Häfele Routing Template

Section 1A: Basic Template Application

This section illustrates the fundamental use of the routing template. Position template [A] onto the wooden board [H]. Secure the template using screws [B]. The process involves pre-drilling (Vorfriesen) followed by fine routing (Feinfräsen) with a 27 mm / 14 mm router bit. The template features markings for different radii, including Radius 8 (R8) and Radius 20 (R20), along with precise hole positions. Key dimensions for this setup are 600 mm, 65 mm, and 150 mm.

The diagrams show template [A] being fixed to board [H] with screws [B], ready for routing operations. An indicator (often an eye icon ?️) suggests checking alignment from a specific angle.

Section 1B: Basic Template Application (Extended Lengths)

This section extends the basic application for longer wooden boards. Position template [A] onto the wooden board [H] and secure it with screws [B]. The process involves pre-drilling and fine routing using a 27 mm / 14 mm router bit. This configuration is suitable for board lengths ranging from over 600 mm up to 900 mm.

The diagrams depict the same procedure as Section 1A, adapted for longer workpieces.

Section 2A: Advanced Template Usage

This section details more advanced applications of the routing template. Place template [A] onto the wooden board [H] and secure it with screws [B]. The process includes pre-drilling and fine routing with a 27 mm / 14 mm router bit. The template is designed for precise placement using different radius settings (R8, R20) and specific hole patterns.

The diagrams illustrate the complete workflow:

1. Step 1-4: Position template [A] on board [H] and secure with screws [B]. Pre-drilling and fine routing are performed according to markings.
2. Step 5-7: Use a router with the appropriate bit to create precise grooves and holes as indicated by the template.

Section 2B: Advanced Template Usage (Extended Lengths)

This section covers advanced applications for longer wooden boards. Position template [A] onto the wooden board [H] and secure it with screws [B]. The procedure involves pre-drilling and fine routing with a 27 mm / 14 mm router bit, utilizing the template's radius settings (R8, R20) and hole patterns.

This configuration is suitable for board lengths ranging from over 600 mm up to 900 mm. The diagrams show the process similar to Section 2A, adapted for longer workpieces.

Section 3A: Template for Specific Hardware

This section details the use of the template for specific hardware installations. Place template [A] onto the wooden board [H] and secure it with screws [B]. The process involves pre-drilling and fine routing with a 27 mm / 14 mm router bit, following the template's markings for precise cuts.

The diagrams illustrate the steps from template placement and securing (steps 1-3) to using a router for creating grooves and holes (steps 4-6). Key dimensions are 600 mm, 65 mm, and 150 mm.

Section 3B: Template for Specific Hardware (Extended Lengths)

This section details the template usage for specific hardware installations on longer wooden boards. Position template [A] onto the wooden board [H] and secure it with screws [B]. The process involves pre-drilling and fine routing with a 27 mm / 14 mm router bit.

This configuration is suitable for board lengths ranging from over 600 mm up to 900 mm. The diagrams show the process similar to Section 3A, adapted for longer workpieces.

Section 4: Component Attachment

This section describes the attachment of various hardware components to the wooden boards. It utilizes components [C] (262.96.220, 150 mm), [D] (262.87.042, 154.5 mm), and [E] (262.96.835, 100 mm), along with tools such as wrenches SW 13 and SW 6.

The diagrams illustrate the step-by-step assembly process:

1. Attach component [C] using a SW 13 wrench.
2. Attach component [D] using a SW 6 wrench.
3. Attach component [E] using a SW 6 wrench.

Included Components

• Routing Template [A]
• Screws [B]
• Component [C] (Part No. 262.96.220, Length: 150 mm)
• Component [D] (Part No. 262.87.042, Length: 154.5 mm)
• Component [E] (Part No. 262.96.835, Length: 100 mm)
• Component [F] (Part No. 262.96.211, Length: 65 mm)
• Component [G] (Part No. 262.87.041, Length: 68.5 mm)

Note: Components [F] and [G] were listed on page 1 but not explicitly detailed in the assembly steps shown in the diagrams. They are included here for completeness based on the initial component list.

Tools Required

• Router with 27 mm / 14 mm bit
• Wrench SW 13
• Wrench SW 6