G3 Starter Kit Pro Installation Guide

Product Components

The G3 Starter Kit Pro includes the following key components:

• Door Hub
• Pocket Keyfob
• G3 Reader Pro
• G3 Reader

System Network Integration

The UniFi G3 Starter Kit Pro is designed to integrate into a network infrastructure. The typical flow is:

• Internet ?
• UniFi Cloud Gateway (connects to the internet)
• Switching (network switches for connectivity)

Devices are powered and connected via Power over Ethernet (PoE). The Door Hub specifically utilizes PoE++.

Device Connectivity and Wiring

Component connections are established as follows:

• Door Hub: Connects via PoE++
• G3 Reader Pro: Connects via PoE
• G3 Reader: Connects via PoE

For installation, refer to the following wiring terminals on the devices:

Door Operator Connections

• COM (Common), NO (Normally Open), NC (Normally Closed)

Siren/Chime Connections

• COM (Common), NO (Normally Open), NC (Normally Closed)

Lock Connections

• COM (Common), NO (Normally Open), NC (Normally Closed)

Additional Terminals

• MOTION BUTTON
• DOOR POSITION
• AUX (Auxiliary input)
• EMERGENCY input

Mobile Application Setup

To manage your UniFi G3 Starter Kit Pro system, download the UniFi Access application:

Download on the App Store

GET IT ON Google Play

Access Management

The system facilitates access management, often visualized through a mobile interface displaying an 'Access' screen.

Support and Assistance

For further assistance or troubleshooting, visit the Help Center or contact Ubiquiti Support.