Xiaomi OpenWear Stereo

Product Overview

Please read this manual carefully before use and keep it for future reference.

Package Contents

The package typically includes:

• A box
• Charging case
• Two earbuds (Left and Right)
• USB Type-C charging cable
• User manual/documentation

First Use

Follow these steps for initial setup:

Inserting and Returning Earbuds

Place the earbuds into the charging case slots; the magnets will attach them automatically.

Diagram: Hand placing an earbud into the charging case, followed by an image of earbuds magnetically secured within the case, marked with a checkmark ✔️.

Wearing

Gently rotate the ear hook downwards along the outside of your ear to adjust for the best fit.

Diagram: Illustrates placing an earbud into the ear and rotating the hook for a secure fit, with L and R indicators for left and right earbuds.

Charging

Place the earbuds into the charging case. Connect the charging case to a power source using the USB Type-C cable. Indicators will show charging status (e.g., ⚡ symbol).

Diagram: Shows earbuds being inserted into the charging case with battery indicators, and the case connected to a power source via USB.

Powering On/Off

Power On: Open the charging case.

Power Off: Close the charging case.

Diagram: Shows opening the case to power on (indicated by a power symbol [power-symbol]) and closing the case to power off.

Pairing

During pairing, the white indicator light on the earbuds flashes slowly. After successful pairing, the light stays solid white for 5 seconds before turning off. If no device is paired within 1 minute, the indicator turns off.

Diagram: Shows earbuds in an open case, a smartphone screen displaying Bluetooth settings with 'Xiaomi OpenWear Stereo' available, and a connected earbud with a checkmark ✔️.

Connecting to Two Devices

Keep both earbuds in the case. Press and hold the button for 2 seconds until the white light flashes slowly to enter pairing mode. You can then connect to a second device.

Note: Dual connection is disabled by default. To use it, enable this function in the Xiaomi Earbuds app.

Diagram: Sequence showing holding the button in the case, followed by smartphone screens showing Bluetooth connection status for two devices.

Disconnecting Connection

• Connection Loss: Occurs when earbuds are more than 10 meters (> 10m) away from the device.
• Interruption due to Interference: Caused by many wireless devices or strong environmental interference in the vicinity.
• Manual Disconnection: Place both earbuds into the case and close the lid, or manually turn off Bluetooth on your device.

Automatic Reconnection: The earbuds will automatically reconnect to the last paired device when taken out of the case.

Diagram: Shows earbuds in case, then a smartphone screen indicating automatic reconnection via Bluetooth.

Factory Reset

Press and hold the button for 10 seconds until the orange light blinks three times. Gestures can be customized via the Xiaomi Earbuds app.

Diagram: Shows pressing and holding a button on the case for 10 seconds, with an indicator light blinking orange.

Function Overview

Music Controls:

• Double tap: Play/Pause

Phone Controls:

• Double tap: Answer/End call
• Triple tap: Reject call

Diagram: Icons representing music playback (play/pause) and phone calls (answer/end, reject) with corresponding tap counts (x2, x3).

Connecting with App

1. Scan the QR code to download and install the Xiaomi Earbuds app for additional features.
2. Follow the in-app instructions to connect your earbuds.

Note: Ensure Bluetooth is enabled on your smartphone during the connection process. Place the earbuds in the charging case, open the lid, and ensure your smartphone is nearby.

Compatibility: The Xiaomi Earbuds app supports mobile phones with Android 6.0 and later, and iOS 14.0 and later. Please update the app to the latest version.

Specifications

Important Notes

Bluetooth Signal: In dense environments with 2.4 GHz electromagnetic interference, occasional disconnections or audio loss may occur.

Charger Power: The supplied charger power should be between a minimum of [2.5] watts and a maximum of [5] watts for optimal charging speed.

WEEE Information: Products marked with this symbol [WEEE-symbol] are electronic waste and should not be disposed of with general household waste. Protect the environment by returning them to designated collection points for electronic waste recycling. Proper disposal prevents negative environmental and health impacts.

CE Mark: The CE mark applies to the product and its built-in battery.

