Xiaomi OpenWear Stereo

Product Overview

Before using, please read this user manual carefully and keep it for future reference.

Diagram showing the charging case and two earbuds. Callouts indicate a power button (?), a light bulb icon (?), a charging port (⚡), and microphone icons (?️) on the earbuds.

Package Contents

Diagram illustrating the package contents: a closed charging case, two wireless earbuds, a USB charging cable, and a user manual.

First Use

Diagram sequence for first use: 1. Earbuds in an open charging case. 2. A hand removing a protective film from an earbud. 3. Earbuds placed in the charging case, which is then closed.

For first use, remove the protective film, then place the earbuds into the charging case and close it. To use the earbuds, open the case again.

Removing and Inserting Earbuds

Diagram sequence for inserting earbuds: 1. A hand removing earbuds from the charging case. 2. Earbuds being placed into their respective slots in the charging case. 3. A checkmark indicating correct magnetic attachment.

Insert the earbuds into the charging case slots; they will attach automatically with magnets.

Wearing

Diagram illustrating how to wear the earbuds: L and R indicators are shown. The earbud is inserted and gently twisted downwards along the outer ear for a secure fit.

Gently twist the end of the earbud downwards along the outside of your ear to ensure the best fit.

Charging

Diagrams showing the charging process: 1. The wireless earbuds. 2. Earbuds placed in the charging case, with an indicator showing charging status (⚡). 3. A USB cable connected to the charging case.

Powering On / Powering Off

Diagrams for powering on and off: 1. Powering on by opening the charging case (? icon). 2. Powering off by placing earbuds into the charging case and closing it (zzz icon).

Connecting

Diagram sequence for connecting: 1. Earbuds removed from the case. 2. A smartphone screen displaying Bluetooth settings, with 'Xiaomi OpenWear Stereo' selected and connected (? icon).

During pairing, the white lights flash slowly; after successful pairing, the white lights stay on for 5 seconds and then turn off; if the device is not paired for 1 minute, the indicator lights will turn off.

Connecting to Two Devices

Diagram sequence for connecting to two devices: 1. Earbuds in the charging case. 2. Smartphone Bluetooth settings screen. 3. Earbuds in the charging case with a 2-second timer and indicator light, signifying pairing mode for a second device.

Leave both wireless earbuds in the case and press and hold for 2 seconds until the white light flashes slowly and enters pairing mode, then you can connect to the second device. Note: Connecting to two devices is disabled by default. If you need to use this function, please enable it in the Xiaomi Earbuds app.

Disconnecting Connection

Connection Loss: Earbuds are more than 10 meters away from the device.

Connection Interruption: Many wireless devices nearby, strong environmental interference.

Manual Disconnection: Place both earbuds into the case and close it, or manually turn off Bluetooth on the device.

Diagrams illustrating disconnection and reconnection: 1. Bluetooth icon with '> 10m' indicating range limit. 2. Earbuds in the charging case, and a smartphone screen showing Bluetooth settings. 3. A checkmark indicating automatic reconnection.

Automatic Reconnection

Factory Reset

Diagram for factory reset: Earbuds in the charging case with a 10-second timer and an orange indicator light.

Press and hold for 10 seconds until the orange indicator flashes three times. Note: Gesture settings can be customized in the Xiaomi Earbuds app.

Function Overview

Diagrams show touch controls for music playback and call management.

• Music
• Double Tap: Play/Pause
• Telephoning
• Double Tap: Answer/End Call
• Triple Tap: Reject Call

Connecting to the App

Diagram showing a QR code for app download. Specifications are presented in a table.

1. Scan the QR code, download and install the Xiaomi Earbuds app to activate more functions.

2. Follow the instructions in the app to connect the earbuds.

Note: During the connection process, ensure Bluetooth is active on your smartphone. Place the earbuds back into the charging case, open the lid, and ensure your smartphone is close to the case.

*Xiaomi Earbuds app supports mobile phones with Android 6.0 and above, and iOS 14.0 and above.

*Please update the app to the latest version.

Specifications

Notes and Compliance

Note: Due to Bluetooth signal characteristics, occasional connection interruptions or sound loss may occur in densely populated areas with 2.4 GHz electromagnetic signal interference.

The power supplied by the charger should be between a minimum of 4.4 watts, as required by the radio equipment, and a maximum of 5 watts to achieve maximum charging speed.

Information on Disposal and Recycling (WEEE)

Diagram showing the WEEE symbol (♻️) for recycling.

All products marked with this symbol are waste electrical and electronic equipment, which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your equipment at a designated collection point for recycling waste electrical and electronic equipment, as stipulated by the government or local authorities. Proper disposal and recycling will help prevent potential negative impacts on the environment and human health. For more information about the location and terms of these collection points, please inquire with the installation technician or local authorities.

