Xiaomi OpenWear Stereo Pro Wireless Earphones

Product Overview

Read this quick start guide carefully before using the product and keep it for future reference.

An illustration shows the wireless earphones in their charging case. The case is open, revealing the earbuds. Icons indicate charging (⚡), light (?), and power (?). A separate illustration shows a single earphone with the Xiaomi logo and microphone icons.

Package Contents

The package contents are shown: a box, the charging case, two earbuds, a USB charging cable, and a user manual.

First Use

For first use, remove the earphones, peel off the protective film, place them back into the charging case, and close the lid. When you open the charging case again, the earphones will automatically enter Bluetooth pairing mode.

Sequence of images showing: 1. Earphones in the open case. 2. Removing a protective film from an earphone. 3. Closing the charging case.

Placement and Securing

Place the earphones into the charging case slots in the correct orientation. Magnets will automatically secure them.

Images show earphones being placed into the charging case slots, indicating correct orientation. A checkmark (✔️) indicates successful placement.

Wearing

Gently rotate the tip of the ear hook downwards along the outer part of your ear to ensure a secure and comfortable fit.

Illustrations show the 'L' and 'R' marked earphones. A sequence shows how to insert and gently twist the earphone into the ear for a secure fit.

Charging

To charge the earphones: Place the earphones into the charging case. Charging will start automatically after closing the lid (the charging case's battery level must be above 5%).

Images show: 1. Earphones being placed into the charging case. 2. The charging case with earphones inside, showing a charging indicator (?). 3. The closed charging case with a charging cable connected, indicating charging status.

To charge the charging case: Use a Type-C cable. The indicator light turns green when charging is complete.

Powering On

When you open the charging case, the earphones will automatically turn on.

An illustration shows the charging case opening, with the earphones inside. A power icon (?) is shown.

Sleep Mode

Place the earphones into the charging case and close the lid. The earphones will automatically disconnect and enter sleep mode.

Images show: 1. Earphones being placed into the charging case. 2. The charging case being closed, with a sleep icon (?) indicating the earphones are entering sleep mode.

Connect and Pair

1. Open the charging case lid. Press and hold the function button for 2 seconds; the light will flash, and the earbuds will enter pairing mode. 2. Enable Bluetooth on your device, find the earbuds in the menu, and connect.

Note: For daily use, opening the charging case lid allows the earphones to automatically reconnect to the last paired Bluetooth device. (The Bluetooth device must be within the earphones' connection range.)

Sequence of images: 1. Earphones in the open case. 2. A smartphone screen showing Bluetooth settings with 'Available equipment' and 'Xiaomi OpenWear Stereo Pro' listed, indicating pairing. 3. A single earphone with a checkmark (✔️).

Dual Device Connection

After connecting the earphones to the first device, place them in the charging case and leave the lid open. Press and hold the function button for 2 seconds. If the indicator light flashes white, the earphones are ready to pair with a second device.

Note: Dual device connection is enabled by default.

Two sequences of images showing the process. First sequence: earphones in case, opening lid, pressing button, phone showing pairing. Second sequence: similar process, indicating readiness for a second device.

Factory Reset

Open the case, press and hold the function button for 10 seconds. Release when the indicator light flashes orange three times and then starts flashing white. The earphones will reset to factory settings and enter pairing mode again.

Illustration shows the case open, the function button being pressed for 10 seconds (10S), and the indicator light sequence (orange, then white).

Interactive Operations

Double Tap: Music: Play/Pause. Call: Answer/End.

Press and Hold: Incoming Call: Reject by pressing and holding.

Note: More interaction options can be viewed and customized in the gesture settings on your Xiaomi phone or in the Xiaomi Earbuds app.

Icons representing double tap (X2) with music play/pause symbols. Icon representing press and hold with a call symbol.

App Connection

1. Scan the QR code to download and install the Xiaomi Earbuds app to enable more features. 2. Follow the instructions in the app to connect the earphones.

Note: During the connection process, ensure your smartphone's Bluetooth is enabled. Place the earphones in the charging case, open the lid, and ensure your smartphone is near the case.

*The Xiaomi Earbuds app supports Android 6.0 and above, and iOS 14.0 and above operating systems.

*Please update the app to the latest version.

A QR code is shown.

Technical Specifications

Note: Due to Bluetooth signal characteristics, connection interruptions or audio loss may occasionally occur in environments with high 2.4 GHz electromagnetic signal interference.

WEEE Information

This symbol (♻️) indicates that this product is waste electrical and electronic equipment (WEEE) and should not be disposed of with unsorted household waste. Instead, hand over your waste equipment to a designated collection point for recycling. Proper disposal helps protect human health and the environment.

EU Declaration of Conformity

Manufacturer: Xiaomi Communications Co., Ltd. Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085. This declaration confirms that the product (Model: M2503E1) complies with Directive 2014/53/EU and Regulation (EU) 2023/1542. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html

The CE mark applies to the product and its internal battery.

Important Safety Information

Read the following precautions to ensure optimal performance and avoid hazardous use or unauthorized operations.

