UniFi G3 Wireless Handset

Product Overview

A sleek, black, ergonomically designed wireless handset with a curved body and a small screen on the front.

The UniFi G3 Wireless Handset is a BLE wireless handset featuring a 0.96" touch display for battery life and signal strength indication. It integrates with the UniFi Talk application, providing a seamless communication experience.

Specifications

Mechanical

Hardware

Software

Safety and Compliance

This section summarizes important safety, electrical, and radiation exposure information. For full details and language-specific notices, please refer to the original documentation.

General Safety Notices

• Instructions: Read, follow, and keep all instructions.
• Warnings: Heed all warnings.
• Accessories: Use only manufacturer-specified attachments/accessories.
• Ventilation: ⚠️ Ensure at least 20 mm clearance around ventilation holes for adequate airflow to prevent fire hazards.
• Weather Exposure: ⚠️ Do not expose to rain or moisture to reduce the risk of fire or electric shock.
• Water Submersion: ⚠️ Do not use in locations that can be submerged by water.
• Electrical Storms: ⚠️ Avoid using during electrical storms due to the remote risk of electric shock from lightning.

Battery Warning

• Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
• Use only manufacturer-recommended batteries to prevent explosion risk.

Electrical Safety Information

• Compliance with voltage, frequency, and current requirements on the manufacturer's label is mandatory.
• Connecting to non-specified power sources may lead to improper operation, equipment damage, or fire hazard.
• Service must be performed only by qualified service technicians.
• The equipment includes a detachable power cord with an integral safety ground wire for connection to a grounded safety outlet.
• Never substitute the power cord with a non-approved type. Do not use adapter plugs with 2-wire outlets, as this defeats the grounding continuity.
• Modification or misuse can result in serious injury or death due to shock hazard.
• Contact a qualified electrician or the manufacturer for installation questions before connecting the equipment.
• Protective earthing is provided by the listed AC adapter. Building installation must provide appropriate short-circuit backup protection.
• Protective bonding must be installed in accordance with local national wiring rules and regulations.

Radiation Exposure Statement

• Install and operate with a minimum distance of 20 cm between the radiator and your body.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Operating Frequency and Power

• Operating Frequency (MHz): 2400-2483.5
• Max. RF Output Power: 20 dBm

Declaration of Conformity

UBIQUITI declares that this device, UT-G3-Handset, complies with the essential requirements and other relevant provisions of applicable directives (e.g., 2014/53/EU, 2014/30/EU, 2014/35/EU, UK Regulations). The device's software cannot affect conformity, even if changed or replaced. The full text of the EU/UK declarations of conformity and detailed compliance information are available at: ui.com/compliance.

Manufacturer Information

Ubiquiti International Holding B.V., Ekkersrijt 3102, Son, Netherlands.

Ubiquiti Distribution UK Limited, 2 New Street Square, London, United Kingdom.