Olight PL-Mini Valkyrie 2 User Manual

Introduction

Thank you for purchasing this Olight Product. Before use, please read the manual carefully!

Inside the Box

• PL-MINI VALKYRIE 2
• T6/T8 Socket Head Wrench
• Picatinny (Mil-std-1913) Rail Mount
• MCC Special (Magnetic Charging Cable)
• User Manual

Specifications

• Material: 6061-T6 aluminum alloy, Type III hard anodizing.
• Brightness: 600-60 lumens
• Range: 100m
• Candela: 2,500cd
• Waterproof: IPX6
• Drop Resistance: 1m
• Dimensions: 2.07*1.26*1.28 in / 52.5*32*32.5 mm
• Weight: 73g / 2.57 oz

Charging

Before your first use, fully charge the light with the supplied magnetic charging cable. When the battery level is low while turned on, the side indicator will turn red. Please charge again at that time.

1. Connect the provided magnetic charging cable to a USB power source or any USB port.
2. Connect the round magnetic end of the charger to the magnetic port on the bottom of the PL-Mini 2.
3. The indicator on the charging cable is red while charging and will turn green when fully charged.

Operation

The ambidextrous switch on the PL-MINI 2 can only be pressed down to activate the light. Pressing the side or front of the switch will not turn it on.

• Momentary ON: Press and hold down either switch for momentary on. The light will stay on until the switch is released.
• On/Off: Single click either switch for constant on. Single click again to turn the light off.

Light Installation

Check your firearm compatibility and choose the correct sized rail adapter. This light can be installed on a MIL-STD-1913 or Glock style rail with an available notch. The Glock adapter labeled GL is already installed, which can be immediately used on all Glock sized rails. For firearms using Picatinny (mil-std-1913) rails, the user must replace the GL adapter with the included 1913 adapter using the screws and socket head wrench provided in the package.

Safety Warnings

DANGER

• Do not shine the light directly into human eyes. This may cause temporary blindness or even permanent damage to the eyes.
• Do not charge this product with other charging cables except the one included in the original packaging.

NOTICE

• Fully charge the battery before storing the light for a long period of time.
• Please keep the charging port clean. Wipe any dust off before the charge.
• The LED light will work for one minute at the top output mode and gradually step down to 60 lumens within 10 minutes.
• The two triggers can only be activated by pushing downward. Pushing forward or on the side of the switch will not activate the light.
• Always keep the LED light firmly attached to the firearm to protect from any damage or misuse.
• The PL-MINI 2 can only charge using the included magnetic charging cable (The same magnetic charging cable as PL-MINI). This cable is proprietary for this LED light and cannot be used with any other Olight products.
• The Glock adapter labelled GL is already installed, which can be directly installed on Glock handguns. For firearms using Picatinny (mil-std-1913) rails, the user needs to replace the GL adapter with the included 1913 adapter using the screws and socket head wrench provided in the package.

EU Declaration of Conformity

EU-Declaration of Conformity can be found here: https://olightworld.com/ec-declaration

Warranty

• Within 30 days of purchase: Return to the original seller for repair or replacement.
• Within 2 years of purchase: Return to Olight for repair or replacement.

This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.

Customer Support

• USA Customer Support: cs@olightstore.com
• Global Customer Support: Customer-service@olightworld.com

Visit www.olightworld.com to see the complete product line of portable illumination tools.