Sensirion AG
Laubisruetistrasse 50
8712 Staefa,
Switzerland
RoHS, REACH and Hal-Free - Declaration
We declare that all these Differential Pressure Sensor for Gases supplied by Sensirion AG comply with:
Differential Pressure Sensor | REACH | RoHS | Halogen-Free |
---|---|---|---|
ASP1400 | yes | yes | no |
SDP1xxx | yes | yes | no |
SDP2xxx | yes | yes | no |
SDP3x | yes | yes | yes |
SDP5xx | yes | yes | no |
SDP6xx | yes | yes | no |
SDP7xx | yes | yes | no |
SDP8xx | yes | yes | no |
SDP600/SDP800 series cap | yes | yes | yes |
Eval-Kits: EK-P4, SEK-SDP31, SEK-SDP8xx | yes | yes | no |
- The EU regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals, REACH (Reg. 1907/2006 /EC), i.e. the following limit values are not exceeded:
- Substances of Very High Concerns (SVHC) - 1000 ppm
The information is based on data provided by our suppliers. No attempt has been made to verify this information by third party analysis.
- The EU regulation on the Restriction of Hazardous Substances in electrical and electronic equipment, RoHS (Reg. 2011/65/EU and the delegated directive 2015/863/EU), i.e. the following limit values are not exceeded:
- Lead (Pb), Mercury (Hg), Hexavalent Chromium (CrVI) - 1000 ppm
- Cadmium (Cd) - 100 ppm
- Polybrominated biphenyls (PBB) and Polybrominated diphenyl ethers (PBDE) - 1000 ppm
- Phthalates: DEHP, BBP, DBP and DIBP - 1000 ppm
- Copper alloy in the plugs of the eval-kits compliant with exception 6c of 2011/65/EU.
- The International Electrochemical Commission's (IEC) Definition of Halogen-Free IEC 61249-2-21, i.e. the following limit values are not exceeded:
- maximum chlorine - 900 ppm
- maximum bromine - 900 ppm
- maximum total halogens (chlorine + bromine) - 1500 ppm
Disclaimer
All information in this declaration is given to the best of our present knowledge and belief. The information given doesn't imply giving a warranty within the meaning of the warranty law.