Cooper&Hunter Air Conditioner
CH-RES12-230VO + CH-R12MOLVWM-230VI
This document provides key features, specifications, and installation dimension information for the Cooper&Hunter CH-RES12-230VO and CH-R12MOLVWM-230VI air conditioning units.
Placeholder Fields: Job Name, Location, Engineer, Submitted to, Submitted by, Reference, Date, Approval, Construction, Unit #, Drawing #, Notes.
Key Features
- Auto-Swing for horizontal louvers
- Genius Core ultra-low compressor speed of 12Hz
- 46° Freeze Protection
- Smart Kit Ready
- Turbo Mode
- Follow Me Mode
- Smart kit Included
Certifications: R454B CERTIFIED, ENERGY STAR, ETL, cETL, INVERTER, TUv.
Indoor Unit Specifications (Model: CH-R12MOLVWM-230VI)
| Specification | Value |
|---|---|
| Indoor Model | CH-R12MOLVWM-230VI |
| Power supply | 208-230V, 1Ph, 60Hz |
| Communication wiring | AWG 14-4 |
| Cooling Capacity | 12,000 (2,600~13,700) Btu/h |
| Cooling Input | 984 (175~1,210) W |
| Cooling Rated current | 4.5 (1.1~5.3) A |
| SEER/SEER2 | (Value not provided) |
| Heating Capacity | 12,000 (4,100~14,400) Btu/h |
| Heating Input | 953 (225~1,290) W |
| Heating Rated current | 4.3 (1.2~5.7) A |
| COP | 3.69 W/W |
| HSPF4/HSPF2-4 | 11.5 |
| HSPF5/HSPF2-5 | 8.5 |
| Indoor fan motor Qty | 1 |
| Indoor fan motor Input | 13 W |
| Indoor fan motor RLA | 0.5 A |
| Indoor air flow (Turbo/Hi/Med/Lo) | 382.6 / 294.3 / 194.2 / 153 CFM |
| ESP (range) | / In.wg. |
| Indoor noise level (Hi/Med/Lo) | 43/37/20 dB(A) |
| Dehumidification | 2.75 L/H |
| Indoor unit Dimensions (WxDxH) | 31.57 x 7.87 x 11.61 inch |
| Indoor unit Packing (WxDxH) | 34.45 x 11.22 x 14.96 inch |
| Indoor unit Net/Gross weight | 18.96/24.25 lbs |
| Drainage water pipe diameter | 5/8" inch |
| Refrigerant piping (Liquid side/Gas side) | 1/4"/3/8" inch |
| Design pressure | 550/340 PSIG |
| Controller | remote controller |
| Room temperature Cooling | 60~90 °F |
| Room temperature Heating | 32~86 °F |
Outdoor Unit Specifications (Model: CH-RES12-230VO)
| Specification | Value |
|---|---|
| Outdoor Model | CH-RES12-230VO |
| Power supply | 208-230V, 1Ph, 60Hz |
| Min. circuit ampacity | 12 A |
| Max. fuse | 15 A |
| Compressor Model | KSK103D33UEZ3 |
| Compressor Type | ROTARY |
| Compressor Brand | GMCC |
| Compressor Capacity | 11.1 Btu/h |
| Compressor Input | 826 W |
| Compressor Rated current (RLA) | 7.3 A |
| Compressor Refrigerant oil | VG74 10.5 OZ |
| Outdoor fan motor Qty | 1 |
| Outdoor fan motor Input | 34 W |
| Outdoor fan motor RLA | 0.6 A |
| Outdoor fan motor Speed | 800/700/600 r/min |
| Outdoor air flow (Max) | 1,235.3 CFM |
| Outdoor noise level (Max) | 54 dB(A) |
| Throttle type | EXV |
| Outdoor unit Dimensions (WxDxH) | 30.12 x 11.93 x 21.85 inch |
| Outdoor unit Packing (WxDxH) | 34.92 x 13.27 x 24.02 inch |
| Outdoor unit Net/Gross weight | 62.17/67.68 lbs |
| Refrigerant Type | R454B |
| Refrigerant Precharge | 25 ft |
| Additional charge for 1/4 inch liquid pipe | 0.16 OZ |
| Additional charge for 3/8 inch liquid pipe | / OZ |
| Refrigerant piping Liquid side/Gas side | 1/4"/3/8" inch |
| Refrigerant piping Max. pipe length | 82 ft |
| Refrigerant piping Max. difference in level | 49.2 ft |
| Ambient temperature Cooling | -13 ~ 122 °F |
| Ambient temperature Heating | -13 ~ 75 °F |
Installation Information
Indoor Unit Installation Location
The document provides guidance on selecting an installation location for the indoor unit. It illustrates clearance requirements:
- Top: 4-3/4 inches (12cm)
- Side: 6 inches (15cm)
- Bottom: 70 inches (180cm)
Four options for piping exit direction are shown: left-hand side, right-hand side, right rear, and left rear, depending on the wall hole's position relative to the mounting plate. The indoor unit dimensions are W: 31.7 inches (806mm) x H: 11.65 inches (296mm), with a pipe hole diameter of 2.5 inches (65mm). A note advises that if the gas side connective pipe is 5/8 inch (16mm) or larger, the wall hole should be 3-1/2 inches (90mm).
Outdoor Unit Dimensions
Diagrams display the front, side, and top views of the outdoor unit with key dimensions labeled:
- Width (W): 30-1/8 inches (765mm)
- Width (W1): 32-7/8 inches (835mm)
- Width (W3): 30-7/8 inches (784mm)
- Height (H): 21-7/8 inches (555mm)
- Depth (D): 11-7/8 inches (303mm)
- C: 12-3/8 inches (314mm)
- B: 11-1/4 inches (286mm)
- A: 17-3/4 inches (452mm)
- Detail A indicates measurements of 3/4 inch (18mm) and 1-1/4 inches (32mm).
