Cabinet

Version: 15/09/2023

? Assembled by 2 Adults

Introduction & Safety Information

? IMPORTANT INFORMATION! Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

⚠️ AVOID SCRATCHES! In order to avoid scratching, this furniture should be assembled on a soft layer, such as a rug.

? IMPROVE EFFICIENCY! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

? ANTI-TOPPLE WARNING! Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

❗ IMPORTANT! It is important that any product which is assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months to assure stability throughout the lifespan of the product. For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.

Tools and Hardware

Please prepare the following tools:

? [Tape Measure] ? [Phillips Screwdriver] ? [Flathead Screwdriver] ? [Hammer] ? [Wrench] ? [Cutting Tool - implied]

When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size.

Part	Quantity	Description
A	x 4	Cam Bolt, 6 x 33.5 mm
B	x 15+1	Lock, 15 x 10 mm
C	x 6	Dowel, M6 x 30 mm
D	x 30+1	Screw, M4 x 40 mm
E	x 4	Dowel, M6 x 50 mm
F	x 16+1	Screw, 3 x 12 mm
G	x 2	Drawer Slide (pair)
I	x 4	Screw, M4 x 16 mm
J	x 2	Handle
K	x 8	Hook
L	x 46+1	Screw, 3 x 10 mm
M	x 2	Screw, M4 x 16 mm
N	x 2	Metal Bracket (for anti-tip)
O	x 2	Wall Plug
P	x 4	Screw, 6 x 30 mm
Q	x 16+1	Sticker

Assembly Steps

⚠️ WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:

ALWAYS install tipover restraint provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
NEVER open more than one drawer at a time.
Place heaviest items in the lowest drawers.

This is a permanent label. Do not remove!

Step 1: Connect Panels

Using screw (D) to connect panel #4 with panel #2 and #3 as shown.

Diagram shows panels labeled 2, 3, and 4. Screw (D) is indicated for joining these panels.

Step 2: Connect Panels

Using screw (D) and dowel (C) to connect panel #1 with panel #2 and #3 as shown.

Diagram shows panels labeled 1, 2, and 3. Screw (D) and dowel (C) are indicated for joining these panels.

Step 3: Insert Cam Bolts

Insert cam bolt (A) into panel #5 as shown.

Diagram shows panel labeled 5. Cam bolts (A) are shown being inserted into pre-drilled holes.

Step 4: Connect Panels

Using screw (D) and dowel (E) to connect panel #5 with panel #2 and #3 as shown.

Diagram shows panels labeled 2, 3, and 5. Screw (D) and dowel (E) are indicated for joining these panels.

Step 5: Attach Drawer Slides

Using screw (F) to lock the slide (G) to panel #7 as shown.

Diagram shows panel labeled 7. Drawer slides (G) are shown being attached using screws (F).

Step 6: Attach Drawer Slides

Using screw (F) to lock the slide (G) to panel #8 as shown.

Diagram shows panel labeled 8. Drawer slides (G) are shown being attached using screws (F).

Step 7: Connect Panels

Using screw (D) to connect panel #9 with panel #7 and #8 as shown.

Diagram shows panels labeled 7, 8, and 9. Screw (D) is indicated for joining these panels.

Step 8: Connect Panels and Insert Locks

Connect panel #5 with panel #7 and #8, and insert the lock (B) into panel #7 and #8 as shown.

Diagram shows panels labeled 5, 7, and 8. Locks (B) are shown being inserted into designated holes.

Step 9: Connect Panels

Using screw (L) to connect panel #6 and #21 to the cabinet as shown.

Diagram shows panels labeled 6 and 21. Screw (L) is indicated for attaching these panels to the main cabinet structure.

Step 10: Slide and Connect Panels

Slide panel #11 to connect panel #10. Using screw (L) to connect panel #10 to the cabinet as shown.

Diagram shows panels labeled 10 and 11. Panel 11 is shown sliding into place, and screw (L) is used to secure panel 10.

Step 11: Connect Panels

Using screw (D) to connect panel #13 and #14 with panel #15 as shown.

Diagram shows panels labeled 13, 14, and 15. Screw (D) is indicated for joining these panels.

Step 12: Insert Bolts and Attach Handle

Insert bolt (A) into panel #12. Using screw (I) to lock the handle (J) to panel #12 as shown.

Diagram shows panel labeled 12. Bolts (A) are inserted, and handle (J) is attached using screws (I).

Step 13: Connect Panels and Insert Locks

Using dowel (C) to connect panel #12 with panel #13, #14, and #15, and insert the lock (B) to panel #13 and #14 as shown.

Diagram shows panels labeled 12, 13, 14, and 15. Dowels (C) are used for connection, and locks (B) are inserted into panels 13 and 14.

Step 14: Attach Drawer Slides

Using screw (F) to lock the slide to panel #13 and #14 as shown.

