Cooper&Hunter Air Conditioner: CH-RES09-115VO + CH-R09OLVWM-115VI
This document provides technical specifications and key features for the Cooper&Hunter split system air conditioner models CH-RES09-115VO and CH-R09OLVWM-115VI.
Key Features
- Auto-Swing for horizontal louvers
- Genius Core ultra-low compressor speed of 12Hz
- 46° Freeze Protection
- Smart Kit Ready
- Turbo Mode
- Follow Me Mode
- Smart kit Included
Product Overview & Certifications
The product includes both an indoor and an outdoor unit. It is certified by AHRI, ENERGY STAR, and Intertek, and features R454B refrigerant compatibility and GoldFin technology.
Indoor Unit Specifications (CH-R09OLVWM-115VI)
| Parameter | Value | Unit |
|---|---|---|
| Model | CH-R09OLVWM-115VI | |
| Power Supply | 115V, 1Ph, 60Hz | |
| Communication Wiring | AWG 14-4 | |
| Cooling Capacity | 9,000 (2,600~13,000) | Btu/h |
| Cooling Input | 660 (180~1,080) | W |
| Cooling Rated Current | 6.9 (1.9~9.8) | A |
| Cooling EER/EER2 | Btu/w | |
| Cooling SEER/SEER2 | Btu/w | |
| Heating Capacity at 47 °F | 10,000 (4,500~12,800) | Btu/h |
| Heating Input at 47 °F | 698 (280~980) | W |
| Heating Rated Current at 47 °F | 7.6 (1.5~9.2) | A |
| Heating COP at 47 °F | 4.2 | W/W |
| HSPF4/HSPF2-4 | 10.7 | |
| HSPF5/HSPF2-5 | 8.2 | |
| Indoor Fan Motor Qty | 1 | |
| Indoor Fan Motor Input | 20 | W |
| Indoor Fan Motor RLA | 0.6 | A |
| Indoor Air Flow (Turbo/Hi/Med/Lo) | 370.8 / 306.1 / 235.4 / 188.4 | CFM |
| ESP (range) | / | In.wg. |
| Indoor Noise Level (Hi/Med/Lo) | 40.5/35/26.5 | dB(A) |
| Dehumidification | 1.69 | L/H |
| Indoor Unit Dimensions (WxDxH) | 31.57 x 7.87 x 11.61 | inch |
| Indoor Unit Packing (WxDxH) | 34.45 x 11.22 x 14.96 | inch |
| Indoor Unit Net/Gross Weight | 19.84/26.01 | lbs |
| Drainage Water Pipe Diameter | 5/8" | inch |
| Refrigerant Piping (Liquid/Gas) | 1/4"/3/8" | inch |
| Design Pressure | 550/340 | PSIG |
| Controller | Remote Controller | |
| Room Temperature (Cooling) | 60~90 | F |
| Room Temperature (Heating) | 32~86 | F |
Outdoor Unit Specifications (CH-RES09-115VO)
| Parameter | Value | Unit |
|---|---|---|
| Model | CH-RES09-115VO | |
| Power Supply | 115V, 1Ph, 60Hz | |
| Min. Circuit Ampacity | 18 | A |
| Max. Fuse | 20 | A |
| Compressor Model | KSK103D33UEZ3 | |
| Compressor Type | ROTARY | |
| Compressor Brand | GMCC | |
| Compressor Capacity | 11.1 | Btu/h |
| Compressor Input | 826 | W |
| Compressor Rated Current (RLA) | 14 | A |
| Refrigerant Oil | VG74 10.5 | oz |
| Outdoor Fan Motor Qty | 1 | |
| Outdoor Fan Motor Input | 34 | W |
| Outdoor Fan Motor RLA | 0.6 | A |
| Outdoor Fan Speed | 850/700/600 | r/min |
| Outdoor Air Flow (Max) | 1,235.3 | CFM |
| Outdoor Noise Level (Max) | 53 | dB(A) |
| Throttle Type | EXV | |
| Outdoor Unit Dimensions (WxDxH) | 30.12 x 11.93 x 21.85 | inch |
| Outdoor Unit Packing (WxDxH) | 34.92 x 13.27 x 24.02 | inch |
| Outdoor Unit Net/Gross Weight | 64.59/70.11 | inch |
| Refrigerant Type | R454B | |
| Refrigerant Precharge | 25 | ft |
| Additional Charge for 1/4 inch Liquid Pipe | 0.16 | oz |
| Additional Charge for 3/8 inch Liquid Pipe | / | oz |
| Refrigerant Piping (Liquid/Gas) | 1/4"/3/8" | inch |
| Max. Pipe Length | 82 | ft |
| Max. Difference in Level | 49.2 | ft |
| Ambient Temperature (Cooling) | -13 ~ 122 | F |
| Ambient Temperature (Heating) | -13~75 | F |
Installation Dimensions and Notes
Indoor Unit Installation:The document illustrates selecting an installation location for the indoor unit, detailing required clearances and dimensions. It highlights four options for the piping exit direction (left rear, right rear, left-hand side, right-hand side) based on the wall hole's position relative to the mounting plate.
Indoor Unit Dimensions: The indoor unit measures 31.7in (806mm) in width and 11.65in (296mm) in height. Diagrams indicate necessary clearances, such as 4-3/4" (12cm) from the top and bottom.
Wall Hole Requirement: For pipes with a gas side diameter of 5/8in (16mm) or larger, the wall hole should be 3-1/2in (90mm).
Outdoor Unit Dimensions: Key dimensions for the outdoor unit include Width (W) of 30-1/8in (765mm), Width 1 (W1) of 32-7/8in (835mm), Width 3 (W3) of 30-7/8in (784mm), Height (H) of 21-7/8in (555mm), and Depth (D) of 11-7/8in (303mm). Additional specific dimensions (A, B, C, D, A1, A2) are also provided.
