Sensirion AG REACH and RoHS Declaration
Laubisruetistrasse 50
8712 Staefa,
Switzerland
REACH- and RoHS - Declaration
Sensirion AG declares that all sensors supplied comply with REACH and RoHS regulations.
Product Category | REACH | RoHS |
---|---|---|
Particulate Matter Sensor | SPS30: yes SPS6x: yes |
SPS30: yes SPS6x: yes |
Environmental Sensor Nodes | SEN4x: yes SEN5x: yes SEN6x: yes SEN5x: yes |
SEN4x: yes SEN5x: yes SEN6x: yes SEN5x: yes |
Cable Sets | Jumper Wire: yes |
EU Regulations Compliance
-
REACH (Reg. 1907/2006 /EC): Sensirion sensors comply with the Registration, Evaluation, Authorization and Restriction of Chemicals regulation. The following limit values are not exceeded:
- Substances of Very High Concerns (SVHC): 1000 ppm. Exemption: Parts of the fan may have more than 1000ppm 2-methyl-1-(4-methylthiophenyl)-2-morpholinopropan-1-one (CAS 71868-10-5).
The information is based on data provided by our suppliers. No attempt has been made to verify this information by third party analysis.
-
RoHS (Reg. 2011/65/EU and delegated directive 2015/863/EU): Sensirion sensors comply with the Restriction of Hazardous Substances in electrical and electronic equipment regulation. The following limit values are not exceeded:
- Lead (Pb), Mercury (Hg), Hexavalent Chromium (CrVI): 1000 ppm
- Cadmium (Cd): 100 ppm
- Polybrominated biphenyls (PBB) and Polybrominated diphenyl ethers (PBDE): 1000 ppm
- Phthalates: DEHP, BBP, DBP and DIBP: 1000 ppm
- Copper alloy in the fan and the plugs of the eval-kits: Compliant with exception 6c of 2011/65/EU.
Disclaimer
All information in this declaration is given to the best of our present knowledge and belief. The information given doesn't imply giving a warranty within the meaning of the warranty law.