ZKTeco SpeedFace-V3L Installation Guide

Version: 1.0

Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.

How to Install the Device?

Installation Environment

Please refer to the following recommendations for installation.

KEEP DISTANCE [distance icon]
AVOID GLASS REFRACTION [refraction icon]
AVOID DIRECT SUNLIGHT AND EXPOSURE [sun icon]
KEEP EFFECTIVE DISTANCE 0.3-2.5m [distance icon]

Device Installation

Attach the mounting template sticker to the wall, and drill holes according to the mounting paper.
Fix the backplate on the wall using wall mounting screws.
Attach the device to the backplate.
Fasten the device to the backplate with a security screw.

Diagram showing mounting steps with measurements (1.5m height).

Wiring Diagram

Power Connection

Diagram illustrating power connection with a 12V adapter.

Recommended AC Adapter:

12V ± 10%, at least 1500mA.
To share the power with other devices, use an AC Adapter with higher current ratings.

Ethernet Connection

Connect the device and computer software over an Ethernet cable. As shown in the example below:

Diagram showing Ethernet connection between the device and a computer running ZKBio Access software.

Default IP address: 192.168.1.201, Subnet mask: 255.255.255.0

IP address: 192.168.1.130, Subnet mask: 255.255.255.0

Click on [COMM.] > [Ethernet] > [IP Address], input the IP address and click on [OK].

Note: In LAN, the IP addresses of the server (PC) and the device must be in the same network segment when connecting to the ZKBio Access software.

Wiegand Reader Connection

Diagram showing Wiegand reader connection to the Access Controller.

Note: 485A and 485B can be connected to the Barrier gate or the 485 Reader separately, but cannot be connected to the gate and reader at the same time.

RS485 Connection

Diagram showing RS485 connection to a 485 Reader.

Door Sensor, Exit Button, Alarm & Auxiliary Connection

Diagram illustrating connections for Door Sensor, Exit Button, Smoke Detector, and Alarm.

Lock Relay Connection

The system supports Normally Opened Lock and Normally Closed Lock. The NO LOCK (normally unlocked when power-on) is connected with 'NO' and 'COM' terminals, and the NC LOCK (normally locked when power-on) is connected with 'NC' and 'COM' terminals. Take NC Lock as an example below:

1) Device not sharing power with the lock

Diagram showing NC Lock connection without sharing power, including polarity warning.

2) Device sharing power with the lock

Diagram showing NC Lock connection while sharing power.

Maximum 30V 3A input.

Download Center

Scan the QR Code to download the User Manual, Installation Guide and Quick Start Guide.

QR Code (Download Center) [QR Code Image]

Contact Information

ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.

Phone: +86 769 - 82109991

Fax: +86 755 - 89602394

Website: www.zkteco.com

	ZKTeco SpeedFace-V3L Quick Start Guide A concise guide to installing and setting up the ZKTeco SpeedFace-V3L biometric access control and time attendance device, covering overview, installation, connections, and user registration.
	ZKTeco SpeedFace-V3L User Manual: Biometric Access Control & Facial Recognition Guide Comprehensive user manual for the ZKTeco SpeedFace-V3L, a state-of-the-art biometric access control and time attendance device featuring advanced facial recognition and fingerprint scanning technology. Learn about installation, operation, safety guidelines, and system settings.
	SpeedFace-V5L-RFID User Manual - ZKTeco Comprehensive user manual for the ZKTeco SpeedFace-V5L-RFID device, covering installation, operation, system settings, and access control features. Learn how to set up and utilize this advanced biometric security solution.
	ZKTeco SpeedFace-V5L[QR] Series Quick Start Guide A comprehensive quick start guide for the ZKTeco SpeedFace-V5L[QR] Series, covering device overview, installation, connections, user registration, and settings for access control and attendance.
	ZKTeco SpeedFace V3L Lite: Facial & RFID Access Control Terminal The ZKTeco SpeedFace V3L Lite is a cost-effective, IP65-rated outdoor access control terminal offering advanced facial and RFID authentication for time attendance and security. It integrates seamlessly with ZKTeco software and features a compact design.
	ZKTeco SpeedFace-V5L Series: Advanced Biometric Access Control and Time Attendance Terminal Explore the ZKTeco SpeedFace-V5L Series, an advanced Linux-based hybrid-biometric access control and time attendance terminal. Featuring touchless facial recognition, anti-spoofing technology, video intercom, and multiple authentication methods for enhanced security and efficiency.
	ZKTeco SpeedFace-V3L Installation Guide Comprehensive installation guide for the ZKTeco SpeedFace-V3L biometric access control device, covering installation environment, device setup, wiring, and connections.
	ZKTeco SenseFace 2A User Manual - Biometric Access Control & Time Attendance Explore the ZKTeco SenseFace 2A user manual for detailed guidance on installation, operation, system settings, and advanced biometric security features. Learn about ZKTeco's leading facial recognition and access control solutions.