Diagram shows panels labeled 13 and 14. Drawer slides are shown being attached using screws (F).

Step 15: Insert Drawer

Put the drawer into the cabinet as shown.

Diagram shows the assembled drawer unit being inserted into the main cabinet structure.

Step 16: Connect Panels

Using screw (P) to connect panel #19 with panel #17 and #18 as shown.

Diagram shows panels labeled 17, 18, and 19. Screw (P) is indicated for joining these panels.

Step 17: Insert Bolts and Attach Handle

Insert bolt (A) into panel #16. Using screw (I) to lock the handle (J) to panel #16 as shown.

Diagram shows panel labeled 16. Bolts (A) are inserted, and handle (J) is attached using screws (I).

Step 18: Connect Panels and Insert Locks

Connect panel #19 with panel #17 and #18. Connect panel #16 with panel #17 and #18, and insert the lock (B) to panel #17 and #18 as shown.

Diagram shows panels labeled 16, 17, 18, and 19. Locks (B) are shown being inserted into panels 17 and 18.

Step 19: Attach Drawer Slides

Using screw (F) to lock the slide to panel #17 and #18 as shown.

Diagram shows panels labeled 17 and 18. Drawer slides are shown being attached using screws (F).

Step 20: Attach Hooks and Insert Drawer

Put the metal hook (K) to panel #19 as shown. Put the drawer to the cabinet as shown.

Diagram shows hooks (K) being attached to panel 19, and the assembled drawer unit being placed into the cabinet.

Step 21: Insert Cloth Drawers

Put the cloth drawer (part 20) to the cabinet as shown.

Diagram shows cloth drawers (labeled 20) being placed into the cabinet.

Step 22: Install Anti-Tipping Device

Using screw (M) to lock the metal bracket (N) to the top panel #1 as shown. Drill holes on wall, knock part (O) into the holes. Install anti-tipping device as shown. Cover the hole with sticker (Q) as shown.

Diagram illustrates the process of attaching the anti-tipping hardware to the wall and the cabinet. It shows drilling into the wall, inserting wall plugs (O), securing brackets (N) with screws (M), and applying stickers (Q).

Warranty

WARRANTY CLAIMS

There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
The product must be used in accordance with the instructions provided. For health reasons.
For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

Failure to follow the furniture instructions will invalidate the warranty. Attention please.
Does not include damage during installation, but includes damage during transportation.

Scope of responsibility

Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
After using, the damage and scratches of the furniture are not covered by the warranty.

The Warranty Relates to All Bought in The Us and Covers The Following Areas

Sheet parts: 1 month from the date of purchase.
Electrical parts: 1 month from the date of purchase.

RETURNS

CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?

PLEASE FOLLOW THE BELOW INSTRUCTIONS:

If you have purchased and have simply changed your mind, follow the retailer's instructions for returns.

DEFECTIVE ITEMS

If your item is defective in any way, i.e. it doesn't work but you can't identify why, in the first instance, please call us.

DAMAGED ITEMS

If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.

AFTER-SALES CONTACT

? feedbackstation@163.com

? (303)800-6387

	N725P176330 Vanity Assembly Instructions Comprehensive guide to assembling the N725P176330 vanity, featuring a parts list, hardware list, and step-by-step instructions with detailed textual descriptions of diagrams.
	Comprehensive Assembly Instructions for Furniture: Bed, Nightstand, Dresser & Mirror Detailed assembly instructions, parts lists, hardware guides, and care advice for various furniture items including beds, nightstands, and dressers with mirrors. Includes pre-assembly tips and wall mounting instructions.
	Barn Doors Storage Cabinet - Stylish Home Organization Discover the Barn Doors Storage Cabinet, designed to help organize your home with its spacious interior, adjustable shelves, and convenient storage drawer. Features magnetic closures for easy access.
	Assembly Guide for Convertible Sofa Bed - Model AHOB1085 Detailed assembly instructions and user guide for the AHOB1085 convertible sofa bed. Learn how to assemble, adjust, and use your new furniture.
	Assembly Instructions for [Product Name] Detailed assembly instructions and return/damage claim information for the [Product Name]. Includes multilingual guidance and part identification.
	Assembly Instructions for SKU WF323346 Storage Cabinet Detailed assembly instructions for the SKU WF323346 storage cabinet, including a parts list, hardware list, and step-by-step guidance for assembly.
	Assembly Instructions for 176-5X Ladder Bookcase Step-by-step assembly guide for the 176-5X Ladder Bookcase, including a detailed parts list and hardware specifications.
	White Ladder Back Chair with Rattan Seat - Product Specifications Detailed dimensions and specifications for a white ladder back chair with a natural rattan seat. Includes overall height, width, depth, and seat dimensions, along with model number 12004WHT02ASU_CC_LD.