Assembly Instructions

Installation Steps

1. Screw the bulb (A) into the lamp holder.
2. Pass the wires through the connecting rod (C), screw the rod into the threaded tube on the lamp body (B), and screw the canopy (D) into the connecting rod.
3. Install the mounting plate (E) on the outlet box with the screws (F).
4. Loosen the hex nuts around the bolts (G) and screw in or unscrew the bolts from the junction box to get the right length for installation.
5. Connect the fixture wire to the circuit wire by wire nuts (H): black wire with live wire, white wire with neutral wire, ground wire with ground wire.
6. Fix the lamp body (D) to the mounting plate (E) with the ball nuts (J).

Please consult a qualified Electrician if you are not familiar with electrical wiring.

Diagram Overview

The diagram illustrates the assembly of the light fixture:

• Outlet Box: The electrical connection point in the ceiling.
• Wires: Ground Wire, Live Wire, and Neutral Wire emerge from the outlet box.
• Mounting Plate (E): Secured to the outlet box with screws (F).
• Connecting Rod (C): Passes through the outlet box and connects the fixture to the ceiling.
• Lamp Body (B): The main part of the fixture, housing the bulb.
• Canopy (D): Covers the wiring and mounting hardware.
• Wire Nuts (H): Used to securely connect the fixture's White Wire (to Neutral Wire) and Black Wire (to Live Wire), and the ground wire.
• Hex Nuts (G) and Ball Nuts (J): Components for adjusting and securing the fixture.
• Bulb (A): The light source, screwed into the lamp holder.

The diagram shows the flow of wires from the outlet box to the fixture, emphasizing the connections between live, neutral, and ground wires.