REACH- and RoHS - Declaration
Sensirion AG
Laubisruetistrasse 50
8712 Staefa,
Switzerland
Compliance Statement
Sensirion AG declares that all Formaldehyde Sensors supplied by Sensirion AG comply with REACH and RoHS regulations.
Formaldehyde Sensors | REACH | RoHS |
---|---|---|
SFA3x | yes | yes |
SFA4x | yes | yes |
REACH Regulation Compliance
The EU regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals, REACH (Reg. 1907/2006 /EC) is adhered to, with the following limit values not exceeded:
- Substances of Very High Concerns (SVHC): 1000 ppm
- Exemption: 4-tert-butylphenol in the connector of the SFA3x: 1300 ppm
- Exemption: Octamethylcyclotetrasiloxane in the e-collar of the SFA4x: max. 1300 ppm
The information is based on data provided by suppliers. No attempt has been made to verify this information by third party analysis.
RoHS Regulation Compliance
The EU regulation on the Restriction of Hazardous Substances in electrical and electronic equipment, RoHS (Reg. 2011/65/EU and the delegated directive 2015/863/EU) is adhered to, with the following limit values not exceeded:
- Lead (Pb), Mercury (Hg), Hexavalent Chromium (CrVI): 1000 ppm
- Cadmium (Cd): 100 ppm
- Polybrominated biphenyls (PBB) and Polybrominated diphenyl ethers (PBDE): 1000 ppm
- Phthalates: DEHP, BBP, DBP and DIBP: 1000 ppm
- Resistors: Compliant with exception 7(c)-I of the directive 2011/65/EU.
Disclaimer
All information in this declaration is given to the best of our present knowledge and belief. The information given doesn't imply giving a warranty within the meaning of the warranty law.