Coffee Table Installation Guide
Tools You Will Need
- Hexagon wrench
Before the Installation
- Do not throw away packing materials until assembly is complete, as small parts may come loose inside the carton during shipment. If parts are missing, please contact customer support.
- Assemble this item on a soft surface, such as carpet, to protect the finish.
- Proper assembly of this item requires 2 people.
- Periodically check to ensure that all connections are tight.
- It is recommended that installation of the product be done by a qualified licensed furniture assembler.
Care and Cleaning
- To protect the finish, avoid using chemicals and household cleaners.
- All hot serving dishes should be placed on a pad.
- Any liquid spilled onto the top should be cleaned up immediately with a damp cloth.
Parts List
| Part ID | Description | Quantity |
|---|---|---|
| 1 | Top Panel | 1 PC |
| 2 | Middle Ring | 1 PC |
| 3 | Legs (Vertical Supports) | 3 PCS |
| 4 | Lower Ring | 1 PC |
| 5 | Bottom Panel | 1 PC |
| 6 | Support Brackets (Angled) | 2 PCS |
| 7 | Central Support Bar | 1 PC |
| 8 | Base Ring | 1 PC |
| A | M6*12mm Bolts | 4 PCS |
| B | M6*30mm Bolts | 4 PCS |
| C | M6*40mm Bolts | 7 PCS |
| D | M6 Bolts (Threaded Posts) | 8 PCS |
| E | Hexagon Wrench (M4) | 1 PC |
| F | M6*10mm Bolts | 10 PCS |
Assembly Instructions
Step 1: Attach Lower Ring to Legs
Connect Part 4 (Lower Ring) to the three Part 3 (Legs) using three M6*40mm bolts (C). Note: Do not tighten the bolts during this step.
Step 2: Attach Middle Ring to Legs
Connect Part 2 (Middle Ring) to the three Part 3 (Legs) using six M6*10mm bolts (F). Note: Do not tighten the bolts during this step.
Step 3: Attach Top Panel
Attach Part 1 (Top Panel) to the assembled legs. Secure it using four M6*12mm bolts (A) and four M6 Bolts (D). Note: Do not tighten the bolts during this step.
Step 4: Tighten Base Structure Bolts
Tighten all bolts previously installed in Steps 1, 2, and 3 to secure the main base structure of the coffee table.
Step 5: Assemble Support Frame
Connect the two Part 6 (Support Brackets) to the Part 7 (Central Support Bar) using four M6*10mm bolts (F). Note: Do not tighten the bolts during this step.
Step 6: Attach Support Frame to Base Ring
Attach the assembled support frame (from Step 5) to Part 8 (Base Ring). Secure using four M6*40mm bolts (C) and four M6 Bolts (D). Note: Do not tighten the bolts during this step.
Step 7: Attach Bottom Panel
Attach Part 5 (Bottom Panel) to the structure using four M6*30mm bolts (B). Note: Do not tighten the bolts during this step.
Step 8: Final Tightening and Assembly Complete
Tighten all bolts installed in Steps 5, 6, and 7. The coffee table assembly is now complete.