• Product information and certification marks are located inside the charging case and on the earphones.
• Do not use earphones while driving and comply with local regulations.
• Use only certified power adapters compliant with local safety standards.
• Do not disassemble, puncture, crush, or expose the product to fire, as it may explode.
• The product has a built-in battery that cannot be removed or replaced. To prevent damage, do not attempt to remove or replace the battery yourself. Only authorized service providers should replace the battery with the same type. Incorrect battery replacement can cause damage (fire, explosion, corrosive electrolyte leakage, etc.). Do not dispose of batteries in household trash bins. Dispose of batteries according to local laws and regulations.
• Do not use the product during thunderstorms, as this may cause malfunction and increase the risk of electric shock.
• Exposure to high temperatures or fire may cause explosion or leakage of flammable liquids or gases.
• Exposure to low air pressure may cause explosion or leakage of flammable liquids or gases.
• Keep earphones and accessories, which may contain small parts, out of reach of children.
• If redness or swelling occurs on skin contact, discontinue use and seek medical attention.
• Your ability to perceive external danger warnings may be reduced when listening to audio. Ensure your surroundings are safe during use.

The symbol (⚡) indicates DC voltage. To prevent possible hearing loss, do not use this product at high volume for long periods.

Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. Xiaomi Inc.'s use of these marks is under license. Other trademarks and trade names belong to their respective owners.

Warranty Statement

As a Xiaomi consumer, you are entitled to additional guarantees under certain conditions. Xiaomi provides these consumer guarantees in addition to, not instead of, the legal guarantees provided by your national consumer laws. The duration and conditions for legal guarantees are provided by local laws.

For more information on consumer warranty benefits, please visit Xiaomi's official website: https://www.mi.com/global/support/warranty. Except where prohibited by law or where Xiaomi makes different promises, after-sales service is limited to the country or region of original purchase. Within the scope of consumer warranty and as permitted by law, Xiaomi may, at its discretion, repair, replace, or refund your product. Normal wear and tear, force majeure, user negligence, or damage due to misuse are not covered. The contact person for after-sales service may be any authorized Xiaomi service agent, authorized distributor, or the retailer from whom you purchased the product. If unsure, please contact the relevant person designated by Xiaomi.

Products not imported or manufactured by Xiaomi, or not purchased from an authorized Xiaomi retailer, are not covered by these guarantees. According to applicable laws, you may benefit from guarantees offered by unofficial retailers who sold the product. Therefore, Xiaomi invites you to contact the seller from whom you purchased the product.

Unauthorized recording, without the consent of the other party, may be a criminal and legal offense. Recordings are not permitted for commercial use and must comply with local laws and regulations, including privacy rights. Xiaomi is not responsible for violations of law resulting from your actions.

Disclaimer: The images of the product, accessories, user interfaces, and other elements in this user manual are schematic diagrams for reference purposes only and may differ slightly from the actual product. This manual is published by Xiaomi or an entity within the Xiaomi ecosystem. Typographical errors and incorrect information in this manual or related programs/equipment may be changed without prior notice. Such changes will be indicated in the latest version of the manual.

Manufacturer: Xiaomi Communications Co., Ltd. Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085. For more information, please visit www.mi.com. Quick Start Guide Version: V1.0

Warranty Terms

1. The warranty period starts from the date of product delivery and lasts for 2 years (this period cannot be less than 2 years).

2. The entire product, including all its parts, is covered by the warranty.

3. If the product is found to be defective, the consumer may exercise one of the rights stipulated in Article 11 of Law No. 6502 on Consumer Protection:

• a- Withdrawal from the contract,
• b- Requesting a price reduction,
• c- Requesting free repair,
• ç- Requesting replacement with an identical product without defect.

4. If the consumer chooses the right to free repair, the seller is obliged to repair or have the product repaired without charging any fees for labor, replacement parts, or any other costs. The consumer can also exercise their right to free repair against the manufacturer or importer. The seller, manufacturer, and importer are jointly liable for the consumer exercising this right.

5. If the product malfunctions again within the warranty period, if the maximum repair time is exceeded, or if the repair is deemed impossible by a report from the authorized service station, seller, manufacturer, or importer, the consumer may request a refund, a price reduction proportional to the defect, or, if possible, replacement with an identical defect-free product from the seller. The seller cannot refuse the consumer's request. In case of non-compliance with this request, the seller, manufacturer, and importer are jointly liable.

6. The repair time for the product begins from the date the defect is reported to the authorized service station or seller within the warranty period, or from the date the product is delivered to the authorized service station outside the warranty period. If the product defect is not resolved within 10 business days, the manufacturer or importer must provide the consumer with a similar product for use until the repair is completed. If the product malfunctions within the warranty period, the repair time is added to the warranty period.

7. Defects arising from the use of the product contrary to the instructions in the user manual are not covered by the warranty.

8. In case of disputes arising from the exercise of warranty rights, the consumer may apply to the Consumer Arbitration Committee or the Consumer Court in their place of residence or the place where the consumer transaction was made.

9. If the seller fails to provide this Warranty Certificate, the consumer may apply to the General Directorate of Consumer Protection and Market Surveillance of the Ministry of Trade.