairedemesdechets.fr