Braeburn 2020NC Single Stage Heat / Cool Conventional or Heat Pump 5-2 Day Programmable Thermostat
This document outlines the features, specifications, and compatibility of the Braeburn 2020NC programmable thermostat.
Features
- 5-2 Day Programming
- Large 2 Sq. In. Display with Bright Blue Backlight
- Adjustable Temperature Limits
- Hardwire or Battery Powered
- Permanent Memory Retains Settings
- Filter Check Monitor
- Adjustable Temperature Differential
- Adaptive Recovery Mode (ARM™)
- Meets Energy Aware® Guidelines*
- ESD Guard™ Electronic Circuitry
- Compressor Short Cycle Protection
- Temporary Program Override
- Programmable Extended Hold Mode
- Front Access Reset Button
- F° / C° Switch
- English / Spanish Packaging and Instruction Card with FREE Contractor Branding
FREE Contractor Branding! Visit braeburnonline.com for more information.
*As a licensee in the Energy Aware Programmable Thermostat Program, Braeburn Systems LLC has determined that this product meets the NEMA Energy Aware efficiency specifications for programmable thermostats. Visit www.getenergyaware.com for more information.
Terminal Designations
Heat 24 Volt AC Transformer
Cool 24 Volt AC Transformer
Reversing Valve Cool Active
Reversing Valve Heat Active
Cool Control
Heat Control
Fan Control
Transformer Common
Architectural Specifications
The digital programmable thermostat shall be a Braeburn® model number 2020NC. It measures 3.62 inches high x 4.72 inches wide x 1.38 inches deep. Power is supplied independently by either a 24 Volt AC source or two "AA" alkaline batteries (3.0 Volt DC). The thermostat is compatible with single-stage gas, oil, or electric heating or cooling systems, including single-stage heat pumps and 250mV-750mV millivolt heating systems. Key features include a bright blue backlight display and a separate sub-base for easy installation. The temperature control range is between 45° and 90°F (7° and 32°C) with an accuracy of +/- 1°F (+/- 0.5°C). The operating humidity range is between 5% and 95% relative humidity. The thermostat includes non-volatile memory for retaining user settings, adjustable temperature limits, a filter check monitor, and Adaptive Recovery Mode (ARM™). It allows for separate heating and cooling setpoint program times and temperatures. The thermostat provides a low battery indication. A front-mounted reset button will return all user and program settings to default values when pressed. The thermostat can be mounted to a horizontal junction box and meets California Title 24 and Energy Aware® Guidelines.
Product Specifications
| Dimensions: | 3.62" x 4.72" x 1.38" |
|---|---|
| Electric Rating: | 24 Volt AC (18-30 Volt AC) 1 amp maximum load per terminal 3 amp total maximum load (all terminals) |
| AC Power: | 18-30 Volt AC |
| DC Power: | 3.0 Volts DC (2 "AA" Alkaline batteries included) |
| Compatibility: | Single stage gas, oil or electric systems Single stage heat pump systems 250mv – 750mv millivolt heating systems |
| Control Range: | 45° to 90°F (7° to 32°C) |
| Display Range: | 40° to 99°F (5° to 37°C) |
| Accuracy: | +/- 1°F (+/- 0.5°C) |
| Temperature Differential: | 1st Stage - 0.5°, 1°, or 2°F (0.25°, 0.5°, or 1°C) 2nd Stage - 2°, 3°, 4°, 5°, or 6°F (1°, 1.5°, 2°, 2.5°, or 3°C) |
| Storage Temperature: | 14° to 140°F (-10° to 60°C) |
| Operating Humidity: | 5% to 95% Relative Humidity |
| Terminations: | Rc, Rh, O, B, Y1, W1, G, C |
Shipping Information
INDIVIDUAL CARTON
- Dimensions: 3.8" x 5.8" x 1.6"
- Weight: 0.70 lbs.
MASTER CARTON
- Quantity: 12
- Dimensions: 11" x 11.7" x 4.3"
- Cubic Feet: 0.32
- Weight: 9.2 lbs.
Braeburn 2020NC Replaces*
- Honeywell® TH2110
- White-Rodgers® 1F78-151, 1E78-151
*Verify specific application requirements. All trademarks are the property of their respective owners.
Accessories
- 2950 Universal Wall Plate (6.5" x 6.5" x 0.125")
- 5970 Universal Thermostat Guard
FREE Contractor Branding Available!
Visit the Braeburn website (www.braeburnonline.com) for more information, contact your local distributor, or call the sales department toll-free at 866.268.5599 (U.S.) or +1.630.844.1968 (Outside the U.S.).
Job Information
Date: _____________________________________________ Job Name: _________________________________________ Location: __________________________________________ Contractor: ________________________________________
Engineer: __________________________________________ Model No.: _________________________________________ Submitted By: ______________________________________ Submitted For Approval: ___________ Record: ___________