CE Marking is present.

Xiaomi Communications Co., Ltd. hereby declares that the radio equipment type M2319E1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

Precautions

Before using and operating this device, please read the following precautions carefully to ensure optimal device function and to prevent dangerous use or unauthorized operations.

• Product information and certification marks are located on the charging case.
• To prevent possible hearing damage (⚠️), do not use this product at high volume for extended periods.
• Do not use wireless earbuds while driving and comply with relevant regulations in your area or country.
• Use only charging adapters that comply with local safety standards or are certified and supplied by qualified manufacturers.
• Do not disassemble, strike, crush, or throw the product into fire, as it may explode.
• This product contains a built-in battery that cannot be removed or replaced. To avoid damage to the battery or product, do not attempt to remove or modify the battery yourself. The battery can only be replaced by authorized service centers and must be replaced with the same type. Using a different battery type may disable protective measures (such as fire, explosion, and corrosive electrolyte leakage). Do not dispose of the battery in waste intended for landfills. Comply with local laws and regulations when disposing of the battery.
• Throwing the battery into fire or a heated oven, or mechanically damaging or cutting the battery, which could lead to an explosion.
• Do not use this product during thunderstorms. Thunderstorms can cause product malfunctions and increase the risk of electric shock.
• Leaving the battery in an environment with extremely high temperatures may lead to explosion or leakage of flammable liquid or gas.
• The battery exposed to extremely low air pressure may lead to explosion or leakage of flammable liquid or gas.
• These wireless earbuds and their accessories may contain small parts. Keep them out of reach of children.
• Stop using the product immediately and seek medical attention if signs of redness or swelling appear at the point of skin contact.
• Enabling noise cancellation may affect your perception of surrounding sounds and warnings. Before using this function, ensure you are in a safe environment.
• = Symbol indicates direct current voltage.

Bluetooth® and the related logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of these trademarks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.

Warranty Notice

As a Xiaomi product user, you are entitled to additional warranties under certain conditions. Xiaomi offers specific consumer warranties as a supplement to the statutory warranties provided by consumer protection law in your country, not in lieu of these warranties. The validity period and conditions for statutory warranties are stated in the relevant local laws.

For more information on consumer warranty benefits, please visit Xiaomi's official website at https://www.mi.com/global/support/warranty. Except where prohibited by law or otherwise promised by Xiaomi, after-sales services are limited to the country or region of original purchase. Within the scope of consumer warranty and to the maximum extent permitted by law, Xiaomi will, at its discretion, repair or replace your product, or refund the amount paid for it. Normal wear and tear, force majeure, misuse, or damage caused by negligence or user error are not covered by the warranty. The contact person for after-sales service may be any person in Xiaomi's authorized service network, authorized Xiaomi distributors, or the retailer who sold you the products. In case of doubt, contact the relevant person designated by Xiaomi.

Current warranties do not apply to Hong Kong and Taiwan.

Products that have not been duly imported and/or manufactured by Xiaomi and/or duly procured from Xiaomi or an official Xiaomi product retailer are not covered by existing warranties. Under applicable laws, you may obtain warranties from the unofficial retailer who sold the product. Xiaomi therefore urges you to contact the retailer from whom you purchased the product.

Disclaimer

Product illustrations, accessories, user interfaces, and other elements in the user manual are schematic diagrams only and may differ slightly from the actual product. This manual is published by Xiaomi or a company within the Xiaomi ecosystem. Typographical errors and inaccurate information in this manual or related software and/or devices are subject to change without prior notice. Such changes will be indicated in the latest version of the manual.

Manufacturer: Xiaomi Communications Co., Ltd.

Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

More information can be found on the website www.mi.com.

User Manual Version: V1.0

Interference Statement

If this device causes harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician.

ISED Declaration of Conformity

This device contains license-exempt transmitter(s)/receiver(s) that comply with Industry Canada's license-exempt RSS standard(s) for innovation, science and economic development. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

RF Exposure Compliance

This device complies with FCC/ISED limits for RF exposure set forth for an uncontrolled environment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device should be installed and operated with a minimum distance of 0 mm between the radiator and your head. The portable device is designed to meet the requirements for RF exposure set by FCC/ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard for product certification for use when properly worn on the head with 0 mm separation.

FCC ID: 2AFZZM2319E1

IC: 25903-M2319E1

CAN ICES-003(B)/NMB-003(B)

Importer: AT Computers a.s. Těšínská 1970/56, Slezská Ostrava, 710 00 Ostrava IČO: 61672599