❗ CAUTION!
Installation and connection should only be carried out by a qualified person.
- Only qualified electricians or authorised service staff are permitted to open the thermostat.
- If the thermostat is used in a way not specified by the manufacturer, its safety may be impaired.
- Prior to setting the thermostat, it is necessary to complete all required settings described in the section.
This thermostat can be mounted directly on wall.
Installation Steps
Step 1: Product Overview and Specifications
The RFRP-HW-OT is a wireless cylinder thermostat. It features a digital display and control buttons.
Dimensions: Width 131mm, Height 100mm.
Certifications and Ratings:
- CE Marking
- Type 1C (Standard: EN60730)
- IP20 (Standard: EN60529)
- Operating Temperature: 0°C to 45°C (32°F to 113°F)
- Operating Humidity: 5% to 95% Relative Humidity (RH)
Step 2: Probe Installation
This step details the installation of the temperature probe.
Probe Dimensions: Length 1950±80mm, Diameter 25mm.
Step 3: Prepare Mounting Bracket
The illustration shows the mounting bracket and screws required for installation.
Step 4: Attach Mounting Bracket to Thermostat
This step illustrates how to attach the mounting plate to the back of the thermostat unit.
Step 5: Open Battery Compartment
The illustration shows how to open the battery compartment cover on the thermostat.
Step 6: Install Batteries
The illustration shows the correct method for inserting batteries into the compartment.
