Blackview MP60 Series
FCC Compliance Information
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2A7DX-MP10DP00
RF Specification
| Function | Operation Frequency | Max RF output power | Limit |
|---|---|---|---|
| BLE | 2402MHz-2480MHz | 4.37 dBm | 20 dBm |
| BT(BR+EDR) | 2402MHz-2480MHz | 6.58 dBm | 20 dBm |
| WIFI 802.11b/g/n(HT20/40) | 802.11b/g/n(20MHz): 2412~2472MHz; 802.11n(40MHz):2422~2462MHz | 16.3 dBm | 20 dBm |
| Wi-Fi 5.2G(802.11a/n20/n 40/ac20/ac40/ac80) | 802.11a/n20/ac20:5180MHz~5240MHz 802.11 n40/ac40:5190MHz~5230MHz 802.11 ac80:5210MHz | 9.39 dBm | 23 dBm |
| Wi-Fi 5.8G(802.11a/n20/n 40/ac20/ac40/ac80) | 802.11a/n20/ac20:5180MHz~5240MHz 802.11 n40/ac40:5190MHz~5230MHz 802.11 ac80:5210MHz | 9.62 dBm | 23 dBm |
Warnings and Restrictions
Warning: Use caution with earphones; excessive sound pressure can cause hearing loss.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- The product shall only be connected to a USB interface of version USB2.0.
- Adapter shall be installed near the equipment and shall be easily accessible.
- Operation temperature: -10~40°C.
- The plug is considered the disconnect device of the adapter.
- SAR: The device complies with RF specifications when used at 0.5cm from your body (SAR limit 2.0 W/Kg). The device is in compliance with the requirements.
Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, this radio equipment is subject to some restrictions when placed on the market in the following countries:
Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).
[restricted use symbol] Country Code List:
