ZKTeco SpeedFace-V5L[QR] Series Quick Start Guide

Overview

The SpeedFace-V5L[QR] series devices are advanced biometric terminals for access control and time attendance.

Device Components:

• Front View: Flash, Camera & Palm Collector, Microphone, 5" Touchscreen, QR Code Scanner, Speaker, Reset Button.
• Back View: Magnetic Tamper Switch.

Connection Interfaces:

• Power In: 12V, GND
• RS232: RXD2, TXD2, GND, TXD, RXD
• RS485: 485A, 485B, GND
• Ethernet: TX+, TX-, RX+, RX-
• Auxiliary Input: AUX, GND, SEN, GND, BUT, NO1, COM, NC1, AL+, AL-

Note: Not all products have all functions; the real product shall prevail.

Device Variants

• SpeedFace-V5L[QR][TD]: Features a Thermal Infrared Temperature Measurement Module.
• SpeedFace-V5L[QR][TI]: Features a Thermal Imaging Temperature Detection Module.

Installation Environment

Recommendations for optimal installation:

• Install indoors only. ?
• Avoid installation near glass windows. ?❌
• Avoid direct sunlight and exposure. ☀️❌
• Avoid use of any heat source near the device. ?❌

Recommended Palm Gestures

• Keep effective distance of 30 to 50 cm. ?
• Keep spaces between your fingers. ?️
• Do not keep your fingers close. ?️❌
• Do not keep palm outside the collection area. ?️❌
• Do not keep your fingers fold/curled. ?️❌

Note:

1. Place your palm within 30 to 50 cm of the device.
2. Place your palm in the palm collection area, such that the palm is placed parallel to the device.
3. Make sure to keep space between your fingers.

Recommended Standing Position

• Keep effective distance of 0.3 to 2m. ?

Installation Requirements

Note: The temperature measurement data is only for reference, and not for any medical purposes.

Forehead Temperature Detection

Indoor constant Temperature Environment:

• Installation height: 1.55m
• FOV (Field Of View) of the thermal imaging device: 50°
• Temperature detection distance: 0.3m to 1.2m
• Height of the face adapted for detection: 1.2m to 2m

Device Installation

Example: SpeedFace-V5L[QR][TI]

1. Attach the mounting template sticker to the wall, and drill holes according to the mounting paper. Fix the back plate on the wall using wall mounting screws.
2. Attach the device to the back plate.
3. Fasten the device to the back plate with a security screw.

Standalone Installation Diagram:

Illustrates connections for Door Sensor, Lock, Card Reader, Alarm, Smoke Detector, and Exit Button, with TCP/IP connection to a PC.

Power Connection

Recommended power supply:

• 12V ± 10%, at least 3,000mA.
• For sharing power with other devices, use a power supply with higher current ratings.

Diagram shows a 12V DC power connection.

Ethernet Connection

Default IP address: 192.168.1.201, Subnet mask: 255.255.255.0

ZKBioSecurity IP address: 192.168.1.130, Subnet mask: 255.255.255.0

To set the IP address: Click [COMM.] > [Ethernet] > [IP Address], input the IP address and click [OK].

Note: In LAN, IP addresses of the server (PC) and the device must be in the same network segment when connecting to ZKBioSecurity software.

Door Sensor, Exit Button & Alarm Connection

Diagram shows connections for Door Sensor, Smoke Detector, Exit Button, and Alarm, including wiring to COM, AUX, NO, GND, SEN, BUT, NO1, NC1, AL+, AL- terminals.

Lock Relay Connection

The system supports both Normally Opened (NO) Lock and Normally Closed (NC) Lock.

• NO Lock: Connected with 'NO1' and 'COM' terminals.
• NC Lock: Connected with 'NC1' and 'COM' terminals.

Power can be shared with the lock or used separately. Examples provided for NC Lock connection, both with and without power sharing.

Wiegand Reader Connection

Wiegand card reader connects to the top 4 pins of the wiegand terminal. The last two pins are used by the Access controller. It sends credentials via wiegand communication.

Diagram shows connection to an Access Controller.

RS485 and RS232 Connection

Allows connection of multiple readers. Two RS232 and one RS485 can be connected.

Diagram shows connections for RS232 and RS485 readers.

User Registration

Method 1: Register on the device

Navigate to > [User Mgt.] > [New User]. Options include User ID, Name, User Role, Palm, Face, Card Number, Password, and Profile Photo.

Screenshots show the device interface for user registration, including palm and face enrollment.

Method 2: Register on ZKBioSecurity software

1. In the software, go to [Access] > [Access Device] > [Device] > [Search Device].
2. Click [Add] to configure Icon type, Area, and Add to Level.
3. Register new users via [Personnel] > [Person] > [New].
4. Synchronize data using [Access] > [Device] > [Device Control] > [Synchronize All Data to Devices].

Refer to the ZKBioSecurity User Manual for more details.

Method 3: Register on the phone

1. In ZKBioSecurity software, go to [Personnel] > [Parameters] and input the server address and port to generate a QR code.
2. Scan the QR code or visit the provided URL on a mobile phone to register users.
3. Users can be managed via [Personnel] > [Temporary Personnel] > [Review].

Screenshots illustrate the mobile registration process and user management interface.

Ethernet and Cloud Server Settings

Network Parameters: Click > [COMM.] > [Ethernet] to set network parameters. A successful TCP/IP connection is indicated by a specific icon.

Cloud Server Settings: Click > [COMM.] > [Cloud Server Setting] to set the server address and port. Successful communication is indicated by a specific icon.

Screenshots show the Ethernet and Cloud Server Setting interfaces.

Note: Ensure 'Enable Domain Name' is disabled and the correct server address and port are entered when pairing with ZKBioSecurity software.

• Server Address: IP address of the ZKBioSecurity server.
• Server Port: Service port of ZKBioSecurity (default is 6609).

Access Control Setting

Navigate to > [Access Control] to configure access control parameters.

Options include Access Control Options, Time Rule setting, Holidays, Verification Mode, Anti-passback Setup, Duress Options, etc.

Screenshots show the Access Control interface and its options.

Attendance Record

Navigate to > [Attendance Search] > [Event Logs] to query attendance logs.

Users can input User ID and select a time range to view event logs.

Screenshots display the attendance search interface and sample event logs.

Detection Management Settings

Navigate to > [System] > [Detection Management] to configure settings.

• Set high temperature alarm threshold, enable temperature over range access denial, and trigger external alarm.
• Optionally enable 'Capture of unregistered person' to save temperature data for unregistered individuals.
• Mask detection can also be enabled and configured.

Screenshots show the Detection Management interface and examples of normal and high-temperature readings, with and without masks.

Notes on Temperature Detection

• Effective distance for temperature detection is within 50cm.
• Recommended for indoor use.
• Temperature data is for reference only, not for medical use.
• Masks may affect facial recognition; palm verification is recommended for masked individuals.

Diagram illustrates effective distances for Temperature, Palm, and Face detection.

Real-time monitoring on the ZKBioSecurity software

Users can perform temperature detection management via the ZKBioSecurity software.

1. Set IP address and cloud server address on the device and add it to the software.
2. View real-time monitoring of events like Abnormal Temperature, No Masks, and Normal Records via [Temperature Detection] > [Temperature Management] > [Real-time monitoring].
3. Analyze statistical data and view personnel with normal temperatures via [Temperature Management] > [Statistics Panel].

Screenshots show the Real-Time Monitoring and Statistics Panel interfaces.

QR Code Verification

Configuration: In ZKBioSecurity software, go to [System] > [Basic Management] > [Parameters] and set 'Enable QR Code' to 'Yes'.

Server Setup: Choose [System] > [Authority Management] > [Client Register] to add an App client.

Mobile App Usage: Enter server IP/domain and port in the app. Scan the QR code of the app client. Tap 'Employee' to log in with Employee ID and Password.

Mobile Credential: Tap [Mobile Credential] on the app to display a QR code. Align the phone screen with the device's QR code scanner.

Note: Place phone within 15 to 50cm of the device. Do not block the scanner or the QR code on the phone.

Diagrams show the server setting, mobile app interface, and QR code scanning process.