Rhino Solar Pro Omni Adjustable Skidsteer Mounted Pile Driver

Product Overview

Rhino Construction Equipment Attachments are professional-grade accessories, designed, built, and supported in the USA, to provide shorter lead-times and unmatched product support. Designed to expedite the installation of solar-panel supports (piles) utilized in ground-mounted solar projects, the Solar Pro's omni-adjustable, powerful 800 ft. lb. (1,085 joule) hydraulic hammer safely increases jobsite productivity and profits.

Features and Benefits

Omni Adjustability

The Pile Driver Attachment is Omni Adjustable to ensure precise, prompt, and plumb, pile installations regardless of the job site terrain.

• Mast tilts 2° right, 90° left, and 10° front and back.
• Attachment adjusts 10" front-to-back, and 24" left to right.
• Accommodates solar panel supports (piles) up to 15' (457.2 cm) tall.

Utilize Existing Skid Steer

• No need for an expensive self-propelled pile driver to complete projects on-time and on-budget.
• Universal Skid Steer mounting plate for quick attachment to most units. Rhino-provided, custom mounting plate available on request.

State-of-the-Art Hydraulic Hammer

Features the Furukawa FX 55 Hydraulic Hammer with a 2-year warranty.

• Designed for efficient driving, dependability, and long life.
• Powerful 800 ft. lbs. (1,085 joules) of Impact energy per stroke (approx. 1,000 blows/min.).
• New and improved piston (increased diameter and longer stroke) increases speed, providing greater impact energy.
• Mono-block design: Reduced maintenance with only two moving parts.

Quality US Materials and Workmanship

Quality US materials and workmanship for dependability, low maintenance, and a long operating life.

• Parts and service available throughout the USA.
• Readily available SAE fittings and hardware; overnight shipment available on most parts.
• Hydraulic components are inventoried or repairable by most local hydraulic repair shops.

Operational Advantages

Optimal Positioning

The Solar Pro is off-set (right-side) so the skid steer operator can easily maintain straight lines.

Diagram Description: Shows the pile driver offset to the right of the skid steer, with arrows indicating mast tilt angles (2° right, 90° left, 10° front/back) and attachment adjustment ranges (10" front-to-back, 24" side-to-side).

Reliable Operation

Designed for dependability, low maintenance, and a long life:

• Minimal grease zerks
• Occasional adjustment
• Designed, built, and supported in the USA

Improved Mobility

Pile Driver Attachment retracts and folds for ease of transportation to and from the job site.

Specifications

Solar Pro Specifications

Note: Custom sizes and shapes are available upon request.

Skid Steer Requirements

Versatility & Adapters

The Solar Pro offers versatility from a single unit, with multiple adapters to provide efficient driving of piles, posts, or beams up to a maximum footprint of 10" x 7.25" (25.4 x 18.4cm) and a maximum height of 15' (457.2 cm) tall.

Image Description: Shows a close-up of a removable adapter plate.

Available Adapters:

Note: Don't see your post type? Contact Rhino Tool Company about custom adapter fabrication.

Solar Pro Complete with 10" Anvil

Pile Puller Kit

Featuring a 1-ton vertical lift plate clamp and safety shackle attached to the steel pull plate on the front of the mast and hammer. A vertical pull capacity of 2000 lbs (1 ton) removes most pile/posts from the ground. This accessory can easily be removed when not in use or while transporting. Part No. 360267.