LED Table Lamp
[Instruction Manual]
A stylized, modern LED table lamp with a curved, ribbon-like design, mounted on a circular base.
Please pay attention to the warning signs. Read the instructions with caution before operating and keep it properly.
CAUTION
- Before assembly, place all parts out on a clean flat surface and inspect each part for defects that may have occurred during shipping.
- Inspect wire insulation for any cuts, abrasions or exposed copper that may have resulted during shipping. If there are any defects in the wire, DO NOT continue to assemble. Please send an email to our Customer Service immediately.
- Consult a qualified electrician if you have any electrical questions.
- Never drape clothes over the lamp.
- To reduce the likelihood of tipping over, we recommend not placing the lamp at the edge of a table and keeping children and pets away.
- To prevent children from suffocating and choking, keep them away from packing materials.
- Please keep this manual and hand it over when you transfer the product.
Packing List
Part | Description | Quantity |
---|---|---|
1 | Light Frame | 1 |
2 | Base | 1 |
3 | Instruction Manual | 1 |
4 | Screw | 2 |
5 | Screwdriver | 1 |
The packing list diagram shows five items: 1. Light Frame (a coiled, ribbon-like structure), 2. Base (a circular disc), 3. Instruction Manual (a booklet), 4. Screws (two small fasteners), and 5. Screwdriver (a tool).
ASSEMBLY INSTRUCTIONS
The assembly diagram illustrates connecting the Light Frame (1) to the Base (2) using the Screws (3). An arrow indicates the direction of insertion and tightening.
Install the Light Frame (1) to the base (2) until tight through screws (3).
FUNCTIONS
- Touch Switch: The lamp features a touch-sensitive control. [Touch Switch Indicator]
- Three Color Temperatures: Supports 3000K (warm white), 4500K (neutral white), and 6000K (cool white).
- Stepless Dimmable: Brightness can be adjusted smoothly.
- Operation:
- Short press the touch switch to turn the light ON.
- Short press again to cycle through color temperatures (3000K/4500K/6000K).
- Short press a third time to turn the light OFF.
- Touch and hold the switch to adjust brightness (increase or decrease). Release when the desired brightness is reached.
Specifications
- Product Height: 16.7 inches
- Base Diameter: 5.3 inches
- Wire Length: 70.8 inches
- Materials: Aluminum, Iron, PVC
- Input Voltage: 100-240VAC 60Hz
- Power: 12W
- Lumen: 500LM
One Year Limited Warranty
This product is supported by a One Year Warranty for materials and workmanship from the purchase date. The warranty does not cover damage caused by personal misuse or improper installation.
To receive assistance, please provide your Order ID and Name to the customer service team.