Sensirion AG
Laubisruetistrasse 50
8712 Staefa,
Switzerland
RoHS, REACH and Hal-Free - Declaration
We declare that these Thermal Conductivity Sensors supplied by Sensirion AG comply with the following regulations:
Thermal Conductivity Sensor | REACH | RoHS | Halogen-Free |
---|---|---|---|
STC3x | yes | yes | yes |
STC4x | yes | yes | yes |
SEK-STC31-C | yes | yes | no |
SEK-STC42A | yes | yes | no |
EU Regulation on REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals)
According to REACH (Reg. 1907/2006/EC), the following limit values are not exceeded:
- Substances of Very High Concerns (SVHC): 1000 ppm
The information is based on data provided by our suppliers. No attempt has been made to verify this information by third party analysis.
EU Regulation on RoHS (Restriction of Hazardous Substances)
According to the EU regulation on the Restriction of Hazardous Substances in electrical and electronic equipment, RoHS (Reg. 2011/65/EU and the delegated directive 2015/863/EU), the following limit values are not exceeded:
- Lead (Pb), Mercury (Hg), Hexavalent Chromium (CrVI): 1000 ppm
- Cadmium (Cd): 100 ppm
- Polybrominated biphenyls (PBB) and Polybrominated diphenyl ethers (PBDE): 1000 ppm
- Phthalates: DEHP, BBP, DBP and DIBP: 1000 ppm
IEC Definition of Halogen-Free
According to the International Electrochemical Commission's (IEC) Definition of Halogen-Free IEC 61249-2-21, the following limit values are not exceeded:
- maximum chlorine: 900 ppm
- maximum bromine: 900 ppm
- maximum total halogens (chlorine + bromine): 1500 ppm
Disclaimer
All information in this declaration is given to the best of our present knowledge and belief. The information given doesn't imply giving a warranty within the meaning of the warranty law.
Signed for and on behalf of Sensirion AG
Staefa, 19 August 2025
Dr. Adrian Ruf
EHS Manager