Bertazzoni MAS244IFEMXB Master Series Induction Range
24" - 4 Heating Zones - Electric Oven - Stainless Steel Finish
Dimensions
Side View
Overall Height: 42" (1066 mm)
Depth: 25 1/4" (640 mm)
Height to Worktop: 27 1/4" (692 mm)
Height to Oven Door Bottom: 16 3/4" (426 mm)
Leg Details
Leg height adjustment range: 3 5/8" - 5 1/8" (93-129 mm)
Front View
Width: 23 7/8" (605 mm)
Height: 32" (814 mm) or 32" + A (814 + A) with hood
Oven Door Height: 17 7/8" (454 mm)
Control Panel Height: 1 5/8" (40 mm)
Bottom Kick Plate Height: 6 3/4" (173 mm)
Receptacle Clearance: 5" (128 mm)
Worktop Details
Width: 25 1/4" (640 mm)
Depth: 23 7/8" (605 mm)
Heating Zone Diameter 1: 8 3/8" (213 mm)
Heating Zone Diameter 2: 7 5/8" (195 mm)
Heating Zone Diameter 3: 10 3/8" (265 mm)
Heating Zone Diameter 4: 21 7/8" (557 mm)
Distance from left edge to heating zone 1: 8 3/8" (213 mm)
Distance from left edge to heating zone 2: 15 3/8" (390 mm)
Distance from front edge to heating zone 1: 21 7/8" (557 mm)
Distance from front edge to heating zone 2: 15 3/8" (390 mm)
Distance from front edge to heating zone 3: 22" (558 mm)
Rear View
Depth: 25 1/4" (640 mm)
Height: 36" (915 mm) to cabinet
Depth from wall: 3" (75 mm)
Bottom clearance: 8 1/2" (214 mm)
Top clearance: 10 1/8" (258 mm)
Installation
Electrical Connection ?
A properly-grounded horizontally mounted electrical receptacle should be installed:
- No higher than 3" (7.6 cm) above the floor.
- No less than 2" (5 cm) from the left side (facing product).
- No more than 8" (20.3 cm) from the left side (facing product).
Check all local code requirements. ?️
For installation with a hood, refer to the manufacturer's installation requirements. ?
Cabinet dimensions for installation:
- Width: 24" (610 mm)
- Height: 36" (914 mm)
- Depth: 24" (610 mm)
- Clearance from rear wall: 4" (102 mm)
- Clearance from floor: 8" (203 mm)
- Space for electrical receptacle: 12" (305 mm) from left, 18" (457 mm) from floor.
Note
Disclaimer: While every effort has been made to ensure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change any part of the information at any time without notice. For detailed installation specifications consult the installation manual. Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of Bertazzoni Spa. ⚖️
Visit bertazzoni.com for more information.