EU Declaration of Conformity: Xiaomi Communications Co., Ltd. declares that the radio equipment type M2319E1 complies with Directive 2014/53/EU and Regulation (EU) 2023/1542. The full text of the EU declaration of conformity is available at: https://www.mi.com/global/service/support/declaration.html

Important Safety Information

Read the following instructions to ensure optimal performance and avoid hazardous use:

• Product information and certification marks are located in the charging case.
• To prevent hearing loss, do not use the product at high volumes for extended periods.
• Do not use earbuds while driving; comply with local regulations.
• Use only power adapters that meet local safety standards or are certified by qualified manufacturers.
• Do not disassemble, strike, crush, or incinerate the product, as this may cause an explosion.
• The product contains a built-in battery that cannot be removed or replaced by the user. Do not attempt to disassemble or modify the battery. Replacement must be done by an authorized service provider with the same type of battery. Incorrect battery replacement may compromise safety features (e.g., fire, explosion, corrosive electrolyte leakage). Do not dispose of batteries in household waste. Follow local laws for battery disposal.
• Disposing of a battery in fire, a hot oven, or mechanically crushing or cutting it may result in an explosion.
• Do not use the product during thunderstorms, as this may cause malfunction and increase the risk of electric shock.
• Leaving the battery in environments with extremely high temperatures may cause an explosion or leakage of flammable liquid or gas.
• Exposure of the battery to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas.
• This product is not a toy and contains small parts. Keep it out of reach of children to prevent choking or other injuries from accidental ingestion.
• If skin irritation occurs, discontinue use and seek medical attention.
• Using this product may impair your awareness of environmental warning sounds. Ensure your surroundings are safe when using the product.
• The symbol " [DC-symbol] " indicates direct current voltage.

Bluetooth® Trademark: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.

Warranty Notice

As a Xiaomi consumer, you are entitled to additional warranties under certain conditions. Xiaomi offers specific consumer warranty benefits that supplement, and do not replace, any statutory warranties provided by your national consumer protection laws. The duration and terms related to statutory warranties are stipulated by applicable local laws. For more information on consumer warranty benefits, visit the official Xiaomi website: https://www.mi.com/global/support/warranty. Except where prohibited by law or otherwise promised by Xiaomi, after-sales services shall be limited to the country or region of original purchase. Under the consumer warranty, to the maximum extent permitted by law, Xiaomi will, at its discretion, repair, replace, or refund the purchase price of your product. Normal wear and tear, force majeure, misuse, or damage caused by negligence or user error are not covered by the warranty. The contact person for after-sales service may be anyone in Xiaomi's authorized service network, authorized Xiaomi distributors, or the end retailer who sold you the product. If in doubt, please contact the appropriate person that Xiaomi can identify.

Disclaimer and Manufacturer Information

Products not properly imported and/or manufactured by Xiaomi and/or not properly purchased from Xiaomi or an official Xiaomi dealer are not covered by these warranties. Under applicable laws, you may be entitled to warranties from the unofficial dealer who sold the product. Xiaomi therefore urges you to contact the dealer from whom you purchased the product.

Illustrations: Product illustrations, accessories, user interfaces, and other elements in this user manual are schematic diagrams intended for reference only and may differ slightly from the actual product. This manual is published by Xiaomi or a company in the Xiaomi ecosystem. Typographical errors and inaccurate information in this manual or related programs and/or devices may be changed without prior notice. Such changes will be reflected in the latest version of the manual.

Manufacturer: Xiaomi Communications Co., Ltd.
Address: #019, 9th Floor, Building 6, Xi'erqi Middle Road 33, Haidian District, Beijing, China, 100085

Authorized Representative for the United Kingdom:
Name: Xiaomi Technology UK Limited
Address: Davidson House, Forbury Square, Reading, Berkshire RG1 3EU

Authorized Representative for the EU:
Name: Xiaomi Technology Netherlands B.V.
Address: Prinses Beatrixlaan 582, 2595BM, The Hague, Netherlands

Email: contact@support.mi.com